Page 1 Huawei AR500&AR510&AR531&AR550&1500&AR2500 Industrial Switch Routers Hardware Description Issue Date 2019-03-06 HUAWEI TECHNOLOGIES CO., LTD.
Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
Page 3: About This Document
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 4 Issue 10 (2019-03-06) This issue has the following updates: The following content is modified: 3.7.3 AR2504E-H The following content is added: 6.2.9 5-Pin M12 DC Power Terminal Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 5 This issue has the following updates: The following content is added: 4 Power Supplies 4.2 Types of Power Supplies 4.3 24 W Integrated Power Adapter 4.4 24 W Integrated Power Adapter with an Adapter Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 6 The following content is added: AR502EG-La AR502EG-L-PD AR503GW-Lo AR515CGW-L Issue 02 (2017-08-30) This issue has the following updates: The following content is modified: 3.5.1 AR550-8FE-D-H Issue 01 (2017-08-04) This issue is the first official release. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 7: Table Of Contents
2.20 Components Available in V200R005C30........................70 3 Chassis............................72 3.1 Naming Conventions..............................72 3.2 AR500 Series................................76 3.2.1 AR502CG-L................................76 3.2.2 AR502EG-L................................84 3.2.3 AR502EG-La................................94 3.2.4 AR502EG-Lj................................103 3.2.5 AR502EG-L-PD..............................112 3.2.6 AR502EGW-L................................. 116 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 8 3.3.8 AR513W-V1................................408 3.3.9 AR515GW-LM9-D..............................417 3.3.10 AR515CGW-L...............................425 3.4 AR530 Series................................435 3.4.1 AR531-2C-H................................435 3.4.2 AR531-F2C-H................................. 444 3.4.3 AR531GPe-U-H..............................452 3.4.4 AR531GR-U-H................................461 3.4.5 AR531G-U-D-H..............................471 3.5 AR550 Series................................480 3.5.1 AR550-8FE-D-H..............................480 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 9 5.3.2 1LTE-L-H (FDD/HSPA+ Industrial Data Card)......................632 6 Cables............................639 6.1 Power Cables................................640 6.1.1 4-Pin Power Cable (Without Terminals)......................... 640 6.1.2 4-Pin Power Cable (with Terminals)........................641 6.1.3 eSATA Power and Signal Cable..........................642 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. viii...
Page 10 6.3.20 GPS/BDS+LTE Remote Diversity Antenna (Circular Shape)................698 6.3.21 DTMB Remote Antenna............................698 6.3.22 sub-GHz Antenna..............................700 6.4 Serial Cable (CON/RS232)............................702 6.5 6-pin Serial Cable............................... 703 6.6 Ethernet Cable................................705 6.7 RS232 Cable................................707 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 11 6.18 Console Cable................................725 6.19 8AS Cable.................................726 7 Pluggable Modules for Interfaces..................735 7.1 Important Notes About Using Optical Modules Certified for Huawei Routers............735 7.1.1 How to Identify Huawei-Certified Optical Modules....................735 7.1.2 Risks of Using Non-Huawei-Certified Optical Modules..................736 7.2 Understanding Optical Modules..........................
Page 12: Using The Hardware Query Tool
You can search router products or modules by part number, product model, or module type. Figure 1-1 Web page of the Hardware Query Tool Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 13: Version Requirements For Components
2.14 Components Available in V200R006C10 2.15 Components Available in V200R005C80 2.16 Components Available in V200R005C70 2.17 Components Available in V200R005C60 2.18 Components Available in V200R005C32 2.19 Components Available in V200R005C31 2.20 Components Available in V200R005C30 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 14: Components Available In V200R010C10
Provides fixed interfaces and does not support interface expansion. It is powered by an external DC power supply. The fixed interfaces include RS485/RS422, RS232, DI/DO, Wi-Fi antenna, LTE antenna interfaces, and two GE LAN interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 15: Ar502Egrb-L
DC power supply. The fixed interfaces include one SATA interface, one GE WAN interface, and one RS232 interface. Additionally, the router has FDD LTE, Wi-Fi (802.11a/b/g/n AP), and GPS antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 16 It is powered by an external DC power supply. The fixed interfaces include four GE LAN interfaces. Additionally, the router has FDD LTE, Wi-Fi (802.11b/g/n/ac AP), and GPS/BDS antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 17: Ar503Gw-Lo
It is powered by an external DC power supply. The fixed interfaces include one GE WAN interface, one VDSL2 WAN interface, four GE LAN (PoE+) interfaces, and LTE antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 18: Ar509Cg-Lt
It is powered by an external DC power supply. The fixed interfaces include four GE LAN interfaces, Wi-Fi antenna interfaces, and LTE antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 19: Ar511Gw-Lm7
The fixed interfaces include one eSATA interface, one audio interface, two HDMI interfaces, one VGA interface, one DI/DO interface, one RS485 interface, and two GE WAN interfaces. Additionally, the router has Wi-Fi (802.11a/b/g/n AP) antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 20 It is powered by an external single-phase or three-phase AC power supply. The fixed interfaces include two FE combo interfaces, six FE optical interfaces, two GE optical interfaces, two RS485 interfaces, and two DI interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 21 DC power supply and supports the PoE function. The fixed interfaces include six GE electrical LAN interfaces, two GE combo LAN interfaces, two 2.5GE optical LAN interfaces, DI/DO interfaces, an RS485 interface, and a PoE power socket. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 22 8 FE electrical interfaces, and 4 GE combo interfaces. AR1500 AR1504-8S16T Provides fixed interfaces and supports two DC power modules. The fixed interfaces include 8 FE optical interfaces, 16 FE electrical interfaces, and 4 GE combo interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 23: Components Available In V200R010C00
Provides fixed interfaces and does not support interface expansion. It is powered by an external DC power supply. The fixed interfaces include LTE antenna, RS485/ RS422, RS232, DI/DO interfaces, and two GE LAN interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 24 It is powered by an external DC power supply. The fixed interfaces include RS485/RS422, RS232, DI/DO, LTE antenna, ZigBee antenna (2.4 GHz) interfaces, and two GE LAN interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 25 It is powered by an external DC power supply. The fixed interfaces include four GE LAN interfaces. Additionally, the router has two FDD LTE, TDD LTE, Wi-Fi (802.11b/g/n/ac AP), and GPS/BDS antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 26 It is powered by an external DC power supply. The fixed interfaces include GE LAN interfaces. Additionally, the router has two FDD LTE, TDD LTE, Wi-Fi (802.11b/g/n/ac AP), and GPS antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 27 Provides fixed interfaces, supports LTE uplink connection, and does not support interface expansion. It is powered by an external DC power supply. The fixed interfaces include four GE LAN interfaces and LTE antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 28 The fixed interfaces include one GE WAN interface, one audio interface, and two video interfaces. Additionally, the router has LTE FDD, Wi-Fi (802.11a/b/g/n AP), GPS, and Digital Television Terrestrial Multimedia Broadcasting (DTMB) antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 29 It is powered by an external DC power supply. The fixed interfaces include six FE LAN interfaces, SATA interface, VGA interface, and RS485/RS422 interface. Additionally, the router has FDD LTE, Wi-Fi (802.11b/g/n/ac AP), and GPS/BDS antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 30 DC power supply and supports the PoE function. The fixed interfaces include six GE electrical LAN interfaces, two GE combo WAN interfaces, two 2.5GE optical WAN interfaces, DI/DO interfaces, an RS485 interface, and a PoE power socket. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 31 The fixed interfaces include four GE electrical interfaces and four GE combo interfaces. AR1500 AR1504-24S Provides fixed interfaces and supports two DC power modules. The fixed interfaces include 24 FE optical interfaces and 4 GE combo interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 32: Components Available In V200R009C00
1LTE-L-H FDD/HSPA+ industrial data card 2.3 Components Available in V200R009C00 NOTE The components marked are the new components added to V200R009C00. Chassis Table 2-5 describes the chassis models available in V200R009C00. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 33 RF access, and does not support interface expansion. It is powered by an external DC power supply. The fixed interfaces include RS485/RS422, RS232, DI/DO, LTE antenna, RF antenna (433 MHz) interfaces, and two GE LAN interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 34 DC power supply. The fixed interfaces include one SATA interface, one GE WAN interface, and one RS232 interface. Additionally, the router has FDD LTE, Wi-Fi (802.11a/b/g/n AP), and GPS/BDS antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 35 It is powered by an external DC power supply. The fixed interfaces include GE LAN interfaces. Additionally, the router has two FDD LTE, TDD LTE, Wi-Fi (802.11b/g/n/ac AP), and GPS/BDS antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 36 DC power supply. The fixed interfaces include one GE WAN interface, one VDSL2 WAN interface, and four GE LAN (PoE+) interfaces. Additionally, the router has Wi-Fi (802.11b/g/n/ac AP), and LTE antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 37 It is powered by an external DC power supply. The fixed interfaces include one SATA interface and one GE WAN interface. Additionally, the router has FDD LTE, Wi-Fi (802.11a/b/g/n AP), and GPS antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 38 The fixed interfaces include four GE WAN interfaces, four GE LAN interfaces, as well as SATA, HDMI, VGA, RS485/RS422, and DB37 interfaces. Additionally, the router has FDD LTE, Wi-Fi (802.11b/g/n/ac AP), and GPS antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 39 DC power supply and supports the PoE function. The fixed interfaces include six GE electrical LAN interfaces, two GE combo WAN interfaces, two 2.5GE optical WAN interfaces, DI/DO interfaces, an RS485 interface, and a PoE power socket. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 40 The fixed interfaces include four GE electrical interfaces and four GE combo interfaces. AR1500 Provides fixed interfaces and supports two DC AR1504-24S power modules. The fixed interfaces include 24 FE optical interfaces and 4 GE combo interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 41: Components Available In V200R008C50
1LTE-L-H FDD/HSPA+ industrial data card 2.4 Components Available in V200R008C50 NOTE The components marked are the new components added to V200R008C50. Chassis Table 2-7 describes the chassis models available in V200R008C50. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 42 DC power supply. The fixed interfaces include one SATA interface, one GE WAN interface, and one RS232 interface. Additionally, the router has FDD LTE, Wi-Fi (802.11a/b/g/n AP), and GPS antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 43 PoE, and does not support interface expansion. It is powered by an external DC power supply. The fixed interfaces include four GE LAN interfaces. Additionally, the router has Wi-Fi (802.11b/g/n/ac AP) antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 44 It is powered by an external DC power supply. The fixed interfaces include four GE LAN interfaces. Additionally, the router has LTE antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 45 The fixed interfaces include one eSATA interface, one audio interface, two HDMI interfaces, one VGA interface, one DI/DO interface, one RS485 interface, and two GE WAN interfaces. Additionally, the router has Wi-Fi (802.11a/b/g/n AP) antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 46 AC power supply. The fixed interfaces include six FE electrical interfaces, two GE optical interfaces, two RS485 interfaces, two DI interfaces, a power line communication (PLC) interface, and 3G antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 47 Table 2-8 describes the cards available in V200R008C50. Table 2-8 Cards available in V200R008C50 Card Type Card Name Description Ethernet LAN 8ES2G 8-port 1000BASE (RJ45) L2 Ethernet interface interface card card (industry) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 48: Components Available In V200R008C30
Provides fixed interfaces and does not support AR502CG-L interface expansion. It is powered by an external DC power supply device. The fixed interfaces include CON/RS232, DI/DO, LTE antenna interface, and two GE LAN interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 49 PoE functions, and does not support interface expansion. It is powered by an external DC power supply. The fixed interfaces include four GE LAN interfaces. The router can act as an 802.11b/g/n/ac Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 50 It is powered by an external DC power supply. The fixed interfaces include one GPS interface, one SATA interface, one GE WAN interface. Besides, the router has antenna interfaces and supports FDD LTE and 802.11a/b/g/n AP. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 51 The fixed interfaces include four GE WAN interfaces, four GE LAN interfaces, as well as SATA, HDMI, VGA, GPS, RS485/RS422, and DB37 interfaces. Besides, the router has antenna interfaces and supports FDD LTE and 802.11b/g/n/ac AP. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 52 AR550C-4GE interface expansion. It is powered by an external DC power supply device. The fixed interfaces include four GE electrical LAN interfaces, two 2.5GE optical WAN interfaces, and a DI/DO interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 53: Components Available In V200R008C20
FDD/HSPA+ industrial data card 2.6 Components Available in V200R008C20 NOTE The components marked * are the new components added to V200R008C20. Chassis Table 2-11 describes the chassis models available in V200R008C20. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 54 It is powered by an external DC power supply. The fixed interfaces include two FDD/TDD LTE antenna interfaces, four GE LAN interfaces, and one GPS/BDS interface. The router can act as an 802.11b/g/n/ac AP. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 55 It is powered by an external DC power supply. The fixed interfaces include one GPS interface, one SATA interface, one GE WAN interface. Besides, the router has antenna interfaces and supports FDD LTE and 802.11a/b/g/n AP. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 56 The fixed interfaces include four GE WAN interfaces, four GE LAN interfaces, as well as SATA, HDMI, VGA, GPS, RS485/RS422, and DB37 interfaces. Besides, the router has antenna interfaces and supports FDD LTE and 802.11b/g/n/ac AP. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 57 AC/DC power modules. It has two WSIC slots, in which various interface cards can be installed to increase the number of interfaces. The fixed interfaces include four GE electrical interfaces, four GE combo interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 58: Components Available In V200R008C00
