Huawei AR500 Series Hardware Description page 476

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
Num
ber
6
7
Interface Description
Console Interface
The console interface can connect to an operation terminal for onsite configuration.
3-363
Table 3-363 Console interface attributes
Attribute
Connector type
Standards compliance
Working mode
Data equipment type
Cable type
FE Electrical Interface
An FE electrical interface receives and transmits Ethernet services at 10 Mbit/s or 100 Mbit/s.
Table 3-364
Issue 10 (2019-03-06)
Indicato Color
r/Button
3G/2G Green
ZigBee/ Green
sub-GHz
lists console interface attributes.
lists FE electrical interface attributes.
Copyright © Huawei Technologies Co., Ltd.
Description
Steady on: The 3G/2G link has been connected and is
active (dialup succeeded).
Fast blinking: The 3G/2G link is transmitting and
receiving data.
Off: The 3G/2G link is not connected and is inactive.
Steady on: The ZigBee network has been established
successfully or the sub-GHz antenna interface has
successfully connected to the peer end.
Fast blinking: The ZigBee/sub-GHz antenna is
transmitting and receiving data.
Off:
l The ZigBee/sub-GHz function is not configured or
no ZigBee/sub-GHz antenna is connected to the
antenna interface.
l The ZigBee/sub-GHz module does not work
normally.
l The ZigBee network fails to be established or the
sub-GHz antenna interface fails to connect to the
peer end.
Description
RJ45
RS232
Full-duplex Universal Asynchronous
Receiver/Transmitter (UART)
Data circuit-terminating equipment (DCE)
6.18 Console Cable
3 Chassis
Table
465