Cmgs Send Message - Nokia 30 GSM Connectivity Terminal At Command Manual

10.14

+CMGS SEND MESSAGE

Command
Execute
Text mode (+CMGF=1):
+CMGS=<da>,<toda><CR>
text is entered<ctrl-Z/ESC>
PDU mode (+CMGF=0):
+CMGS=<length><CR>
PDU is given<ctrl-Z/ESC>
Test +CMGS=?
Text mode:
The +CMGS command sends a message to the network (SMS-SUBMIT). The message
reference value <mr> is returned to the TE when a message has been delivered
successfully. Optionally (when +CSMS <service> value is 1 and the network supports it),
<scts> is returned. Values can be used to identify a message upon unsolicited delivery status
report result code.
PDU mode:
The +CMGS command sends a message from a TE to the network (SMS-SUBMIT). The
message reference value <mr> is returned to the TE when a message is successfully
delivered. Optionally (when +CSMS <service> value is 1 and the network supports it),
<ackpdu> is returned. Values can be used to identify a message upon an unsolicited delivery
status report result code.
The text/PDU entering is as specified in 07.05. If the SMSC address is not set/restored
during the current session (i.e. +CSCA? returns +CSCA: "",129), it must automatically be
read from the SIM/ME (location 1). In PDU mode, all kinds of GSM 03.40 MO TPDUs can be
sent with this command (operation equals +CMGC).
Defined values
<da> GSM 03.40 TP-Destination-Address Address-Value field in string format; the
type of address is given by <toda>
<toda> GSM 04.11 TP-Destination-Address Type-of-Address octet in integer format
129
145
<mr> GSM 03.40 TP-Message-Reference in integer format
Response
text mode (+CMGF=1) and sending
ok:
+CMGS: <mr>[,<scts>]
PDU mode (+CMGF=0) and sending
ok:
+CMGS: <mr>[,<ackpdu>]
unknown/telephony
internal/telephony
Default +cms
error
text mode: x
[,129/145]
68/107