Figure 5-55 The [Communication Type] Window; Figure 5-56 File Selection Dialog Box - Hitachi S10mini User Manual

(2) By choosing [Change connection] from the [Tool] menu, display the [Connection type]
window (Figure 5-55) on-screen. When the [Connection type] window appears, specify the
desired destination of connection and click the
connections" for details on the communication type). If you need not change the current
connection destination setting, click the

Figure 5-55 The [Communication type] Window

S10V FL.NET system startup procedure to start it up in offline mode
The procedure described below enables you to create a setup information file for the FL.NET and
edit it, all in offline mode, even if the actual target machine is not present in your user system.
To send the setup information file prepared this way to the target machine, first put the FL.NET
system into online mode and then send it by choosing [Main] – [Send setups], or [Sub] – [Send
setups], from the [Module] menu.
(1) Take the same action as specified in Step (1) under " S10V FL.NET system startup
procedure to start it up in online mode." The FL.NET system's main window will then
appear.
(2) Choose [Offline] from the [Module] menu. The file selection dialog box as shown below
will then appear. Choose the desired FL.NET setup information file you want to edit in
offline mode.

Figure 5-56 File Selection Dialog Box

5-131
OK button (see "5.5.4 Changing
Cancel button instead.
5 USER GUIDE