8As Cable - Huawei AR500 Series Hardware Description

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
NOTE
l The TXD and RXD signals are defined based on signal stream direction on the industrial switching
l A console cable does not have an RTS, CTS, DSR, or DTR signal wire, and therefore does not
l Pins not listed in the table are not connected.
Connection
A console cable is connected as follows:
l
l
Ordering Information
Each industrial switching router is configured with a console cable, which is delivered in the
installation accessory package.
Table 6-103
Table 6-103 Console cable ordering information
Part Number
04040838

6.19 8AS Cable

Description
An 8AS interface card can be used in four scenarios, where different cables are required.
Table 6-104
Table 6-104 Types and application scenarios of 8AS cables
Cable Type
Straight-through cable
Issue 10 (2019-03-06)
router, and the corresponding pins must be connected to the pins of RXD and TXD on the remote
device.
support hardware-based flow control.
The RJ45 connector is connected to the console interface of the industrial switching
router.
The DB9 connector is connected to a maintenance terminal, generally a computer.
provides the console cable ordering information.
describes the scenarios and applicable cables.
Copyright © Huawei Technologies Co., Ltd.
Description
Single Cable, Serial Port
Cable, 3m, D9F,
CC2P0.32PWG1U, MP8-
VI, S3026V
Application Scenario
Financial dumb terminal
6 Cables
Remarks
Standard configuration
Description
The pin assignments at both
ends of the cable are the same.
726