Ipr Fixed Dte Rate; Icf Dte-Dce Character Framing - Nokia 30 GSM Connectivity Terminal At Command Manual

4.1.10 +IPR Fixed DTE rate

Command
Set +IPR=<rate>
Read
+IPR?
Test +IPR=?
The +IPR command sets the data rate at which the DCE will accept commands. The
specified rate takes effect immediately following the issuance of the current command line.
NOTE: The reset commands Z and &F do not change this setting.
Defined values
<rate> is the bit transmission rate per one second

4.1.11 +ICF DTE-DCE character framing

Command
Set +ICF=<format>,
<parity>
Read +ICF?
Test +ICF=?
The +ICF command is used to determine the local serial port start-stop character framing
that the Nokia 30 uses when accepting DTE commands and when transmitting information
text and a result.
NOTE: The reset commands Z and &F do not change this setting.
Defined values
<format> determines the number of bits in the data bits, the presence of a parity bit, and
the number of stop bits in the start-stop frame.
0
1
2
3
4
Response
+IPR: <rate>
+IPR:
(0,1200,2400,4800,9600,14400,192
00,28800,38400,57600,115200), ()
Response
+ICF: <format>,<parity>
+ICF: (0-6),(0-3)
auto detect
8 data, 2 stop
8 data, 1 parity, 1 stop
8 data, 1 stop
7 data, 2 stop
Default
0
Default
[0,3]
9/107