Figure 8-72 Inserting The Utp Cable Into The Connector; Figure 8-73 Assembling The Utp Cable Connector - Hitachi S10mini User Manual

③ Inserting the UTP cable into the connector
Attach the cable to the connector while retaining the proper arrangement of wires. View
the front, top, and bottom surfaces of the cable to check whether the cable is inserted all the
way into the connector.

Figure 8-72 Inserting the UTP Cable into the Connector

④ Assembling the UTP cable connector
Verify that the cable is properly inserted into the connector, and then pressure-connect the
cable to the connector with a dedicated tool. After completion of pressure-connection, be
sure to verify the connection with a dedicated tester.
UTP connector
⑤ Applicable cable
For the cable recommended for use with the FL.NET module, see "8.5.1 Ethernet
component list."
(2) Hub
(a) Applicable hub
For the hub recommended for use with the FL.NET module, see "8.5.1 Ethernet
component list."
①

Figure 8-73 Assembling the UTP Cable Connector

Dedicated tool for UTP connector
① Insert the connector into position.
② Manipulate the lever on the tool to
pressure-connect the cable to the
connector.
②
8-67
8 APPENDIXES