Understanding Copper Modules; Models And Parameters; Sfp/Esfp Optical Module - Huawei AR500 Series Hardware Description

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
Using a Command
If an optical module is installed in a running router, you can run the display transceiver
command to view parameters of the optical module, including the center wavelength,
transmission distance, fiber types supported, receive optical power, and transmit optical
power.

7.3 Understanding Copper Modules

Unlike optical modules, copper modules do not perform electrical-optical conversion. When
two optical interfaces have copper modules installed, the interfaces can be connected using a
copper cable. Currently, Huawei offers only GE copper modules with RJ45 interfaces. GE
copper modules work with Category 5 network cables, comply with 1000BASE-T (IEEE
802.3ab), and support a maximum transmission distance of 100 m.

7.4 Models and Parameters

NOTE
l Figures of optical modules provided in this document are only for reference and may be different
l All the optical modules described in this document have been certified by Huawei.

7.4.1 SFP/eSFP Optical Module

Appearance
Figure 7-3
Issue 10 (2019-03-06)
from the actually delivered optical modules.
shows the appearance of an SFP/eSFP optical module.
Copyright © Huawei Technologies Co., Ltd.
7 Pluggable Modules for Interfaces
743