Huawei AR500 Series Hardware Description page 611

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
Number
3
4
5
6
7
8
9
10
11 and 12
Issue 10 (2019-03-06)
Name
Management FE
interface
AC input power
socket
Equipotential
ground terminal
LAN interfaces:
eight input GE
interfaces
LAN interfaces:
eight output GE
interfaces (PoE
capable)
RUN/ALM
PoE
12 V
GE electrical
interface indicators
Copyright © Huawei Technologies Co., Ltd.
Description
Reserved hardware interfaces.
Connects the power module to an external
power supply system using a power cable with
a 3-pin plug.
Uses a 6.8 Ground Cable
router to protect the router from lightning and
interference.
Uses an 6.6 Ethernet Cable
Ethernet interface of the router.
Connect to other devices for PoE.
NOTE
An Ethernet interface that does not support PoE can
be converted into a PoE-enabled GE interface
through a 180 W PoE midspan. To implement PoE,
connect the output and input GE interfaces to the
corresponding interfaces, for example, connecting the
input GE interface to the GE0 interface on the left
and the output GE interface to the GE0 interface on
the right.
l Off: The system software is not running or
is resetting.
l Slow blinking green: The system is running
properly.
l Fast blinking green: The system is powering
on or restarting.
Steady red: A system fault has occurred and
requires manual intervention.
l Steady on: The midspan is providing 48 V
power supply normally.
l Off: The midspan does not provide 48 V
power supply normally or is not connected
to any power source.
l Steady on: The power input socket of the
midspan is receiving power normally from a
power source.
l Off: The midspan cannot be powered by the
power source or is not connected to any
power source.
l Steady green: The power supply level for
PDs is 0 to 3.
l Off: The interface is not supplying power to
PDs.
4 Power Supplies
to reliably ground a
to connect to the
600