Cds New Sms-Status-Report - Nokia 30 GSM Connectivity Terminal At Command Manual

15.4.5 +CDS New SMS-STATUS-REPORT

Format
Text mode:
+CDS: <fo>,<mr>,[<ra>],[<tora>],
<scts>,<dt>,<st>
PDU mode:
+CDS: <length><CR><LF><pdu>
See also the +CNMA command.
Defined values
<fo> First octet of GSM 03.40 SMS-STATUS-REPORT in integer format
<mr> GSM 03.40 TP-Message-Reference in integer format
<ra> GSM 03.40 TP-Recipient-Address Address-Value field in string format; type of
address given by <tora>
<tora> GSM 04.11 TP- Recipient-Address Type-of-Address octet in integer format:
129
145
<scts> GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format
<dt> GSM 03.40 TP-Discharge-Time in time-string format: "yy/MM/dd,hh:mm:ss±zz"
<st> GSM 03.40 TP-Status in integer format
<length> The length of the actual TP data unit in octets (i.e. the RP layer SMSC address
octets are not counted in the length)
<pdu> GSM 04.11 SC address followed by GSM 03.40 TPDU in hexadecimal format
Description
When +CNMI=0: routed messages are buffered into the Nokia
30 (if buffer is full, 'memory capacity exceeded' is sent to the
network)
When +CNMI=1: in the online data state, the routed messages
are rejected (e.g. 'memory capacity exceeded' is sent to the
network and when the command mode is entered, 'memory
available' is sent to network); in the command mode they are
forwarded directly to the TE
When +CNMI=2: in the online data state routed, messages are
buffered into the Nokia 30 (if the buffer is full, 'memory capacity
exceeded' is sent to the network and when the command mode
is entered, 'memory available' is sent to network); in the
command mode, they are forwarded directly to the TE
Unknown/telephony
Internal/telephony
95/107