Huawei AR500 Series Hardware Description page 534

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
Table 3-423 GE electrical interface attributes
Attribute
Connector type
Standards compliance
Interface attribute
Frame format
Network protocol
Cable type
GE optical interface
A GE optical interface (100/1000 Mbit/s auto-sensing) transmits and receives service traffic at
100 Mbit/s or 1000 Mbit/s. It uses optical fibers together with a GE or FE optical module.
Table 3-424
Table 3-424 GE optical interface attributes
Attribute
Connector type
Interface attribute
Standards compliance
Frame format
Network protocol
10GE optical interface
A 10GE optical interface supports GE/10GE auto-sensing and can send and receive data at 1
Gbit/s or 10 Gbit/s.
Issue 10 (2019-03-06)
lists GE optical interface attributes.
Table 3-425 describes the attributes of a 10GE optical interface.
Copyright © Huawei Technologies Co., Ltd.
Description
RJ45
IEEE802.3, IEEE802.3u, IEEE802.3ab
MDI/MDIX
NOTE
l MDI stands for medium dependent interface,
an Ethernet interface connection mode.
Ethernet interfaces of most network interface
cards (NICs) are MDI interfaces.
l MDIX stands for medium dependent
interface crossover, a version of MDI. MDIX
interfaces are usually used on hubs or LAN
switches.
Ethernet_II, Ethernet_SAP, Ethernet_SNAP
IP
6.6 Ethernet Cable
Description
LC/PC
Depends on the optical module used
IEEE802.3ab
Ethernet_II, Ethernet_SAP, Ethernet_SNAP
IP
3 Chassis
523