Figure 5-42 Common Memory Area Setup Window For Other Participating Nodes - Hitachi S10mini User Manual

5 USER GUIDE
(2) Setting the CPU or LPU memory area for the other nodes
Perform reception setup for the other nodes with the setup tool named [FL.NET For
Windows®].
The data received from various nodes are transferred to the area allocated in the CPU or LPU
memory. If the CPU or LPU memory area word count differs from the common memory size
setting (link parameter area word count), the FL.NET module transfers data from the common
memory. The amount of this data transfer is determined from the number of words specified
by the CPU or LPU memory area word count setting. To acquire the entire data received by
the common memory, ensure that the size setting made is equal to the common memory setting
(link parameter setting) for the other nodes.
Enter the starting
PI/O address and
size for the area 1.
Enter the starting
PI/O address and
size for the area 2.

Figure 5-42 Common Memory Area Setup Window for Other Participating Nodes

Indicates the CPU or LPU
memory allocation area for
the local node number.
CPU or LPU memory area setup for
the other participating nodes
5-46