3 FL.NET MODULE INSTALLATION
3.1 Mount Base
The FL.NET module can be mounted in the mount bases shown in Table 3-1.
Table 3-1 Mount Bases Applicable to the FL.NET Module
Series
2-slot mount base
S10mini
4-slot mount base
8-slot mount base
4-slot mount base
S10V
8-slot mount base
3.2 Mounting the Module
Mount the option module in an option slots (slot number 0 through 7) on the mount base as shown
below.
S10mini Series
Mount the option module in option slots that is located to the immediate right
of the CPU module. Be sure that no I/O module is mounted between this
option module and CPU module. Also, ensure that there is no unoccupied
slot between option modules.
This module (LQE500, LQE502) can be mounted together with the LQE000
FL.NET module, which is specially designed for use with the S10mini.
S10V Series
There are no specific rules about the mounting position or unoccupied slots.
The LQE000 FL.NET module cannot be used as it is specially designed for
use with the S10mini.
Name
HSC-1020
HSC-1040
HSC-1080
HSC-1540
HSC-1580
Mount base
Power supply
CPU or LPU
module
module
Figure 3-1 Mounting the Option Module
Model
Power supply + CPU + 2 slots (option, for I/O)
Power supply + CPU + 4 slots (option, for I/O)
Power supply + CPU + 8 slots (option, for I/O)
Power supply + LPU + 4 slots (option, for I/O)
Power supply + LPU + 8 slots (option, for I/O)
Optional slots
0
1 2
3
4
5
6
7
Option module
3-2
Specification