Chld Call Related To Sss - Nokia 30 GSM Connectivity Terminal At Command Manual

<mode>:
0 disable
1 enable
2 query status
3 registration
4 erasure
<number>: string-type phone number of forwarding address in the format specified by
<type>
<type>: type of address octet in integer format (GSM 04.08, subclause 10.5.4.7). The
default value is 145 when the dialling string includes the international access
code character "+"; otherwise the default value is129
<subaddr>: string type subaddress of the format specified by <satype>
<satype>: type of sub-address octet in integer format (GSM 04.08, subclause 10.5.4.8).
The default value is 128.
<classx> a sum of integers each representing a class of information (the default value 7
equals all classes):
1 voice
2 data
4 fax
also all other values below 128 are reserved
<time>: 1...30 when "no reply" is enabled or queried, gives the time in seconds to wait
before a call is forwarded. The default value is 20.
<status>:
0 not active
1 active

7.12 +CHLD CALL RELATED TO SSS

Command
Execute +CHLD=<n>
Test +CHLD=?
Optional. See ETSI GSM 07.07 /2/, section 7.12. Controls call hold, multiparty and explicit
call transfer supplementary service operations as defined in GSM 02.30, section 4.5.5.1. A
short description of <n> values: 0 = release waiting or incoming call (send 'busy' signal to
network), or held calls; 1 = release active calls and accept another (waiting or held) call; 1x =
release active call x; 2 = active calls on hold and accept another (waiting or held) call; 2x =
Response
+CHLD: (0,1,1x,2,2x,3,4)
+cme error
x
45/107