FDD/HSPA+ industrial data card 1LTE-L-H 2.7 Components Available in V200R008C00 NOTE The components marked * are the new components added to V200R008C00. Chassis Table 2-13 describes the chassis models available in V200R008C00. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 59: Components Available In V200R007C02
8-Port Async Serial Port Interface Card card 2.8 Components Available in V200R007C02 NOTE The components marked are the new components added to V200R007C02. Chassis Table 2-15 describes the chassis models available in V200R007C02. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 60 The fixed interfaces include one GPS interface, two GE WAN interfaces, one audio interface, and two video interfaces. Besides, the router has antenna interfaces and supports FDD LTE and 802.11a/b/g/n (acting as an AP). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 61: Components Available In V200R007C01
GE WAN interfaces, one audio interface, and two video interfaces. Besides, the router has antenna interfaces and supports FDD/TDD LTE and 802.11a/b/g/n (acting as an AP). 2.9 Components Available in V200R007C01 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 62 The fixed interfaces include one GPS interface, two GE WAN interfaces, one audio interface, and two video interfaces. Besides, the router has antenna interfaces and supports FDD LTE and 802.11a/b/g/n (acting as an AP). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 63 The fixed interfaces include one GPS interface, two GE WAN interfaces, one audio interface, and two video interfaces. Besides, the router has antenna interfaces and supports FDD/TDD LTE and 802.11a/b/g/n (acting as an AP). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 64: Components Available In V200R007C00
It is powered by an external DC power source. The fixed interfaces include one GE WAN interface, one VDSL2 WAN interface, four GE LAN (PoE+) interfaces, and LTE antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 65 The fixed interfaces include one GPS interface, one GE WAN interface, one audio interface, and two video interfaces. Besides, the router has antenna interfaces and supports FDD LTE, 802.11a/b/g/n AP, and DTMB. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 66 It is powered by an external single-phase or three-phase AC power supply device. The fixed interfaces include two FE combo interfaces, six FE electrical interfaces, two GE optical interfaces, two RS485 interfaces, and two DI interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 67: Components Available In V200R006C17
It is powered by an external DC power supply. The fixed interfaces include one GE WAN interface, one VDSL2 WAN interface, four GE LAN (PoE+) interfaces, and LTE antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 68 The fixed interfaces include one GPS interface, one SATA interface, and one GE WAN interface. Besides, the router has antenna interfaces and supports FDD LTE and 802.11a/b/g/n (acting as an AP). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 69: Components Available In V200R006C16
FDD/TDD LTE and 802.11a/b/g/n (acting as an AP). 2.12 Components Available in V200R006C16 NOTE The components marked are updated in V200R006C16. Chassis Table 2-19 describes the chassis models available in V200R006C16. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 70 The fixed interfaces include one GPS interface, two GE WAN interfaces, one audio interface, and two video interfaces. Besides, the router has antenna interfaces and supports FDD LTE and 802.11a/b/g/n (acting as an AP). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 71: Components Available In V200R006C15
GE WAN interfaces, one audio interface, and two video interfaces. Besides, the router has antenna interfaces and supports FDD/TDD LTE and 802.11a/b/g/n (acting as an AP). 2.13 Components Available in V200R006C15 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 72 The fixed interfaces include one GPS interface, two GE WAN interfaces, one audio interface, and two video interfaces. Besides, the router has antenna interfaces and supports FDD LTE and 802.11a/b/g/n (acting as an AP). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 73: Components Available In V200R006C10
GE WAN interfaces, one audio interface, and two video interfaces. Besides, the router has antenna interfaces and supports FDD/TDD LTE and 802.11a/b/g/n (acting as an AP). 2.14 Components Available in V200R006C10 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 74 GE WAN interface, one audio interface, and two video interfaces. Besides, the router has antenna interfaces and supports FDD LTE, 802.11a/b/g/n (acting as an AP), and Digital Television Terrestrial Multimedia Broadcasting (DTMB). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 75: Components Available In V200R005C80
It is powered by an external single-phase or three-phase AC power supply device. The fixed interfaces include two FE combo interfaces, six FE electrical interfaces, two GE optical interfaces, two RS485 interfaces, and two DI interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 76: Ar531Gr-U-H
V200R005C80. Table 2-23 Power modules available in V200R005C80 Power Module Power Module Description Type Model AC power PAC-60WB 60 W AC power module module 25 W open frame power supply OPTN25-12A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 77: Components Available In V200R005C70
AC power supply device. The fixed interfaces include six FE electrical interfaces, two GE optical interfaces, two RS485 interfaces, two DI interfaces, 3G and ZigBee/sub- GHz antenna interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 78: Components Available In V200R005C60
It is powered by an external single-phase or three-phase AC power supply device. The fixed interfaces include two FE combo interfaces, six FE optical interfaces, two GE optical interfaces, two RS485 interfaces, and two DI interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 79: Components Available In V200R005C32
DI interfaces, and 3G antenna interfaces. 2.18 Components Available in V200R005C32 NOTE The components marked are the new components added to V200R005C32. Chassis Table 2-26 describes the chassis models available in V200R005C32. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 80: Components Available In V200R005C31
VGA interface, one DI/DO interface, one RS485 interface, and two GE WAN interfaces. Besides, the router has antenna interfaces and can function as an 802.11a/b/g/n AP. 2.19 Components Available in V200R005C31 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 81: Components Available In V200R005C30
FDD LTE and 802.11a/b/g/n (acting as an AP). 2.20 Components Available in V200R005C30 NOTE The components marked are the new components added to V200R005C30. Chassis Table 2-28 describes the chassis model available in V200R005C30. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 82 The fixed interfaces include one GPS interface, two GE WAN interfaces, one audio interface, and two video interfaces. Besides, the router has antenna interfaces and supports FDD LTE and 802.11a/b/g/n (acting as an AP). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 83: Chassis
3 Chassis Hardware Description Chassis About This Chapter Huawei AR routers are available in AR500, AR510, AR530, AR550, AR1500, and AR2500 series. Select the router models that suit your network requirements. 3.1 Naming Conventions 3.2 AR500 Series 3.3 AR510 Series 3.4 AR530 Series...
Page 84 E: enhanced model developed based on a basic model (enhanced interface or feature performance). l DG: support for dual wireless uplinks. l W: support for Wi-Fi access. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 85 The M3 series, M7 series, and M8 series are available now. – M3: supports an SD card. – M7: supports a mini Serial Advanced Technology Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 86: Ar2500 Series
Table 3-2 AR2500 series naming conventions Field Meaning Description Product name AR: application and access routers. Hardware platform series Currently, three router series are available: 1, 2 and 3. A larger value indicates higher performance. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 87: Ar500 Series
Table 3-3 Mapping between the AR502CG-L router and software versions Device Model Software Version AR502CG-L V200R008C30 and later versions Appearance and Structure Figure 3-3 shows the appearance of the AR502CG-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 88 (optional). The external antenna is connected to the LTE antenna interface. l You can choose the built-in or external antenna on the web management system. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 89: Industrial Ac Power Module
Product model silkscreen 10 SIM card cover Indicator Description Figure 3-4 shows indicators on the AR502CG-L router. Figure 3-4 Indicators on the AR502CG-L CON RS232 MGMT GE0 V; 1 A Config AR502CG-L Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 90 Fast blinking green: The system is loading or undergoing a USB-based deployment. Steady red: A system fault or USB-based deployment failure has occurred and requires manual intervention. Off: The system software is not running or is resetting. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 91 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-5 lists GE electrical interface attributes. Table 3-5 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 92 LTE antenna interface LTE antenna interfaces of a router include a MAIN interface (for the primary antenna). The primary antenna transmits and receives LTE signals. Table 3-7 lists LTE antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 93 Table 3-8 DI/DO interface attributes Attribute Description Connector type 5-pin Phoenix terminal block Signal type l DI: 9.6-60 V DC power input l DO: Boolean value (short circuit and open circuit) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 94 USB interfaces Service interfaces LAN interfaces: two GE electrical interfaces, which can be used as WAN interfaces WAN interfaces: one LTE antenna interface Industrial service interface: CON/RS232 interface and DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 95 Table 3-10 Mapping between the AR502EG-L router and software versions Device Model Software Version AR502EG-L V200R008C20 and later versions Appearance and Structure Figure 3-5 shows the appearance of the AR502EG-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 96 Config Removing the SIM card cover from the bottom: OPEN WAN interfaces: two LTE antenna RS485/RS422 interface interfaces NOTE SG is the ground for RS485/RS422 signal isolation. RS232 interface DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 97 By default, the DIP switch is in RS485 state and works in half-duplex mode, with pull-up and pull-down resistance of 150 kohm and without 120 ohm matched load resistance. Indicator Description Figure 3-6 shows indicators on the AR502EG-L. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 99 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 100 RS232 interface attributes. Table 3-11 RS232 interface attributes Attribute Description Connector type DB9 Female Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 101 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-13 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 102 Frequency Division Duplexing (FDD) LTE: uplink rate of 50 Mbit/s and downlink rate of 150 Mbit/s Cable type 6.3.2 LTE Whip Antenna 6.3.4 Outdoor LTE Antenna 6.3.3 LTE Indoor Remote Antenna DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 103 The AR502EG-L router has no fans and uses natural heat dissipation. Technical Specifications Table 3-17 lists technical specifications of the AR502EG-L router. Table 3-17 AR502EG-L technical specifications Item Specification System parameters Processor Dual-core, 700 MHz Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 104 -25°C to +70°C (-13°F to +158°F) Storage temperature -40°C to +85°C (-40°F to +185°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude < 5000 m (16404 ft.) Part number 50010307 (256 MB) 50010435 (512 MB) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 105 Table 3-18 Mapping between the AR502EG-La router and software versions Device Model Software Version AR502EG-La V200R009C00SPC301 and later versions Appearance and Structure Figure 3-7 shows the appearance of the AR502EG-La router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 106 AR502EG-La Config Removing the SIM card cover from the bottom: WAN interfaces: two LTE antenna RS485/RS422 interface interfaces NOTE SG is the ground for RS485/RS422 signal isolation. RS232 interface DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 107 By default, the DIP switch is in RS485 state and works in half-duplex mode, with pull-up and pull-down resistance of 150 kohm and without 120 ohm matched load resistance. Indicator Description Figure 3-8 shows indicators on the AR502EG-La. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 108 3 and 4 Green Steady on: A SIM card is installed in the slot and is working normally. Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 109 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 110 RS232 interface attributes. Table 3-19 RS232 interface attributes Attribute Description Connector type DB9 Female Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 111 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-21 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 112 DI/DO interface The DI/DO interfaces are used to detect voltage level signals or deliver instructions. Table 3-23 lists DI/DO interface attributes. Table 3-23 DI/DO interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 113 Table 3-25 lists technical specifications of the AR502EG-La router. Table 3-25 AR502EG-La technical specifications Item Specification System parameters Processor Dual-core, 700 MHz Memory 512 MB Flash 512 MB Dimensions and weight Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 114 Operating relative humidity 5% to 95%, noncondensing Operating altitude < 5000 m (16404 ft.) Part number 50010442 3.2.4 AR502EG-Lj Version Mapping Table 3-26 describes the mapping between the AR502EG-Lj router and software versions. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 115 Appearance and Structure Figure 3-9 shows the appearance of the AR502EG-Lj router. Figure 3-9 AR502EG-Lj appearance Interfaces on the router: MGMT GE0 AR502EG-Lj Config Removing the SIM card cover from the bottom: Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 116 By default, the DIP switch is in RS485 state and works in half-duplex mode, with pull-up and pull-down resistance of 150 kohm and without 120 ohm matched load resistance. Indicator Description Figure 3-10 shows indicators on the AR502EG-Lj. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 117 3 and 4 Green Steady on: A SIM card is installed in the slot and is working normally. Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 118 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 119 Attribute Description Connector type DB9 Female Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Cable type 6.7 RS232 Cable GE Electrical Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 120 Table 3-29 lists USB interface attributes. Table 3-29 USB interface attributes Attribute Description Connector type TYPE-A Standards compliance USB 2.0 Working mode Host LTE Antenna Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 121 LVTTL voltage level, digital input/output Cable type 6.2.7 RJ-45 Connector (DI/DO) RS485/RS422 Interface The RS485/RS422 interface can be connected to a meter or monitoring terminal. Table 3-32 lists RS485/RS422 interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 122 Power specifications DC power input l Rated voltage: 12 V DC/24 V DC l Maximum voltage range: 8 V DC to 36 V DC DI/DO interface parameter Voltage level standard: LVTTL Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 123 Table 3-34 Mapping between the AR502EG-L-PD router and software versions Router Model Software Version AR502EG-L-PD V200R009C00SPC301 and later versions Appearance and Structure Figure 3-11 shows the appearance of the AR502EG-L-PD router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 124 A GE(PoE) electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives service traffic at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. A PoE device is connected through this interface to power the router. Table 3-35 lists GE/PoE electrical interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 125 Working mode Host RS232 interface The RS232 interface can be connected to a data terminal for data transmission or to a console for onsite configuration. Table 3-37 lists RS232 interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 126 9.06 in. x 4.13 in.) Weight 2.13 kg (4.70 lb) Power consumption Maximum power consumption 10 W Power specifications Input power PoE: in compliance with IEEE 802.3af and 802.3at Interface density Management interface USB interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 127 Table 3-39 Mapping between the AR502EGW-L router and software versions Device Model Software Version AR502EGW-L V200R008C20 and later versions Appearance and Structure Figure 3-12 shows the appearance of the AR502EGW-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 128 Config Removing the SIM card cover from the bottom: OPEN WAN interfaces: two LTE antenna RS485/RS422 interface interfaces NOTE SG is the ground for RS485/RS422 signal isolation. RS232 interface DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 129 120 ohm matched load resistance. card. l If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-13 shows indicators on the AR502EGW-L. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 130 3 and 4 Green Steady on: A SIM card is installed in the slot and is working normally. Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 131 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 132 The RS232 interface can be connected to a data terminal for data transmission or to a console for onsite configuration. Table 3-40 lists RS232 interface attributes. Table 3-40 RS232 interface attributes Attribute Description Connector type DB9 Female Standards compliance RS232 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 133 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-42 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 134 Frequency Division Duplexing (FDD) LTE: uplink rate of 50 Mbit/s and downlink rate of 150 Mbit/s Cable type 6.3.2 LTE Whip Antenna 6.3.4 Outdoor LTE Antenna 6.3.3 LTE Indoor Remote Antenna Wi-Fi antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 135 The RS485/RS422 interface can be connected to a meter or monitoring terminal. Table 3-46 lists RS485/RS422 interface attributes. Table 3-46 RS485/RS422 interface attributes Attribute Description Connector type 5-pin Phoenix terminal block Standards compliance RS485/RS422 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 136 DC power input l Rated voltage: 12 V DC/24 V DC l Maximum voltage range: 8 V DC to 36 V DC DI/DO interface parameter Voltage level standard: LVTTL Interface density Management interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 137 Table 3-48 Mapping between the AR502EGRb-L router and software versions Router Model Software Version AR502EGRb-L V200R008C50 and later versions Appearance and Structure Figure 3-14 shows the appearance of the AR502EGRb-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 138 Config Removing the SIM card cover from the bottom: OPEN WAN interfaces: two LTE antenna RS485/RS422 interface interfaces NOTE SG is the ground for RS485/RS422 signal isolation. RS232 interface DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 139 120 ohm matched load resistance. card. l If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-15 shows indicators on the AR502EGRb-L. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 140 3 and 4 Green Steady on: A SIM card is installed in the slot and is working normally. Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 141 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 142 GE interface. Interface Description RS232 interface The RS232 interface can be connected to a data terminal for data transmission or to a console for onsite configuration. Table 3-49 lists RS232 interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 143 Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol Cable type 6.6 Ethernet Cable USB interface Do not remove the USB flash drive during a USB-based deployment. Otherwise, the system will restart. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 144 Mbit/s and downlink rate of 21.6 Mbit/s l DC-HSPA+: uplink rate of 5.76 Mbit/s and downlink rate of 43.2 Mbit/s l Frequency Division Duplexing (FDD) LTE: uplink rate of 50 Mbit/s and downlink rate of 150 Mbit/s Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 145 6.2.8 5-Pin Phoenix Connector (RS485/ RS422) RF antenna interface An RF antenna interface connects to an RF antenna to receive and transmit wireless data. Table 3-55 lists the attributes of an RF antenna interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 146 DC power input l Rated voltage: 12 V DC/24 V DC l Maximum voltage range: 8 V DC to 36 V DC DI/DO interface parameter Voltage level standard: LVTTL Interface density Management interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 147 Table 3-57 Mapping between the AR502EGRc-Lc router and software versions Router Model Software Version AR502EGRc-Lc V200R008C50 and later versions Appearance and Structure Figure 3-16 shows the appearance of the AR502EGRc-Lc router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 148 Config Removing the SIM card cover from the bottom: OPEN WAN interfaces: two LTE antenna RS485/RS422 interface interfaces NOTE SG is the ground for RS485/RS422 signal isolation. RS232 interface DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 149 120 ohm matched load resistance. card. l If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-17 shows indicators on the AR502EGRc-Lc. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 150 3 and 4 Green Steady on: A SIM card is installed in the slot and is working normally. Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 151 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 152 The RS232 interface can be connected to a data terminal for data transmission or to a console for onsite configuration. Table 3-58 lists RS232 interface attributes. Table 3-58 RS232 interface attributes Attribute Description Connector type DB9 Female Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 153 Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol Cable type 6.6 Ethernet Cable USB interface Do not remove the USB flash drive during a USB-based deployment. Otherwise, the system will restart. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 154 SMA-K (screw threads outside and a hole inside) Standards l LTE FDD: bands 1/3/8 compliance and l LTE TDD: bands 38/39/40/41 frequency bands l DC-HSPA+/HSPA+/HSPA/UMTS: bands 1/5/8/9 supported l TD-SCDMA: bands 34/39 l GSM/GPRS/EDGE: 900/1800 (MHz) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 155 Table 3-62 lists DI/DO interface attributes. Table 3-62 DI/DO interface attributes Attribute Description Connector type RJ45 Signal type LVTTL voltage level, digital input/output Cable type 6.2.7 RJ-45 Connector (DI/DO) RS485/RS422 interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 156 Cable type 6.3.6 433 MHz RF Remote Antenna Heat Dissipation The AR502EGRc-Lc router has no fans and uses natural heat dissipation. Technical Specifications Table 3-65 lists technical specifications of the AR502EGRc-Lc router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 157 -25°C to +65°C (-13°F to +149°F) l Operating at typical LTE transmit power: -25°C to +70°C (-13°F to +158°F) Storage temperature -40°C to +85°C (-40°F to +185°F) Operating relative humidity 5% to 95%, noncondensing Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 158 Table 3-66 Mapping between the AR502EGRz-Lc router and software versions Device Model Software Version AR502EGRz-Lc V200R009C00 and later versions Appearance and Structure Figure 3-18 shows the appearance of the AR502EGRz-Lc router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 159 Industrial Switch Routers 3 Chassis Hardware Description Figure 3-18 AR502EGRz-Lc appearance WAN interfaces: two LTE antenna RS485/RS422 interface interfaces NOTE SG is the ground for RS485/RS422 signal isolation. CON/RS232 interface DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 160 120 ohm matched load resistance. card. l If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-19 shows indicators on the AR502EGRz-Lc. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 161 When a USB flash drive is connected to the router, the ALM indicator works as the USB indicator: Steady red: The system fails to be upgraded or configured using the USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 162 Three indicators off: No signal is available. vertically on the panel, which turn on in sequence. More RSSI indicators in steady on state indicate a larger received signal strength indicator (RSSI) value and higher signal strength. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 163 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-68 lists GE electrical interface attributes. Table 3-68 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 164 DIV interface (for the secondary antenna). The primary and secondary antennas work together. The primary antenna transmits and receives LTE signals, and the secondary antenna helps improve the quality of received LTE signals. Table 3-70 lists LTE antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 165 DI/DO interface A DI interface receives alarm input (9.6-60 V), and a DO interface sends output signals to instruct an external device to perform required actions. Table 3-71 lists DI/DO interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 166 A ZigBee antenna interface connects to a ZigBee antenna to transmit and receive wireless data. Table 3-73 lists ZigBee antenna interface attributes. Table 3-73 ZigBee antenna interface attributes Attribute Description Connector type Standards compliance IEEE 802.15.4 Frequency bands supported 2.4 GHz Rate 250 kbit/s Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 167 Maximum power consumption Power specifications DC power input l Rated voltage: 12 V DC/24 V DC l Maximum voltage range: 8 V DC to 36 V DC Interface density Management interfaces USB interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 168 Table 3-75 Mapping between the AR502EGRz-L router and software versions Device Model Software Version AR502EGRz-L V200R009C00 and later versions Appearance and Structure Figure 3-20 shows the appearance of the AR502EGRz-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 169 Industrial Switch Routers 3 Chassis Hardware Description Figure 3-20 AR502EGRz-L appearance WAN interfaces: two LTE antenna RS485/RS422 interface interfaces NOTE SG is the ground for RS485/RS422 signal isolation. CON/RS232 interface DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 170 120 ohm matched load resistance. card. l If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-21 shows indicators on the AR502EGRz-L. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 171 When a USB flash drive is connected to the router, the ALM indicator works as the USB indicator: Steady red: The system fails to be upgraded or configured using the USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 172 Three indicators off: No signal is available. vertically on the panel, which turn on in sequence. More RSSI indicators in steady on state indicate a larger received signal strength indicator (RSSI) value and higher signal strength. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 173 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-77 lists GE electrical interface attributes. Table 3-77 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 174 DIV interface (for the secondary antenna). The primary and secondary antennas work together. The primary antenna transmits and receives LTE signals, and the secondary antenna helps improve the quality of received LTE signals. Table 3-79 lists LTE antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 175 Table 3-80 DI/DO interface attributes Attribute Description Connector type 5-pin Phoenix terminal block Signal type l DI: 9.6-60 V DC power input l DO: Boolean value (short circuit and open circuit) RS485/RS422 interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 176 6.3.14 Wi-Fi Strip-Shaped Remote Antenna 6.3.10 Wi-Fi Antenna Heat Dissipation The AR502EGRz-L router has no fans and uses natural heat dissipation. Technical Specifications Table 3-83 lists technical specifications of the AR502EGRz-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 177 -25°C to +70°C (-13°F to +158°F) Storage temperature -40°C to +85°C (-40°F to +185°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude < 5000 m (16404 ft.) Part number 50010398 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 178 AR502G-L-D-H router and software versions. Table 3-84 Mapping between the AR502G-L-D-H router and software versions Router Model Software Version AR502G-L-D-H V200R005C80, V200R007C00 Appearance and Structure Figure 3-22 shows the panel of the AR502G-L-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 179 Primary LTE diversity antenna interface DI/DO Interface LTE diversity antenna interface Ground point NOTE The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 180 120 ohm matched load resistance. card. l If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-23 shows the indicators on the AR502G-L-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 181 Off: The system is running properly. Green l Slow blinking: The system is running properly. l Fast blinking: The system is powering on or restarting. l Off: The system software is not running or is resetting. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 182 Off: The GE interface is in Link Down state. Interface Description RS232 Interface The RS232 interface can be connected to a data terminal for data transmission or to a console for onsite configuration. Table 3-85 lists RS232 interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 183 Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol Cable type 6.6 Ethernet Cable USB Interface Do not remove the USB flash drive during a USB-based deployment. Otherwise, the system will restart. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 184 Table 3-88 LTE antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Standards compliance l GSM/GPRS/EDGE: bands 2/3/5/8 l WCDMA/HSDPA/HSUPA/HSPA+: bands 1/8 l LTE FDD: band 3 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 185 The DI/DO interfaces are used to detect voltage level signals or deliver instructions. Table 3-89 lists DI/DO interface attributes. Table 3-89 DI/DO interface attributes Attribute Description Connector type RJ45 Signal type LVTTL voltage level, digital input/output Cable type 6.2.7 RJ-45 Connector (DI/DO) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 186 150 mm x 100 mm x 44 mm (5.9 in. x 3.9 in. x 1.7 in.), 1 U height Weight 0.85 kg (1.87 lb) Power consumption Maximum power consumption Power specifications Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 187 Operating relative humidity 5% to 95%, noncondensing Operating altitude < 5000 m (16404 ft.) Part number 50010259 3.2.12 AR502GR-L-D-H Version Mapping Table 3-92 lists the mapping between the AR502GR-L-D-H router and software versions. