Huawei PDU8000 User Manual page 44

PDU8000 Modular Precision Power Distribution Cabinet
User Manual
Step 6 Use diagonal pliers to cut cable inlet and outlet holes on rodent-proof meshes based on the
number and specifications of cables, as shown in
Figure 4-24 Cutting holes in the rodent-proof meshes
Step 7 Reinstall the rodent-proof meshes.
Step 8 (Optional) Seal cable inlets and outlets on the PDC using firestop putty.
Step 9 Reinstall the transparent covers of the input copper bar and N bar.


Figure 4-25 Position for the transparent cover of the input copper bar
(1) Position for the transparent cover of the input
copper bar
----End
Issue 01 (2016-02-27)
When installing the transparent cover for the N bar, verify that one side of the cover is flush with the
outer side of the N bar.
Install the transparent cover for the input copper bar as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-24.
Figure 4-25.
(2) Position for the fuse mounting
board
4 Installation Guide
38