Huawei AR500 Series Hardware Description page 312

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
LTE antenna interface
LTE antenna interfaces of a router include a MAIN interface (for the primary antenna) and a
DIV interface (for the secondary antenna). The primary and secondary antennas work
together. The primary antenna transmits and receives LTE signals, and the secondary antenna
helps improve the quality of received LTE signals.
antenna interface.
Table 3-196 LTE antenna interface attributes
Attribute
Connector type
Standards
compliance and
frequency bands
supported
Rate
Network protocols
Cable type
Issue 10 (2019-03-06)
Description
SMA-K (screw threads outside and a hole inside)
l FDD LTE: bands 1/3
l TDD LTE: bands 38/39/40/41
l TD-SCDMA: bands 34/39
l UMTS: band 1
l EVDO/CDMA1x: 800 MHz
l GSM: 850/900/1800/1900 (MHz)
l Frequency Division Duplexing (FDD) LTE: uplink rate of 50
Mbit/s and downlink rate of 100 Mbit/s
l Time Division Duplexing (TDD) LTE: uplink rate of 18 Mbit/s
and downlink rate of 61 Mbit/s
l Time Division-Synchronous Code Division Multiple Access
(TD-SCDMA): uplink rate of 2.2 Mbit/s and downlink rate of
4.2 Mbit/s
l High Speed Packet Access Plus (HSPA+): uplink rate of 5.76
Mbit/s and downlink rate of 21.6 Mbit/s
l Wideband Code Division Multiple Access packet switched
(WCDMA PS): uplink rate of 384 kbit/s and downlink rate of
384 kbit/s
l WCDMA circuit switched (CS): uplink rate of 64 kbit/s and
downlink rate of 64 kbit/s
l Global System for Mobile Communications Circuit Switched
Data (GSM CSD): 14.4 kbit/s
l Enhanced Data Rates for GSM Evolution (EDGE): uplink rate of
118 kbit/s and downlink rate of 236.8 kbit/s
l General Packet Radio Service (GPRS): uplink rate of 85.6 kbit/s
and downlink rate of 85.6 kbit/s
LTE, WCDMA, GSM
6.3.2 LTE Whip Antenna
6.3.3 LTE Indoor Remote Antenna
6.3.4 Outdoor LTE Antenna
Copyright © Huawei Technologies Co., Ltd.
Table 3-196 lists attributes of an LTE
3 Chassis
301