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 188 Software Version AR502GR-L-D-H V200R007C00 Appearance and Structure Figure 3-24 shows the panel of the AR502GR-L-D-H router. Figure 3-24 AR502GR-L-D-H panel Interfaces on the router: Removing the SIM card cover from the bottom: Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 189 150 kohm and without 120 ohm matched load resistance. Indicator Description Figure 3-25 shows the indicators on the AR502GR-L-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 190 3 and 4 Green l Steady on: A SIM card is installed in the corresponding slot and is working normally. l Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 191 Three indicators off: No signal is available. the panel, which turn on in sequence. More RSSI indicators in steady on state indicate a larger received signal strength indicator (RSSI) value and higher signal strength. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 192 6.7 RS232 Cable GE Electrical Interface A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-94 lists GE electrical interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 193 The primary antenna interface receives and transmits LTE signals. The diversity antenna interface supports 2x2 MIMO and helps improve quality of received LTE signals. Table 3-96 lists LTE antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 194 6.3.2 LTE Whip Antenna 6.3.3 LTE Indoor Remote Antenna 6.3.4 Outdoor LTE Antenna DI/DO Interface The DI/DO interfaces are used to detect voltage level signals or deliver instructions. Table 3-97 lists DI/DO interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 195 Table 3-99 lists ZigBee antenna interface attributes. Table 3-99 ZigBee antenna interface attributes Attribute Description Connector type RP-SMA female connector Standards compliance IEEE802.15.4 Frequency bands supported 2.4 GHz Rate 250 kbit/s Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 196 Technical Specifications Table 3-101 lists technical specifications of the AR502GR-L-D-H router. Table 3-101 AR502GR-L-D-H technical specification Item Specification System parameters Processor HI6921 Memory 256 MB Flash 512 MB Dimensions and weight Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 197 -35°C to +75°C (-31°F to +167°F) when it transmits LTE signals at the the highest transmit power. Operating relative humidity 5% to 95%, noncondensing Operating altitude < 5000 m (16404 ft.) Part number 50010276 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 198 4: + 5: ACC Power input jack LTE1 antenna interface NOTE Use a DC power cable to connect the router to an external power source. LTE0 antenna interface GPS/BDS antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 199 The SIM card slots support double-card single-standby. single-standby. l The router must use industrial SIM cards. l The router must use industrial SIM cards. Indicator Description Figure 3-27 shows the indicators on the AR503EDGW-Lc. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 200 Huawei AR500&AR510&AR531&AR550&1500&AR2500 Industrial Switch Routers 3 Chassis Hardware Description Figure 3-27 Indicators on the AR503EDGW-Lc 2.4G LTE1 LTE0 /BDS 1: - 2: - 3: + 4: + 5: ACC Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 201 Off: No LTE/3G/2G signal is available. GE interface Green Steady on: A link has been established on the indicators interface. (GE0 to GE3) Blinking: Data is being transmitted or received on the link. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 202 DIV interface (for the secondary antenna). The primary and secondary antennas work together. The primary antenna transmits and receives LTE signals, and the secondary antenna helps improve the quality of received LTE signals. Table 3-104 lists attributes of an LTE antenna interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 203 6.3.5 LTE Strip-shaped Remote Antenna GPS/BDS antenna interface A GPS/BDS antenna interface can connect to a GPS/BDS remote antenna to provide the GPS/BDS positioning function. Table 3-105 lists the attributes of a GPS/BDS antenna interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 204 A USB interface provides up to 480 Mbit/s upload and download rates. Table 3-107 lists attributes of a USB interface. Table 3-107 USB interface attributes Attribute Description Connector type Type A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 205 The AR503EDGW-Lc router has no fans and uses natural heat dissipation. Technical Specifications Table 3-109 lists the technical specifications of the AR503EDGW-Lc router. Table 3-109 AR503EDGW-Lc technical specifications Item Specification System parameters Processor Dual-core, 1.2 GHz Memory 1 GB Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 206 Service interfaces WAN interfaces: four LTE antenna interfaces LAN interfaces: three Wi-Fi antenna interfaces and four GE electrical interfaces Multimedia service interface: One GPS/BDS antenna interface Extended slots Not supported Environment parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 207 Table 3-110 Mapping between the AR503EDGW-Lc3 router and software versions Router Model Software Version AR503EDGW-Lc3 V200R008C50 and later versions Appearance and Structure Figure 3-28 shows the appearance of the AR503EDGW-Lc3 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 208 To restore the factory settings, hold down the button for at least 5 seconds. l To reset the system, press the button. Resetting the router will interrupt services. Exercise caution when deciding to press this button. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 209 13 Two SIM card slots of LTE1 NOTE l The SIM card slots support double-card single-standby. l The router must use industrial SIM cards. Indicator Description Figure 3-29 shows the indicators on the AR503EDGW-Lc3. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 210 Huawei AR500&AR510&AR531&AR550&1500&AR2500 Industrial Switch Routers 3 Chassis Hardware Description Figure 3-29 Indicators on the AR503EDGW-Lc3 2.4G LTE1 LTE0 LTE0 LTE1 /BDS 2.4G 1: - AR503EDGW-Lc3 3: + 100-110 V;1 A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 211 Green Steady on: The LTE/3G/2G signal strength is high. Off: No LTE/3G/2G signal is available. LTE0 Green Steady on: The LTE/3G/2G signal strength is high. Off: No LTE/3G/2G signal is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 212 LTE antenna interface LTE antenna interfaces of a router include a MAIN interface (for the primary antenna) and a DIV interface (for the secondary antenna). The primary and secondary antennas work Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 213 6.3.5 LTE Strip-shaped Remote Antenna GPS/BDS antenna interface A GPS/BDS antenna interface can connect to a GPS/BDS remote antenna to provide the GPS/BDS positioning function. Table 3-113 lists the attributes of a GPS/BDS antenna interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 214 A USB interface provides up to 480 Mbit/s upload and download rates. Table 3-115 lists attributes of a USB interface. Table 3-115 USB interface attributes Attribute Description Connector type Type A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 215 The AR503EDGW-Lc3 router has no fans and uses natural heat dissipation. Technical Specifications Table 3-117 lists the technical specifications of the AR503EDGW-Lc3 router. Table 3-117 AR503EDGW-Lc3 technical specifications Item Specification System parameters Processor Dual-core, 1.2 GHz Memory 1 GB Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 216 Service interfaces WAN interfaces: four LTE antenna interfaces LAN interfaces: six Wi-Fi antenna interfaces and four GE electrical interfaces Multimedia service interface: one GPS/BDS antenna interface Extended slots Not supported Environment parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 217 Table 3-118 Mapping between the AR503EDGW-Lo router and software versions Router Model Software Version AR503EDGW-Lo V200R009C00 and later versions Appearance and Structure Figure 3-30 shows the appearance of the AR503EDGW-Lo router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 218 To restore the factory settings, hold down the button for at least 5 seconds. l To reset the system, press the button. Resetting the router will interrupt services. Exercise caution when deciding to press this button. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 219 The SIM card slots support double-card single-standby. single-standby. l The router must use industrial SIM cards. l The router must use industrial SIM cards. Indicator Description Figure 3-31 shows indicators on the AR503EDGW-Lo. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 220 Huawei AR500&AR510&AR531&AR550&1500&AR2500 Industrial Switch Routers 3 Chassis Hardware Description Figure 3-31 Indicators on the AR503EDGW-Lo Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 221 Blinking: Data is being transmitted or received on the link. Off: No link is established on the corresponding interface. Green Steady on: The system power supply is normal. Off: The system power is off. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 222 LTE signals. Table 3-120 lists LTE antenna interface attributes. Table 3-120 LTE antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 223 GPS/BDS positioning function. Table 3-121 lists the attributes of a GPS/BDS antenna interface. Table 3-121 GPS/BDS antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 224 A USB interface provides up to 480 Mbit/s upload and download rates. Table 3-123 lists attributes of a USB interface. Table 3-123 USB interface attributes Attribute Description Connector type Type A Standards compliance USB2.0 Working mode Host Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 225 Table 3-125 AR503EDGW-Lo technical specifications Item Specification System parameters Processor Dual-core, 1.2 GHz Memory 1 GB Flash 512 MB Micro SD card Not supported Hard disk mSATA hard disk supported Dimensions and weight Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 226 When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). Storage -40°C to +85°C (-40°F to +185°F) temperature Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 227 V200R008C30 and later versions Appearance and Structure Figure 3-32 shows the appearance of the AR503EQGW-L router. Figure 3-32 AR503EQGW-L appearance LTE3 LTE2 /BDS 1: - AR503EQGW-L 3: + 100-110 V;1 A 9 1011 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 228 The SIM card slots support double-card single-standby. single-standby. l The router must use industrial SIM cards. l The router must use industrial SIM cards. Indicator Description Figure 3-33 shows the indicators on the AR503EQGW-L. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 229 Figure 3-33 Indicators on the AR503EQGW-L 2.4G LTE3 LTE2 LTE1 LTE0 DANGER Do not plug/unplug power connector with power on. LTE3 LTE2 /BDS 1: - AR503EQGW-L 3: + 100-110 V;1 A 11 12 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 230 Green Steady on: The LTE/3G/2G signal strength is high. Off: No LTE/3G/2G signal is available. LTE0 Green Steady on: The LTE/3G/2G signal strength is high. Off: No LTE/3G/2G signal is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 231 LTE antenna interface LTE antenna interfaces of a router include a MAIN interface (for the primary antenna) and a DIV interface (for the secondary antenna). The primary and secondary antennas work Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 232 Table 3-129 GPS/BDS antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Frequency bands supported l GPS: 1575.42 MHz l BDS: 1561.098 MHz Cable type 6.3.15 GPS/BDS Remote Antenna Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 233 Type A Standards compliance USB2.0 Working mode Host Wi-Fi antenna interface A Wi-Fi antenna interface connects to a Wi-Fi antenna to transmit and receive data. Table 3-132 lists Wi-Fi antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 234 Dimensions (W x 280 mm x 200 mm x 44.4 mm (11.0 in. x 7.9 in. x 1.75 in.), 1 U D x H) height Weight 2.7 kg (5.95 lb) Power specifications Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 235 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). Storage -40°C to +85°C (-40°F to +185°F) temperature Operating relative 5% to 95%, noncondensing humidity Operating altitude < 5000 m (16404.2 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 236 LAN interfaces: four GE electrical USB interface (host) interfaces NOTE l LAN interfaces GE0 to GE3 can be configured as WAN interfaces. l GE0 is a management interface and is used to upgrade the router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 237 CONSOLE interface Ground point NOTE To protect the router from lightning and interference, reliably ground the router using 6.8 Ground Cable. Indicator Description Figure 3-35 shows the indicators on the AR503EW router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 238 Industrial Switch Routers 3 Chassis Hardware Description Figure 3-35 Indicators on the AR503EW 2.4G DANGER Do not plug/unplug power connector with power on. AR503EW 1: - 3: + 100-110 V;1 A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 239 Steady on: The system power supply is normal. Off: The system power is off. Red and Slow blinking green: The system is running green properly. Fast blinking green: The system is being powered on or restarting. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 240 Ethernet interfaces of most network adapters are MDI interfaces. l MDIX stands for medium dependent interface crossover, a version of MDI. MDIX interfaces are usually used on hubs or LAN switches. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 241 2.4 GHz l 5.0 GHz Rate 1750 Mbit/s MIMO mode (Tx x Rx) Gain 2.15 dBi/3.0 dBi Services provided l Layer 2/3 wireless access l Wireless data encryption l WLAN security Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 242 PoE power supply Supported on GE electrical interfaces GE0 to GE3, with a maximum of 30 W power on each interface Power consumption Maximum power 55 W consumption Heat dissipation Fans None Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 243 Table 3-140 lists the mapping between the AR503GW-LM7 router and software versions. Table 3-140 Mapping between the AR503GW-LM7 router and software versions Router Model Software Version AR503GW-LM7 V200R006C12 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 244 To reset the system, press the button. Resetting the router will interrupt services. Exercise caution when deciding to press this button. Reserved 3G/LTE antenna interface 3G/LTE antenna interface GPS antenna interface 10 Two Wi-Fi antenna interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 245 Fast blinking green: The system is being powered on or restarting. Steady red: A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 246 Steady on: The LTE/3G/2G signal strength is (indicator for high. the 3G/LTE1 Fast blinking: The LTE/3G/2G signal strength is antenna medium. interface) Slow blinking: The LTE/3G/2G signal strength is low. Off: No LTE/3G/2G signal is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 247 Table 3-141 RS232 interface attributes Attribute Description Connector type DB9 Female Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Cable type 6.7 RS232 Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 248 Table 3-143 GPS antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Frequency bands supported 1575 MHz Cable type GPS+LTE remote diversity antenna GE Electrical Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 249 Type A Standards compliance USB2.0 Working mode Host Wi-Fi Antenna Interface A Wi-Fi antenna interface connects to a Wi-Fi antenna to transmit and receive data. Table 3-146 lists Wi-Fi antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 250 Dimensions and weight Dimensions (W x 200 mm x 160 mm x 44 mm (7.87 in. x 6.30 in. x 1.73 in.), 1 U D x H) height Weight 1.4 kg (3.09 lb) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 251 When the altitude is between 1800 m and 5000 m, the highest operating temperature reduces by 1°C every time the altitude increases by 220 m. Storage -40°C to +85°C (-40°F to +185°F) temperature Operating relative 5% to 95%, noncondensing humidity Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 252 RS232 interface NOTE NOTE Use a DC power cable to connect the router The RS232 interface can be used as a console to an external power source. interface to configure the router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 253 Exercise caution when deciding to press this button. Reserved 3G/LTE antenna interface 3G/LTE antenna interface GPS/BDS antenna interface 10 Two Wi-Fi antenna interfaces Indicator Description Figure 3-39 shows the indicators on the AR503GW-LcM7 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 254 Off: The system software is not running or is resetting. Red and Steady green: The system has been upgraded or green configured using a USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 255 Off: No LTE/3G/2G signal is available. GPS/BDS Green Steady on: The GPS/BDS function is enabled. Off: The GPS/BDS function is disabled. WLAN1 Green Blinking: Data is being transmitted on the (working at WLAN link. