Hitachi S10mini User Manual page 194

5 USER GUIDE
5.6.6 Node setting list
Function: Display the PCs allocation and current values of all nodes.
For using this function, it is a prerequisite that the PCs is connected to the PC by cable.
Operation: The procedure is shown below.
(1) Click the Node setting list
(2) The [Node setting list] window is displayed.
(3) Click the Start monitoring
Click the Close
5.6.7 RAS information
Function: Display the RAS information.
For using this function, it is a prerequisite that the PCs is connected to the PC by cable.
Operation: The procedure is shown below.
(1) Select [Main] or [Sub] from the [Module] menu of the [FL.NET] window or [[S10V] FL.NET]
window.
(2) Select the [RAS information] menu.
(3) The [RAS information] window is displayed.
button on the [Network status] window.
button to monitor the current values.
button to exit the [Node setting list] window.
5-142