Cdsi New Sms-Status-Report Indication - Nokia 30 GSM Connectivity Terminal At Command Manual

<mid> GSM 03.41 CBM Message Identifier in integer format
<dcs> GSM 03.38 Cell Broadcast Data Coding Scheme in integer format
<page> GSM 03.41 CBM Page Parameter bits 4-7 in integer format
<pages> GSM 03.41 CBM Page Parameter bits 0-3 in integer format
<data> GSM 03.41 CBM Content of Message in text mode responses; format:
- If <dcs> indicates that GSM 03.38 default alphabet is used:
If the TE character set is other than "HEX" (refer command +CSCS in
-
GSM 07.07): the Nokia 30 converts the GSM alphabet into the current
TE character set according to the rules of Annex A
If the TE character set is "HEX": the Nokia 30 converts each 7-bit
-
character of the GSM alphabet into two IRA character-long hexadecimal
numbers
- If <dcs> indicates that an 8-bit or a UCS2 data coding scheme is used:
the Nokia 30 converts each 8-bit octet into two IRA character-long
hexadecimal numbers
<length> The length of the actual TP data unit in octets (i.e. the RP layer SMSC address
octets are not counted in the length)
<pdu> GSM 03.41 TPDU in hexadecimal format

15.4.4 +CDSI New SMS-STATUS-REPORT indication

Format
+CDSI: <mem>,<index>
Defined values
<mem> memory to which the received SMs are preferred to be stored:
"SM"
<index> integer type, the location of the message in the defined memory
Description
When +CNMI=0: indications are buffered into the Nokia 30
When +CNMI=1: in the online data state, indications are discarded; in
command mode they are forwarded directly to the TE
When +CNMI=2: in the online data state, indications are buffered into the
Nokia 30; in the command mode forwarded directly to the TE
SIM message storage
94/107