Cmss Send Message From Storage - Nokia 30 GSM Connectivity Terminal At Command Manual

<scts> GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format
<length> The length of the actual TP data unit in octets (i.e. the RP layer SMSC address
octets are not counted in the length)
<ackpdu> GSM 03.40 RP-User-Data element of RP-ACK PDU
10.15

+CMSS SEND MESSAGE FROM STORAGE

Command
Execute +CMSS=<index>,
<da>,<toda>
Test +CMSS=?
Text mode:
The +CMSS command sends a message with the location value <index> from a preferred
message storage location <mem2> to the network (SMS-SUBMIT or SMS-COMMAND). If a
new recipient address <da> is given for the SMS-SUBMIT, it should be used instead of the
one stored with the message. The reference value <mr> is returned to the TE upon
successful delivery of a message. Optionally (when +CSMS <service> value is 1 and
network supports it), <scts> is returned. Values can be used to identify a message upon an
unsolicited delivery status report result code.
PDU mode:
The +CMSS command sends a message with the location value <index> from a message
storage location <mem2> to the network (SMS-SUBMIT or SMS-COMMAND). If the new
recipient address <da> is given for the SMS-SUBMIT, it should be used instead of the one
stored with the message. The reference value <mr> is returned to the TE when a message
has been delivered successfully. Optionally (when +CSMS <service> value is 1 and network
supports it), <ackpdu> is returned. Values can be used to identify a message upon an
unsolicited delivery status report result code.
Defined values
<index> integer type; a value in the range of the location numbers supported by the
associated memory
Response
Text mode (+CMGF=1) and sending ok:
+CMSS: <mr>[,<scts>]
PDU mode (+CMGF=0) and sending ok:
+CMSS: <mr>[,<ackpdu>]
Default +cms
error
[,"",129/145] x
69/107