PDU8000 Modular Precision Power Distribution Cabinet
User Manual
----End
4.7 Connecting Cables
Precautions
Cable Connections
The following describes how to connect cables in the dual-input, three-phase output, and
overhead cabling scenario as an example.
connection.
Figure 4-17 Overall cable connection effect
Step 1 Remove the transparent covers of the N bar and input copper bar, and keep the covers aside
for future use, as shown in
Issue 01 (2016-02-27)
Ensure that all circuit breakers, including upstream output circuit breakers, are switched
to OFF before connecting cables.
OT terminals must be coated with a heat shrink tubing.
Figure 4-18
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-17
shows the overall effect after cable
and
Figure
4-19.
4 Installation Guide
34