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 256 3G/LTE Antenna Interface 3G/LTE antenna interfaces of a router include a MAIN interface (for the primary antenna) and a DIV interface (for the secondary antenna). The primary and secondary antennas work Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 257 GPS/BDS Antenna Interface A GPS/BDS antenna interface can connect to a GPS/BDS+LTE remote diversity antenna to provide the GPS/BDS positioning function. Table 3-151 lists attributes of a GPS/BDS antenna interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 258 A USB interface provides up to 480 Mbit/s upload and download rates. Table 3-153 lists attributes of a USB interface. Table 3-153 USB interface attributes Attribute Description Connector type Type A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 259 The AR503GW-LcM7 router has no fans and uses natural heat dissipation. Technical Specifications Table 3-155 lists the technical specifications of the AR503GW-LcM7 router. Table 3-155 AR503GW-LcM7 technical specifications Item Specification System parameters Processor Dual-core, 1 GHz Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 260 USB 2.0 interfaces Service interfaces WAN interfaces: one GE electrical interface and two 3G/LTE (standard antenna interfaces configuration) LAN interfaces: two Wi-Fi antenna interfaces Multimedia service interface: one GPS/BDS antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 261 Table 3-156 Mapping between the AR503GW-Lo router and software versions Router Model Software Version AR503GW-Lo V200R009C00SPC301 and later versions Appearance and Structure Figure 3-40 shows the appearance of the AR503GW-Lo router. Figure 3-40 AR503GW-Lo appearance Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 262 Exercise caution when deciding to press this button. Reserved 3G/LTE antenna interface 3G/LTE antenna interface GPS antenna interface 10 Two Wi-Fi antenna interfaces Indicator Description Figure 3-41 shows indicators on the AR503GW-Lo router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 263 Off: The system software is not running or is resetting. Red and Steady green: The system has been upgraded or green configured using a USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 264 Off: No LTE/3G/2G signal is available. Green Steady on: The GPS function is enabled. Off: The GPS function is disabled. WLAN1 Green Blinking: Data is being transmitted on the (working at WLAN link. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 265 3G/LTE Antenna Interface 3G/LTE antenna interfaces of a router include a MAIN interface (for the primary antenna) and a DIV interface (for the secondary antenna). The primary and secondary antennas work Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 266 A GPS antenna interface can connect to a GPS+LTE remote diversity antenna to provide the GPS positioning function. Table 3-159 lists attributes of a GPS antenna interface. Table 3-159 GPS antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 267 A USB interface provides up to 480 Mbit/s upload and download rates. Table 3-161 lists attributes of a USB interface. Table 3-161 USB interface attributes Attribute Description Connector type Type A Standards compliance USB2.0 Working mode Host Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 269 When the altitude is between 1800 m and 5000 m, the highest operating temperature reduces by 1°C every time the altitude increases by 220 m. Storage -40°C to +85°C (-40°F to +185°F) temperature Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 270 Table 3-164 Mapping between the AR503HGW-L router and software versions Router Model Software Version AR503HGW-L V200R009C00 and later versions Appearance and Structure Figure 3-42 shows the appearance of the AR503HGW-L router. Figure 3-42 AR503HGW-L appearance Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 271 Exercise caution when deciding to press this button. Reserved 3G/LTE antenna interface 3G/LTE antenna interface GPS antenna interface 10 2 Wi-Fi antenna interfaces Indicator Description Figure 3-43 shows indicators on the AR503HGW-L. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 272 Off: The system software is not running or is resetting. Red and Steady green: The system has been upgraded or green configured using a USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 273 Off: No LTE/3G/2G signal is available. Green Steady on: The GPS function is enabled. Location Off: The GPS function is disabled. WLAN1 Green Blinking: Data is being transmitted on the (working at WLAN link. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 274 Attribute Description Connector type DB9 Female Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Cable type 6.7 RS232 Cable 3G/LTE antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 275 Table 3-167 lists GPS antenna interface attributes. Table 3-167 GPS antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Frequency bands supported 1575 MHz Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 276 A USB interface provides up to 5 Gbit/s upload and download rates. Table 3-169 lists USB interface attributes. Table 3-169 USB interface attributes Attribute Description Connector type TYPE A Standards compliance USB3.0 Working mode Host Wi-Fi antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 277 Table 3-171 AR503HGW-L technical specifications Item Specification System parameters Processor Dual-core, 1 GHz Memory 1 GB Flash 256 MB Micro SD card None (default sd1) Hard disk mSATA hard disk supported Dimensions and weight Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 278 0°C to +60°C (32°F to 140°F) temperature NOTE When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 279 Table 3-172 Mapping between the AR503HGW-Lc router and software versions Router Model Software Version AR503HGW-Lc V200R009C00 and later versions Appearance and Structure Figure 3-44 shows the appearance of the AR503HGW-Lc router. Figure 3-44 AR503HGW-Lc appearance Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 280 Exercise caution when deciding to press this button. Reserved 3G/LTE antenna interface 3G/LTE antenna interface GPS/BDS antenna interface 10 2 Wi-Fi antenna interfaces Indicator Description Figure 3-45 shows indicators on the AR503HGW-Lc. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 281 Off: The system software is not running or is resetting. Red and Steady green: The system has been upgraded or green configured using a USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 282 Slow blinking: The LTE/3G/2G signal strength is low. Off: No LTE/3G/2G signal is available. GPS/BDS Green Steady on: The GPS/BDS function is enabled. (BDS stands for BeiDou Navigation Satellite System.) Off: The GPS/BDS function is disabled. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 283 Table 3-173 RS232 interface attributes Attribute Description Connector type DB9 Female Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Cable type 6.7 RS232 Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 284 6.3.5 LTE Strip-shaped Remote Antenna GPS/BDS antenna interface A GPS/BDS antenna interface can connect to a GPS/BDS+LTE remote diversity antenna to provide the GPS/BDS positioning function. Table 3-175 lists GPS/BDS antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 285 USB interface (host) A USB interface provides up to 5 Gbit/s upload and download rates. Table 3-177 lists USB interface attributes. Table 3-177 USB interface attributes Attribute Description Connector type TYPE A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 286 The AR503HGW-Lc router has no fans and uses natural heat dissipation. Technical Specifications Table 3-179 lists technical specifications of the AR503HGW-Lc router. Table 3-179 AR503HGW-Lc technical specifications Item Specification System parameters Processor Dual-core, 1 GHz Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 287 1 (DB9) USB 3.0 interfaces Service interfaces WAN interfaces: one GE electrical interface and two 3G/LTE antenna interfaces LAN interfaces: two Wi-Fi antenna interfaces Multimedia service interface: one GPS/BDS antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 288 Table 3-180 Mapping between the AR509CG-Lc router and software versions Router Model Software Version AR509CG-Lc V200R008C20 and later versions Appearance and Structure Figure 3-46 shows the appearance of the AR509CG-Lc router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 289 Removing the SIM card cover from the bottom: OPEN LTE antenna interface Ground point NOTE To protect the router from lightning and interference, reliably ground the router using 6.8 Ground Cable. USB interface (host) CON/RS232 interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 290 SIM1. l Use a DC power cable to connect the router to an external power source. Indicator Description Figure 3-47 shows the indicators on the AR509CG-Lc. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 291 3 and 4 Green Steady on: A SIM card is installed in the corresponding slot and is working normally. Off: No SIM card is installed in the corresponding slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 292 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 293 The CON/RS232 interface of a router can connect to an operation terminal for onsite configuration. Table 3-181 lists attributes of the CON/RS232 interface. Table 3-181 CON/RS232 interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 294 DIV interface (for the secondary antenna). The primary and secondary antennas work together. The primary antenna transmits and receives LTE signals, and the secondary antenna helps improve the quality of received LTE signals. Table 3-184 lists LTE antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 295 6.3.3 LTE Indoor Remote Antenna 6.3.4 Outdoor LTE Antenna Heat Dissipation The AR509CG-Lc router has no fans and uses natural heat dissipation. Technical Specifications Table 3-185 lists the technical specifications of the AR509CG-Lc router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 296 -25°C to +70°C (-13°F to +158°F) Storage temperature -40°C to +85°C (-40°F to +185°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude < 5000 m (16404.2 ft.) Part number 50010329 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 297 Table 3-186 Mapping between the AR509CG-Lt router and software versions Router Model Software Version AR509CG-Lt V200R008C20 and later versions Appearance and Structure Figure 3-48 shows the appearance of the AR509CG-Lt router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 298 Removing the SIM card cover from the bottom: OPEN LTE antenna interface Ground point NOTE To protect the router from lightning and interference, reliably ground the router using 6.8 Ground Cable. USB interface (host) CON/RS232 interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 299 SIM1. l Use a DC power cable to connect the router to an external power source. Indicator Description Figure 3-49 shows the indicators on the AR509CG-Lt. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 300 3 and 4 Green Steady on: A SIM card is installed in the corresponding slot and is working normally. Off: No SIM card is installed in the corresponding slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 301 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 302 The CON/RS232 interface of a router can connect to an operation terminal for onsite configuration. Table 3-187 lists attributes of the CON/RS232 interface. Table 3-187 CON/RS232 interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 303 DIV interface (for the secondary antenna). The primary and secondary antennas work together. The primary antenna transmits and receives LTE signals, and the secondary antenna helps improve the quality of received LTE signals. Table 3-190 lists attributes of an LTE antenna interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 304 6.3.3 LTE Indoor Remote Antenna 6.3.4 Outdoor LTE Antenna Heat Dissipation The AR509CG-Lt router has no fans and uses natural heat dissipation. Technical Specifications Table 3-191 lists the technical specifications of the AR509CG-Lt router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 305 Operating at typical LTE transmit power: -25°C to +70°C (-13°F to +158°F) Storage temperature -40°C to +85°C (-40°F to +185°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude < 5000 m (16404.2 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 306 Table 3-192 Mapping between the AR509CG-Lt-7 router and software versions Router Model Software Version AR509CG-Lt-7 V200R008C50 and later versions Appearance and Structure Figure 3-50 shows the appearance of the AR509CG-Lt-7 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 307 Removing the SIM card cover from the bottom: OPEN LTE antenna interface Ground point NOTE To protect the router from lightning and interference, reliably ground the router using 6.8 Ground Cable. USB interface (host) CON/RS232 interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 308 If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-51 shows the indicators on the AR509CG-Lt-7. Figure 3-51 Indicators on the AR509CG-Lt-7 CON RS232 MGMT GE0 Config AR509CG-Lt-7 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 309 – Steady green: The system has been upgraded or configured using the USB flash drive. – Fast blinking: The system is being upgraded or configured using the USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 310 The CON/RS232 interface of a router can connect to an operation terminal for onsite configuration. Table 3-193 lists attributes of the CON/RS232 interface. Table 3-193 CON/RS232 interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 311 A USB interface provides up to 480 Mbit/s upload and download rates. Table 3-195 lists attributes of a USB interface. Table 3-195 USB interface attributes Attribute Description Connector type Type A Standards compliance USB2.0 Working mode Host Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 312 General Packet Radio Service (GPRS): uplink rate of 85.6 kbit/s and downlink rate of 85.6 kbit/s Network protocols LTE, WCDMA, GSM Cable type 6.3.2 LTE Whip Antenna 6.3.3 LTE Indoor Remote Antenna 6.3.4 Outdoor LTE Antenna Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 313 V DC Interface density Management interfaces USB interfaces Service interfaces LAN interfaces: four GE electrical interfaces WAN interfaces: two LTE antenna interfaces Industrial service interface: one CON/ RS232 interface Environment parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 314 Table 3-198 Mapping between the AR509CGW-L router and software versions Router Model Software Version AR509CGW-L V200R008C50 and later versions Appearance and Structure Figure 3-52 shows the appearance of the AR509CGW-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 315 Removing the SIM card cover from the bottom: OPEN WAN interfaces: two LTE antenna Ground point interfaces NOTE To protect the router from lightning and interference, reliably ground the router using 6.8 Ground Cable. USB interface CON/RS232 interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 316 SIM1 is the default master card. l If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-53 shows indicators on the AR509CGW-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 317 3 and 4 Green Steady on: A SIM card is installed in the slot and is working normally. Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 318 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 319 Interface Description CON/RS232 interface The CON/RS232 interface can connect to an operation terminal for onsite configuration. Table 3-199 lists CON/RS232 interface attributes. Table 3-199 CON/RS232 interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 320 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-201 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 321 Frequency Division Duplexing (FDD) LTE: uplink rate of 50 Mbit/s and downlink rate of 150 Mbit/s Cable type 6.3.2 LTE Whip Antenna 6.3.4 Outdoor LTE Antenna 6.3.3 LTE Indoor Remote Antenna Wi-Fi antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 322 Dimensions (W x D x H) 150 mm x 100 mm x 44 mm (5.9 in. x 3.9 in. x 1.7 in.), 1 U height Weight 0.653 kg (1.440 lb) Power consumption Maximum power consumption Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 323 Table 3-205 Mapping between the AR509G-L-D-H router and software versions Router Model Software Version AR509G-L-D-H V200R006C10 and later versions Appearance and Structure Figure 3-54 shows the appearance of the AR509G-L-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 324 GE0 is a management interface and is used to upgrade the router. l All GE LAN interfaces can be configured as WAN interfaces. NOTE Electrical interfaces GE0 to GE3 support PoE+. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 325 PDs (such as IP phones, WLAN APs, and cameras) connected to GE interfaces of the router. 11 USB interface (host) Indicator Description Figure 3-55 shows the indicators on the AR509G-L-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 326 Slow blinking: The system is running properly. l Fast blinking: The system is being powered on or restarting. l Steady red: A system fault has occurred and requires manual intervention. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 327 Steady on: A link has been established on the VDSL interface. l Blinking: Data is being transmitted or received on the VDSL interface. l Off: No link is established on the VDSL interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 328 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-207 lists GE electrical interface attributes. Table 3-207 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 329 Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Standards l LTE FDD: bands 1/2/3/4/5/7/8/20 compliance and l DC-HSPA+/HSPA+/HSPA/WCDMA: bands 1/2/5/8 frequency bands l GSM/GPRS/EDGE: 850/900/1800/1900 (MHz) supported Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 330 Mbit/s and uplink rate of 1 Mbit/s l ADSL full rate mode (G.992.1 G.DMT): downlink rate of 8 Mbit/s and uplink rate of 1 Mbit/s Cable type 6.9 Standard Telephone Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 331 (DC) Maximum output current RPS power supply Not supported PoE power supply Supported Power consumption Maximum power 12 W consumption Heat dissipation Fans None Airflow (facing the None front panel) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 332 Table 3-212 lists the mapping between the AR509G-Lc router and software versions. Table 3-212 Mapping between the AR509G-Lc router and software versions Router Model Software Version AR509G-Lc V200R006C17, V200R008C30 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 333 LAN interfaces: four GE electrical interfaces NOTE l GE0 is a management interface and is used to upgrade the router. l All GE LAN interfaces can be configured as WAN interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 334 PDs (such as IP phones, WLAN APs, and cameras) connected to GE interfaces of the router. 11 USB interface (host) Indicator Description Figure 3-57 shows the indicators on the AR509G-Lc router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 335 Slow blinking green: The system is running properly. l Fast blinking green: The system is being powered on or is restarting. l Steady red: A system fault has occurred and requires manual intervention. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 336 Steady on: A link has been established on the VDSL interface. l Blinking: Data is being transmitted or received on the VDSL interface. l Off: No link is established on the VDSL interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 337 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-214 lists GE electrical interface attributes. Table 3-214 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 338 Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Standards l LTE FDD: bands 1/2/3/4/5/7/8/20 compliance and l DC-HSPA+/HSPA+/HSPA/WCDMA: bands 1/2/5/8 frequency bands l GSM/GPRS/EDGE: 850/900/1800/1900 (MHz) supported Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 339 Mbit/s and uplink rate of 1 Mbit/s l ADSL full rate mode (G.992.1 G.DMT): downlink rate of 8 Mbit/s and uplink rate of 1 Mbit/s Cable type 6.9 Standard Telephone Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 340 10.8 V to 13.2 V voltage (DC) Maximum output current RPS power supply Not supported PoE power supply Supported Power consumption Maximum power 12 W consumption Heat dissipation Fan module None Airflow Interface density Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 341 Table 3-219 lists the mapping between the AR509GW-L-D-H router and software versions. Table 3-219 Mapping between the AR509GW-L-D-H router and software version Router Model Software Version AR509GW-L-D-H V200R007C02, V200R008C50 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 342 LAN interfaces: four GE electrical interfaces NOTE l GE0 is a management interface and is used to upgrade the router. l All GE LAN interfaces can be configured as WAN interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 343 PDs (such as IP phones, WLAN APs, and cameras) connected to GE interfaces of the router. 11 USB interface (host) 12 Two Wi-Fi antenna interfaces Indicator Description Figure 3-59 shows the indicators on the AR509GW-L-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 344 Slow blinking green: The system is running properly. Fast blinking green: The system is being powered on or is restarting. Steady red: A system fault has occurred and requires manual intervention. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 345 Steady on: A link has been established on the VDSL interface. Blinking: Data is being transmitted or received on the VDSL interface. Off: No link is established on the VDSL interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 346 A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-221 lists GE electrical interface attributes. Table 3-221 GE electrical interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 347 LTE signals. Table 3-223 lists LTE antenna interface attributes. Table 3-223 LTE antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 348 VDSL interface. Table 3-224 VDSL interface attributes Attribute Description Connector type RJ11 Standards l ITU-T G.993.2 compliance l ITU-T G.992.5 l ITU-T G.992.3 l ITU-T G.992.1 G.DMT l ANSI T1.413 Issue 2 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 349 WLAN security Cable type 6.3.10 Wi-Fi Antenna Heat Dissipation The AR509GW-L-D-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-226 lists the technical specifications of the AR509GW-L-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 350 Supported Power consumption Maximum power 12 W consumption Heat dissipation Fans None Airflow (facing the None front panel) Interface density Management 1 (RJ45) interfaces CON/RS232 1 (RJ45) interfaces USB 2.0 interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 351 Table 3-227 Mapping between the AR511GW-LAV2M3 router and software versions Router Model Software Version AR511GW-LAV2M3 V200R005C30 and later versions Appearance and Structure Figure 3-60 shows the appearance of the AR511GW-LAV2M3 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 352 The router must use industrial SIM cards. l The mounting hole above the SIM card slots is used to fix the SIM card cover with a screw. 11 Micro SD card slot 12 CONSOLE interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 353 Figure 3-61 Indicators on the AR511GW-LAV2M3 WWAN RSSI MODE WLAN1 WLAN2 GE 0 GE 1 RE SE T CO NS OL m icr o SD OT G 10 11 micro SD RESET CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 354 Off: No LTE/3G/2G signal is available. MODE Green Steady on: An LTE connection has been established. Slow blinking: A 3G/2G connection has been established. Off: No LTE, 3G, or 2G connection is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 355 Two audio outputs and one audio input Cable type Audio cable Video Interface A video interface supports three formats of video outputs: HDMI, CVBS, and YPrPb. Table 3-229 lists attributes of a video interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 356 Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Standards compliance and l FDD LTE: bands 1/2/3/5/7/8/20 frequency bands supported l WCDMA/HSDPA/HSUPA/HSPA+: bands 1/2/5/8 l GSM/GPRS/EDGE: 850/900/1800/1900 (MHz) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 357 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-233 lists GE electrical interface attributes. Table 3-233 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 358 Table 3-235 lists attributes of a Micro USB interface. Table 3-235 Micro USB interface attributes Attribute Description Connector type Micro USB, B socket Standards compliance USB2.0 Working mode Wi-Fi Antenna Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 359 Specification System parameters Processor Quad-core, 1.2 GHz Memory 2 GB Nand Flash 2 GB EMMC Flash 4 GB Micro SD card None (default: sd1) Hard disk Not supported Dimensions and weight Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 360 WAN interfaces: two GE electrical interfaces and two 3G/LTE (standard antenna interfaces configuration) LAN interfaces: two Wi-Fi antenna interfaces Multimedia service interfaces: one GPS antenna interface, one audio interface, and two video interfaces Extended slots Not supported Environment parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 361 Table 3-238 Mapping between the AR511CGW-LAV2M3 router and software versions Router Model Software Version AR511CGW-LAV2M3 V200R006C15 and later versions Appearance and Structure Figure 3-62 shows the appearance of the AR511CGW-LAV2M3 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 362 The router must use industrial SIM cards. l The mounting hole above the SIM card slots is used to fix the SIM card cover with a screw. 11 Micro SD card slot 12 CONSOLE interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 363 Figure 3-63 Indicators on the AR511CGW-LAV2M3 WWAN RSSI MODE WLAN1 WLAN2 GE 0 GE 1 RE SE T CO NS OL m icr o SD OT G 10 11 micro SD RESET CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 364 Off: No LTE/3G/2G signal is available. MODE Green Steady on: An LTE connection has been established. Slow blinking: A 3G/2G connection has been established. Off: No LTE, 3G, or 2G connection is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 365 Two audio outputs and one audio input Cable type Audio cable Video Interface A video interface supports three formats of video outputs: HDMI, CVBS, and YPrPb. Table 3-240 lists attributes of a video interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 366 SMA-K (screw threads outside and a hole inside) Standards l FDD LTE: bands 1/3/8 compliance and l TDD LTE: bands 38/39/40/41 frequency bands l HSPA+: bands 1/2/5/8 supported l TD-SCDMA: bands 34/39 l GSM/GPRS/EDGE: 900/1800/1900 (MHz) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 367 Table 3-243 GPS antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Frequency bands supported 1575 MHz Cable type GPS+LTE remote diversity antenna GE Electrical Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 368 USB Interface (OTG) A USB interface (OTG) is also called a Micro USB interface. It can connect to an operation terminal for onsite configuration. Table 3-246 lists attributes of a Micro USB interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 369 The AR511CGW-LAV2M3 router has no fans and uses natural heat dissipation. Technical Specifications Table 3-248 lists the technical specifications of the AR511CGW-LAV2M3 router. Table 3-248 AR511CGW-LAV2M3 technical specifications Item Specification System parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 370 Not supported Power consumption Maximum power 30 W consumption Heat dissipation Fans None Airflow (facing the None front panel) Interface density Management None interfaces Console interfaces 1 (Micro USB) USB 2.0 interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 371 Table 3-249 Mapping between the AR511GW-LM7 router and software versions Router Model Software Version AR511GW-LM7 V200R005C31 and later versions Appearance and Structure Figure 3-64 shows the appearance of the AR511GW-LM7 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 372 The router must use industrial SIM cards. l The mounting hole above the SIM card slots is used to fix the SIM card cover with a screw. Micro SD card slot 10 CONSOLE interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 373 Figure 3-65 Indicators on the AR511GW-LM7 WWAN RSSI MODE WLAN1 WLAN2 G E0 RE SE T CO NS O LE m icr o SD SA TA O TG 10 11 micro SD RESET SATA CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 374 Off: No LTE/3G/2G signal is available. MODE Green Steady on: An LTE connection has been established. Slow blinking: A 3G/2G connection has been established. Off: No LTE, 3G, or 2G connection is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 375 Micro USB data cable 3G/LTE Antenna Interface 3G/LTE antenna interfaces of a router include a primary antenna interface and a diversity antenna interface. The primary antenna interface receives and transmits 3G/LTE signals, and Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 376 GPS+LTE remote diversity antenna GE Electrical Interface A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-253 lists GE electrical interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 377 A USB interface (OTG) is also called a Micro USB interface. It can connect to an operation terminal for onsite configuration. Table 3-255 lists attributes of a Micro USB interface. Table 3-255 Micro USB interface attributes Attribute Description Connector type Micro USB, B socket Standards compliance USB2.0 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 378 Attachment (mSATA) hard disk to provide a large storage space. Table 3-257 lists attributes of the mSATA interface. Table 3-257 mSATA interface attributes Attribute Description Connector type USB3.0 Standards compliance l AHCI l NCQ Hard disk type mSATA hard disk Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 379 8 V DC to 36 V DC voltage (DC) Maximum output current RPS power supply Not supported PoE power supply Not supported Power consumption Maximum power 25 W consumption Heat dissipation Fans None Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 380 Table 3-259 lists the mapping between the AR511GW-L-B3 router and software versions. Table 3-259 Mapping between the AR511GW-L-B3 router and software versions Router Model Software Version AR511GW-L-B3 V200R005C32 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 381 The router must use industrial SIM cards. l The mounting hole above the SIM card slots is used to fix the SIM card cover with a screw. 