17. EXAMPLE PROCEDURES ON SOME AT-COMMANDS
How to create a data call or send an SMS in text or PDU mode (and how to check the PIN
code or signal quality).
17.1 INPUTTING PIN CODE
The password (PIN, security code, etc.) status can be queried with the +CPIN? command. If
the response is READY, no password is required. If the response is SIM PIN, the Nokia 30 is
waiting for a PIN code. It is possible that more than one password is needed. The following
example indicates how the PIN code is given to the Nokia 30.
How to input PIN code:
Command from the DCE
AT+CPIN?<CR>
AT+CPIN="1234"<CR>
AT+CPIN?<CR>
How to check network registration (signal quality):
AT+CSQ<CR>
(*) Values for <rssi>
0
No network coverage (Check PIN code)
1-31
Signal strength
Response from
Explanation
the Nokia 30
-
Query about password status
+CPIN: SIM PIN
PIN code required
OK
Previous command was successful
-
Give PIN code 1234 to the Nokia 30
OK
Previous command was successful
-
Query about the password status
+CPIN: READY
No password required
OK
Previous command was successful
-
Query signal strength.
+CSQ:31, 99
Response +CSQ<rssi>, 99 (*)
101/107