Hitachi S10mini User Manual page 16

Do not connect an FL-net protocol Ver. 1.00 device to a Ver. 2.00 device. The FL-net protocol
Ver. 2.00 device has a function that prevents participation in the data link when an FL-net protocol
Ver. 100 device is detected on the network. Accordingly, the Ver. 1.00 device and Ver. 2.00 device
cannot configure a data link.
To determine whether device versions are compatible, see below.
Other device
Ver. 1.00 device
Ver. 2.00 device
√: Connectable, nc: Not connectable
Ver. 1.00: FL-net protocol version of the device manufactured on the standard of the FA Control
Network [FL-net (OPCN-2)] - Protocol Specification JEM 1479 2000-edition issued by
Japan Electrical Manufacturers' Association (JEMA)
Ver. 2.00: FL-net protocol version of the device manufactured on the standard of the FA Control
Network [FL-net (OPCN-2)] - Protocol Specification JEM 1479 2002-revision issued by
Japan Electrical Manufacturers' Association (JEMA)
The existing parameter setting software (FL.NET system) shown in the following table can be used
for LQE500 and LQE502 regardless of the FL-net protocol version.
FL.NET system for S10mini
FL.NET system for S10V
Self-device
Ver. 1.00 device
Name
√
nc
Model
S-7890-30J For LQE500 and LQE502
S-7895-30J For LQE500 and LQE502
ii
Ver. 2.00 device
nc
√
Remarks