11 Micro SD card slot 12 CONSOLE interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 382 Figure 3-67 Indicators on the AR511GW-L-B3 WWAN RSSI MODE WLAN1 WLAN2 GE 0 RE SE T CO NS OL m icr o SD OT G 10 11 micro SD RESET CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 383 Off: No LTE/3G/2G signal is available. MODE Green Steady on: An LTE connection has been established. Slow blinking: A 3G/2G connection has been established. Off: No LTE, 3G, or 2G connection is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 384 Two audio outputs and one audio input Cable type Audio cable Video Interface A video interface supports three formats of video outputs: HDMI, CVBS, and YPrPb. Table 3-261 lists attributes of a video interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 385 Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Standards compliance and l FDD LTE: bands 1/2/3/5/7/8/20 frequency bands supported l WCDMA/HSDPA/HSUPA/HSPA+: bands 1/2/5/8 l GSM/GPRS/EDGE: 850/900/1800/1900 (MHz) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 386 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-265 lists GE electrical interface attributes. Table 3-265 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 387 Table 3-267 lists attributes of a Micro USB interface. Table 3-267 Micro USB interface attributes Attribute Description Connector type Micro USB, B socket Standards compliance USB2.0 Working mode Wi-Fi Antenna Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 388 All channels in the ultra high frequency (UHF) band Standards compliance GB20600-2006 Cable type DTMB remote antenna Heat Dissipation The AR511GW-L-B3 router has no fans and uses natural heat dissipation. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 389 (DC) Maximum output current RPS power supply Not supported PoE power supply Not supported Power consumption Maximum power 30 W consumption Heat dissipation Fans None Airflow (facing the None front panel) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 390 Table 3-271 describes the mapping between the AR511EGW-LcAV2 router and software versions. Table 3-271 Mapping between the AR511EGW-LcAV2 router and software versions Router Model Software Version AR511EGW-LcAV2 V200R009C00 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 391 The router must use industrial SIM cards. l The mounting hole above the SIM card slots is used to fix the SIM card cover with a screw. 11 Micro SD card slot 12 CONSOLE interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 393 Off: No LTE/3G/2G signal is available. MODE Green Steady on: An LTE connection has been established. Slow blinking: A 3G/2G connection has been established. Off: No LTE/3G/2G connection is established. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 394 Two audio outputs and one audio input Cable type Audio cable Video interface A video interface supports two formats of video outputs: HDMI and CVBS. Table 3-273 lists video interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 395 LTE (FDD): bands 1/3/8; LTE (TDD): Standards compliance and frequency bands supported bands 39/40/41 (38), all bands with diversity l DC-HSPA+: bands 1/9/5/8; TDS: bands 34/39, all bands with diversity l GSM: 1800/900 (MHz) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 396 Table 3-276 GPS/BDS antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Frequency bands supported l GPS: 1575.42 MHz l BDS: 1561.098 MHz Cable type 6.3.15 GPS/BDS Remote Antenna Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 397 USB interface (OTG) A USB interface (OTG) is also called a Micro USB interface. It can connect to an operation terminal for onsite configuration. Table 3-279 lists attributes of a Micro USB interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 398 Cable type 6.3.13 Wi-Fi Rod Remote Antenna Heat Dissipation The AR511EGW-LcAV2 router has no fans and uses natural heat dissipation. Technical Specifications Table 3-281 lists technical specifications of the AR511EGW-LcAV2 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 399 Maximum output current RPS power supply Not supported PoE power supply Not supported Power consumption Maximum power 40 W consumption Heat dissipation Fans None Airflow (facing the None front panel) Interface density Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 400 Table 3-282 Mapping between the AR513W-V3M8 router and software versions Router Model Software Version AR513W-V3M8 V200R005C32 and later versions Appearance and Structure Figure 3-70 shows the appearance of the AR513W-V3M8 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 401: Ground Cable
6.8 Ground Cable. 11 RS485 interface 12 Audio interface (output) NOTE The router does not support RS485 serial interface functions. This interface is reserved for future use. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 402 Exercise caution when deciding to press this button. Indicator Description Figure 3-71 shows the indicators on the AR513W-V3M8 router. Figure 3-71 Indicators on the AR513W-V3M8 RS485 RESET USB0 AUDIO Output (OTG) CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 403 7 and 8 GE electrical Yellow ACT indicator blinking: Data is being interface transmitted or received. indicators: ACT indicator off: No data is being transmitted l 7: ACT or received. indicator Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 404 Audio Interface (Output) An audio interface provides one stereo audio output. Table 3-285 lists attributes of an audio interface. Table 3-285 Audio interface attributes Attribute Description Connector type 3.5 mm headset jack Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 405 A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-288 lists GE electrical interface attributes. Table 3-288 GE electrical interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 406 A USB interface provides up to 480 Mbit/s upload and download rates. Table 3-290 lists attributes of a USB interface. Table 3-290 USB interface attributes Attribute Description Connector type Type A Standards compliance USB2.0 Working mode Host Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 407 Cable type 6.3.13 Wi-Fi Rod Remote Antenna Heat Dissipation The AR513W-V3M8 router has no fans and uses natural heat dissipation. Technical Specifications Table 3-293 lists the technical specifications of the AR513W-V3M8 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 408 RPS power supply Not supported PoE power supply Not supported Power consumption Maximum power 30 W consumption Heat dissipation Fans None Airflow (facing the None front panel) Interface density Management None interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 409 AR513GW-LcV1 router and software versions. Table 3-294 Mapping between the AR513GW-LcV1 router and software versions Router Model Software Version AR513GW-LcV1 V200R007C00 Appearance and Structure Figure 3-72 shows the appearance of the AR513GW-LcV1 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 410 To restore the factory settings, hold down the button for at least 5 seconds. l To reset the system, press the button. Resetting the router will interrupt services. Exercise caution when deciding to press this button. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 411 Hardware Description 13 LTE antenna interface 14 This interface is reserved for future use. Indicator Description Figure 3-73 shows indicators on the AR513GW-LcV1. Figure 3-73 Indicators on the AR513GW-LcV1 (OTG) CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 412 Off: No LTE/3G/2G signal is available. MODE Green Steady on: An LTE connection has been established. Slow blinking: A 3G/2G connection has been established. Off: No LTE/3G/2G connection is established. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 413 A high definition multimedia interface (HDMI) interface provides HDMI video output. Table 3-295 lists HDMI interface attributes. Table 3-295 HDMI interface attributes Attribute Description Connector type HDMI connector Signal types supported HDMI signal Cable type HDMI Video Cable Console interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 414 Network protocol Cable type 6.6 Ethernet Cable FE electrical interface An FE electrical interface receives and transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-298 lists FE electrical interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 415 A USB interface (OTG) is also called a Micro USB interface. It can connect to an operation terminal for onsite configuration. Table 3-300 lists attributes of a Micro USB interface. Table 3-300 Micro USB interface attributes Attribute Description Connector type Micro USB, B socket Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 416 LTE signals. Table 3-302 lists LTE antenna interface attributes. Table 3-302 LTE antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 417 The AR513GW-LcV1 router has no fans and uses natural heat dissipation. Technical Specifications Table 3-303 lists technical specifications of the AR513GW-LcV1 router. Table 3-303 AR513GW-LcV1 technical specifications Item Specification System parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 418 RPS power supply Not supported PoE power supply Not supported Power consumption Maximum power 21.5 W consumption Heat dissipation Fans None Airflow (facing the None front panel) Interface density Management None interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 419 AR513W-V1 router and software versions. Table 3-304 Mapping between the AR513W-V1 router and software versions Router Model Software Version AR513W-V1 V200R007C00 Appearance and Structure Figure 3-74 shows the appearance of the AR513W-V1 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 420 To restore the factory settings, hold down the button for at least 5 seconds. l To reset the system, press the button. Resetting the router will interrupt services. Exercise caution when deciding to press this button. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 421 Steady on: The system power supply is normal. Off: The system power is off. Red and Slow blinking green: The system is running green properly. Fast blinking green: The system is powering on or restarting. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 422 Green LINK indicator steady on: A link has been l 9: LINK established on the interface. indicator LINK indicator off: No link is established on the interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 423 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-307 lists GE electrical interface attributes. Table 3-307 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 424 MDI. MDIX interfaces are usually used on hubs or LAN switches. Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol Cable type 6.6 Ethernet Cable USB interface (host) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 425 RP-SMA-K (screw threads outside and a pin inside) Standards compliance 802.11a/b/g/n l 2.4 GHz Frequency bands supported l 5.0 GHz Rate 600 Mbit/s MIMO mode (Tx x Rx) Gain 2.15 dBi Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 426 275.0 mm x 180.0 mm x 40.0 mm (10.9 in. x 7.1 in. x 1.6 in.), 1 U D x H) height Weight 1.6 kg (3.53 lb) Power specifications Rated input voltage 12 V (DC) Maximum input 11.4 V DC to 12.6 V DC voltage (DC) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 427 1°C every time the altitude increases by 220 m. Storage –40°C to +85°C (-40°F to + 185°F) temperature Operating relative 5% to 95%, noncondensing humidity Operating altitude < 5000 m (16404 ft.) Part number 02351GEY Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 428 DC power cable to supply power to the PD. WAN interfaces: four GE electrical LAN interfaces: four GE electrical interfaces interfaces NOTE GE0 is a management interface and is used to upgrade the router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 429 16 Console interface 17 USB interface (host) 18 Hard disk lock 19 Pluggable disk enclosure Indicator Description Figure 3-77 shows the indicators on the AR515GW-LM9-D series routers. Figure 3-77 Indicators on the AR515GW-LM9-D Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 430 Green Steady on: The 3G/2G signal strength is high. Fast blinking: The 3G/2G signal strength is medium. Slow blinking: The 3G/2G signal strength is low. Off: No 3G/2G signal is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 431 LTE Antenna Interface LTE antenna interfaces of a router include a primary antenna interface and a diversity antenna interface. The primary antenna interface receives and transmits LTE signals, and the diversity Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 432 GE Electrical Interface A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-317 lists attributes of a GE electrical interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 433 A high definition multimedia interface (HDMI) interface provides HDMI video output. Table 3-319 lists HDMI interface attributes. Table 3-319 HDMI interface attributes Attribute Description Connector type HDMI connector Signal types supported HDMI signal Cable type HDMI Video Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 434 Cable type 6.3.14 Wi-Fi Strip-Shaped Remote Antenna Heat Dissipation The AR515GW-LM9-D router has no fans and uses natural heat dissipation. Technical Specifications Table 3-322 lists the technical specifications of the AR515GW-LM9-D routers. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 435 The maximum power consumption is 42 W and the output voltage is 30W (12 V, 2.5 A). Heat dissipation Fans None Airflow (facing the None front panel) Interface density Management 1 (M12) interfaces Console interfaces 1 (DB9) USB 2.0 interfaces USB 3.0 interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 436 Table 3-323 Mapping between the AR515CGW-L router and software versions Router Model Software Version AR515CGW-L V200R009C00SPC301 and later versions Appearance and Structure Figure 3-78 shows the appearance of the AR515CGW-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 437 NOTE NOTE It can have a DB25 adapter cable connected l 12 V output to provide any of the following interfaces: l 5 V output l VAG l AV audio/video interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 438 NOTE This port is used to connect to a PC through a double USB cable to transmit hard disk data. Indicator Description Figure 3-79 shows indicators on the AR515CGW-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 439 USB flash drive. Blinking green: The system is being upgraded or configured using a USB flash drive. Steady red: The system fails to be upgraded or configured using a USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 440 Off: No hard disk is connected to the router. Interface Description Console interface The console interface of a router can connect to an operation terminal for onsite configuration. Table 3-324 lists attributes of the console interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 441 5.76 Mbit/s and downlink rate of 42 Mbit/s l Frequency Division Duplex-Long Term Evolution (FDD LTE): uplink rate of 50 Mbit/s and downlink rate of 150 Mbit/s Cable type 6.3.5 LTE Strip-shaped Remote Antenna GPS/BDS antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 442 IEEE 802.3, IEEE 802.3u, IEEE 802.3ab Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocols Cable type M12 cable VGA interface A video graphics array (VGA) interface provides VGA video output. Table 3-328 lists VGA interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 443 A Wi-Fi antenna interface connects to a Wi-Fi antenna to transmit and receive data. Table 3-331 lists Wi-Fi antenna interface attributes. Table 3-331 Wi-Fi antenna interface attributes Attribute Description Connector type RP-SMA-K (screw threads outside and a pin inside) Standards compliance 802.11a/b/g/n/ac Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 445 LAN interfaces: three Wi-Fi antenna interfaces and one GPS antenna interface Multimedia service interfaces: one VGA interface, one MIC interface, one AV audio/video interface, one pluggable hard disk cartridge Extended slots Not supported Environment parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 446 Table 3-333 Mapping between the AR531-2C-H router and software versions Device Model Software Version AR531-2C-H V200R005C60 and later versions NOTE This model does not match V200R008C00. Appearance and Structure Figure 3-80 shows the appearance of the AR531-2C-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 447 AC power socket USB interface NOTE l It is connected to an AC power supply device using a 4-pin AC power cable. l The router supports Huawei 4.9 180 W Midspan. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 448 11 Ground point NOTE The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Indicator Description Figure 3-81 shows indicators on the AR531-2C-H. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 449 Infrared This interface is used to transmit and receive infrared — communi signals (invisible light). cation interface Green Steady on: The router is powered on. Off: The router is powered off. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 450 Fast blinking: The RS485-1 link is available and is transmitting and receiving data. l Off: The RS485-1 link is not configured or has failed. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 451 MDI. MDIX interfaces are usually used on hubs or LAN switches. Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol Cable type 6.6 Ethernet Cable FE combo interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 452: Optical Fiber
