Clip Calling Line Identification Report; Cssu Unsolicited Supplementary Service Notification - Nokia 30 GSM Connectivity Terminal At Command Manual

Defined values
<type>:
FAX
VOICE
REL ASYNC
ASYNC
VOICE/REL ASYNC
ALT VOICE/REL ASYNC Alternating voice/data, voice first (BS 61)
ALT REL ASYNC/VOICE Alternating voice/data, data first (BS 61)
ALT VOICE/FAX
ALT FAX/VOICE

15.3.5 +CLIP Calling line identification report

Format Description
+CLIP: Given when +CLIP=1 and a number is received from the network when an MT call is
<number>, received (no active or held calls in ME)
<type>
The +CLIP result code is sent to the TE after every RING (or +CRING) result code. This
result code is enabled and disabled with the +CLIP command.
Defined values
<number> string type phone number of a format specified by <type>
<type> type of address octet in integer format (refer GSM 04.08 subclause 10.5.4.7):
129
145

15.3.6 +CSSU Unsolicited supplementary service notification

Format Description
+CSSU: <code> Given when +CSSN=,1 and some supplementary service notification is given by the
[,<index>[,<number>, network during an MT call setup or during a voice call; note that the remote release of
<type>]] a held call is also indicated with this result code
In the MT call setup case, the +CSSU result code is sent to the TE after every possible
+CLIP result code. In the case of a waiting call, this is given after the +CCWA result code but
Facsimile (TS 62)
Normal voice (TS 11)
Normal data
Normal data
Voice followed by data (BS 81)
Alternating voice/fax, voice first (TS 61)
Alternating voice/fax, fax first (TS 61)
unknown/telephony
international/telephony
87/107