Huawei PDU8000 User Manual page 98

PDU8000 Modular Precision Power Distribution Cabinet
User Manual
Before replacement, ensure that the input and output switches are OFF, and that the upstream
and downstream switches are also OFF.


Procedure
Step 1 Open the front door of the PDC, turn off the input and output switches in the PDC, and turn
off the upstream and downstream switches.
Step 2 Remove the screws from the SPD panel and three output module panels, and set the screws
aside, as shown in
Figure 9-16 Removing the panel
Issue 01 (2016-02-27)
Tools required: a Phillips screwdriver, flat-head screwdriver, key to the PDC cabinet
door, and socket wrench set
Material required: new output modules
 Replacement order: from the top down.
 The following procedure describes how to replace the third output module of a fully configured
(three output modules) PDC. The procedures for replacing the first and second modules are similar.
 The figures are for reference only. The actual product appearance prevails.
Figure 9-16.
Group the removed screws by type to ensure correct reinstallation later.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Operation and Maintenance
92