Introduction - Nokia 30 GSM Connectivity Terminal At Command Manual

1.

INTRODUCTION

This document describes the AT commands that can be used to operate the Nokia 30 GSM
Connectivity Terminal.
All the mandatory and optional ITU-T V.25ter /1/, ETS GSM 07.07 /2/, and ETS GSM 07.05
/3/ commands that are applicable to the Nokia 30 are included in the Nokia 30 command set.
The 'de facto' commands that are widely used with modems are also supported. Note that
the ITU-T V.25ter is a combination of three TIA standards (TIA-602, TIA-615, IS-131).
The Nokia 30 can be used as an adapter for a Group 3 facsimile terminal that supports
facsimile Service Classes 1, 2 and 2.0. The supported facsimile AT commands are listed
according to the standards in which they are specified: Service Class 1 TIA-578-A /4/,
Service Class 2.0 TIA-592 /5/ and Service Class 2 TIA SP-2388 /6/. TIA SP-2388 is a draft of
a future standard, but here it is referred to as a public standard.
The Nokia 30 can be operated using a compatible computer or other devices with a 9-pin
RS232 connector. AT commands are also available on 3 V level on the M2M System
Connector of the Nokia 30 terminal.
For more detailed information about the Nokia 30 GSM Connectivity Terminal, other Nokia
M2M products and application development, please visit our website at
http://www.forum.nokia.com or http://www.americas.forum.nokia.com and M2M links.
2/107