5 USER GUIDE
5.6.11 Entering operation function (S10mini only)
Function: Enter the operation function for the FL.NET module.
For using this function, it is a prerequisite that the PCs is connected to the PC by cable.
Operation: The procedure is shown below.
(1) Select [Enter operation function] from the [Tool] menu of the [FL.NET] window.
(2) The [Enter operation function] window is displayed.
(3) Click the number to be entered, then click the
specified number, click the
(4) Clicking the
(5) Select either "Operation function for main module" or "Operation function for sub module" and
click the
OK
Delete
Setup
button displays the [Select operation function] window.
button.
Setup
button. To delete the setup of the
button.
5-148