Gprs Commands (Gsm 07.07); Supported Gprs User Context Id Values; Cgdcont Define Pdp Context - Nokia 30 GSM Connectivity Terminal At Command Manual

13. GPRS COMMANDS (GSM 07.07)

13.1 SUPPORTED GPRS USER CONTEXT ID VALUES

GPRS-specific capabilities differ between different products and phone generations. A
supported number of GPRS user contexts, for instance, is a configuration-specific choice.
The AT commands, which use user context ID values, <cid>, are listed below:
ATD
+CGDCONT (Chapter 13.2)
+CGQREQ (Chapter 13.3)
+CGQMIN
+CGACT
+CGDATA
Defined values
<cid> GPRS user cid value 1...2

13.2 +CGDCONT DEFINE PDP CONTEXT

Command
Set
+CGDCONT=<cid>,<PDP_type>,<APN>,
<PDP_addr>,<d_comp>,<h_comp>,
<pd1>[,...[,<pdN>]]
Read +CGDCONT?
Test +CGDCONT=?
Mandatory unless only a single subscribed context is supported. 07.60 section 10.2.1.
Specifies PDP context parameter values for a PDP context. This command is used in
conjunction with the +CGDATA command.
(Chapter 13.4)
(Chapter 13.6)
(Chapter 13.7)
Response
+CGDCONT: <cid>,<PDP_type>,
<APN>,<PDP_addr>,<data_comp>,
<head_comp>,<pd1>[,...[,pdN]]
[<CR><LF>+CGDCONT: <cid>,
<PDP_type>,<APN>,<PDP_addr>,
<data_comp>,<head_comp>,<pd1>
[,...[,pdN]]
[...]]
+CGDCONT: (1-2),"IP",,,(0,1), (0,1)
Default
1,"IP",,,0,0
77/107