480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-338 lists USB interface attributes. Table 3-338 USB interface attributes Attribute Description Connector type TYPE-A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 453 Cable type 6.2.11 8-Pin Phoenix Connector (RS485/DI) Heat Dissipation The AR531-2C-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-341 lists technical specifications of the AR531-2C-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 454 -40°C to +85°C (-40°F to +185°F) Operating temperature -40°C to +70°C (-40°F to +158°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Storage altitude ≤ 5000 m (16404 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 455 Figure 3-82 shows the panel of the AR531-F2C-H. Figure 3-82 AR531-F2C-H panel Power outage Survival MONITOR CONSOLE RS485-0 RS485-1 DI-0 DI-1 10 11 LAN interfaces: six FE optical interfaces 2 USB interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 456 NOTE The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Indicator Description Figure 3-83 shows the indicators on the AR531-F2C-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 457 Infrared This port is used to transmit and receive infrared signals communi (invisible light). cation port Green Steady on: The router is powered on. Off: The router is powered off. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 458 Fast blinking: The RS485-1 link is available and is transmitting and receiving data. l Off: The RS485-1 link is not configured or has failed. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 459 A GE optical interface transmits and receives Ethernet services at 1000 Mbit/s. Table 3-345 lists GE optical interface attributes. Table 3-345 GE optical interface attributes Attribute Description Connector type Standards compliance IEEE802.3z Rate 1000 Mbit/s Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 460 Table 3-347 RS485 interface attributes Attribute Description Connector type 8-pin connector (leftmost 4 pins for RS485 interfaces) Standards compliance RS485 Working mode Half-duplex Rate 1200-115200 bit/s Cable type 6.2.11 8-Pin Phoenix Connector (RS485/DI) DI Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 461 The AR531-F2C-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-350 lists technical specifications of the AR531-F2C-H router. Table 3-350 AR531-F2C-H technical specifications Item Specification System parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 462 Operating temperature -40°C to +70°C (-40°F to +158°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Storage altitude ≤ 5000 m (16404 ft.) Part number 50010173 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 463 AR531GPe-U-H. Figure 3-84 AR531GPe-U-H panel CONSOLE SIM1 SIM2 MONITOR RESERVE RS485-0 RS485-1 DI-0 DI-1 3G antenna interface Console interface NOTE The interface marked RESERVE is a reserved console interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 464 NOTE The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Indicator Description Figure 3-85 shows the indicators on the AR531GPe-U-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 465 Infrared This port is used to transmit and receive infrared signals communi (invisible light). cation port Green Steady on: The router is powered on. Off: The router is powered off. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 466 Fast blinking: The RS485-1 link is available and is transmitting and receiving data. l Off: The RS485-1 link is not configured or has failed. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 467 An FE electrical interface receives and transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-354 lists FE electrical interface attributes. Table 3-354 FE electrical interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 468 Optical fiber (inserted in an optical module) and GE Optical Module 6.6 Ethernet Cable GE Copper Module USB Interface Do not remove the USB flash drive during a USB-based deployment. Otherwise, the system will restart. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 469 Attribute Description Connector type 8-pin connector (rightmost 4 pins for DI interfaces) Signal type Passive DI signals, Boolean value (short circuit and open circuit) Cable type 6.2.11 8-Pin Phoenix Connector (RS485/DI) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 470 The AR531GPe-U-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-360 lists technical specifications of the AR531GPe-U-H router. Table 3-360 AR531GPe-U-H technical specifications Item Specification System parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 471 1.5 hours before they are powered on, the 3G module can work normally 20 minutes after startup. Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 472 AR531GR-U-H. Figure 3-86 AR531GR-U-H panel CONSOLE ZigBee/sub-GHz SIM1 SIM2 MONITOR RESERVE RS485-0 RS485-1 DI-0 DI-1 3G antenna interface Console interface NOTE The interface marked RESERVE is a reserved console interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 473 The router must be reliably grounded using a used as WAN interfaces. ground cable to protect the router from lightning and electromagnetic interference. Indicator Description Figure 3-87 shows the indicators on the AR531GR-U-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 474 Infrared This port is used to transmit and receive infrared signals communi (invisible light). cation port Green Steady on: The router is powered on. Off: The router is powered off. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 475 Fast blinking: The RS485-1 link is available and is transmitting and receiving data. l Off: The RS485-1 link is not configured or has failed. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 476 Data circuit-terminating equipment (DCE) Cable type 6.18 Console Cable FE Electrical Interface An FE electrical interface receives and transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-364 lists FE electrical interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 477 Description Connector type Standards compliance IEEE802.3z Rate 1000 Mbit/s Cable type l Optical fiber (inserted in an optical module) and GE Optical Module 6.6 Ethernet Cable GE Copper Module USB Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 478 DI interfaces are used to observe remote communication input and voltage level signals. Table 3-368 lists DI interface attributes. Table 3-368 DI interface attributes Attribute Description Connector type 8-pin connector (rightmost 4 pins for DI interfaces) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 479 Antenna type 6.3.1 3G Whip Antenna ZigBee antenna interface The ZigBee antenna interface connects to a ZigBee antenna to transmit and receive wireless data. Table 3-370 lists ZigBee antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 480 Data transmission Antenna type 6.3.22 sub-GHz Antenna Heat Dissipation The AR531GR-U-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-372 lists technical specifications of the AR531GR-U-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 481 3G antenna interfaces ZigBee/Sub-GHz antenna interfaces Service interfaces (standard configuration) l LAN interfaces: six FE electrical interfaces l Two GE optical interfaces Environment parameters Storage temperature -40°C to +85°C (-40°F to +185°F) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 483 Resetting the system will interrupt services. Exercise caution when performing this operation. 11 Ground point NOTE The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 484 RS485-1 3G/2G Table 3-374 Description of the indicators on the AR531G-U-D-H Indicato Color Description r/Button Infrared This port is used to transmit and receive infrared signals communi (invisible light). cation port Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 485 Fast blinking: The RS485-0 link is available and is transmitting and receiving data. l Off: The RS485-0 link is not configured or has failed. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 486 An FE electrical interface receives and transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-376 lists FE electrical interface attributes. Table 3-376 FE electrical interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 487 Optical fiber (inserted in an optical module) and GE Optical Module 6.6 Ethernet Cable GE Copper Module USB Interface Do not remove the USB flash drive during a USB-based deployment. Otherwise, the system will restart. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 488 Attribute Description Connector type 8-pin connector (rightmost 4 pins for DI interfaces) Signal type Passive DI signals, Boolean value (short circuit and open circuit) Cable type 6.2.11 8-Pin Phoenix Connector (RS485/DI) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 489 Heat Dissipation The AR531G-U-D-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-382 lists technical specifications of the AR531G-U-D-H. Table 3-382 AR531G-U-D-H technical specifications Item Specification System parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 490 1.5 hours before they are powered on, the 3G module can work normally 20 minutes after startup. Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Storage altitude ≤ 5000 m (16404 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 491 Table 3-383 Mapping between the AR550-8FE-D-H router and software versions Router Model Software Version AR550-8FE-D-H V200R005C70, V200R009C00 and later versions Appearance and Structure Figure 3-90 shows the panel of the AR550-8FE-D-H. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 492 GE0 through GE3 are uplink interfaces. USB interface Console interface DO interface Two DC power sockets NOTE The router supports Huawei 4.5 60 W Industrial AC Power Module 4.9 180 W Midspan. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 493 The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Indicator Description Figure 3-91 shows the indicators on the AR550-8FE-D-H router. Figure 3-91 Indicators on the AR550-8FE-D-H Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 494 Steady on: The corresponding LAN FE interface interface is in Link-Up state. indicators l Off: The corresponding LAN FE interface is in Link-Down state. l Blinking: The corresponding LAN FE interface is transmitting or receiving data. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 495 The console interface can connect to an operation terminal for onsite configuration. Table 3-385 lists console interface attributes. Table 3-385 Console interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 496 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-387 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 497 Cable type 6.2.2 3-Pin Phoenix Connector (DO) Heat Dissipation The AR550-8FE-D-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-389 lists technical specifications of the AR550-8FE-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 498 24 hours in a temperature range of -45°C to +75°C (-31°F to +167°F). Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Storage altitude ≤ 5000 m (16404 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 499 Table 3-390 Mapping between the AR550-24FE-D-H router and software versions Router Model Software Version AR550-24FE-D-H V200R005C70, V200R009C00 and later versions Appearance and Structure Figure 3-92 shows the panel of the AR550-24FE-D-H. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 500 Figure 3-92 Panel of the AR550-24FE-D-H LAN interfaces: 24 FE electrical LAN interfaces: four GE combo interfaces interfaces NOTE NOTE FE0 is an uplink interface. GE0 through GE3 are uplink interfaces. USB interface Console interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 501 The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Indicator Description Figure 3-93 shows the indicators on the AR550-24FE-D-H router. Figure 3-93 Indicators on the AR550-24FE-D-H Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 502 Steady on: The corresponding LAN FE interface interface is in Link-Up state. indicators l Off: The corresponding LAN FE interface is in Link-Down state. l Blinking: The corresponding LAN FE interface is transmitting or receiving data. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 503 The console interface can connect to an operation terminal for onsite configuration. Table 3-392 lists console interface attributes. Table 3-392 Console interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 504 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-394 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 505 Cable type 6.2.2 3-Pin Phoenix Connector (DO) Heat Dissipation The AR550-24FE-D-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-396 lists technical specifications of the AR550-24FE-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 506 24 hours in a temperature range of -45°C to +75°C (-31°F to +167°F). Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Storage altitude ≤ 5000 m (16404 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 507 Table 3-397 Mapping between the AR550C-4GE router and software versions Router Model Software Version AR550C-4GE V200R008C30 and later versions Appearance and Structure Figure 3-94 shows the appearance of the AR550C-4GE router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 508 Industrial AC Power Module 4.10 240 interference, reliably ground the router using W AC PoE Power Module. 6.8 Ground Cable. Console interface USB interface Indicator Description Figure 3-95 shows indicators on the AR550C-4GE. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 509 When a USB flash drive is connected to the router, the RUN indicator works as the USB indicator: l Steady on: USB-based deployment has been completed. l Fast blinking: The system is being upgraded using the USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 510 Table 3-398 Console interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Cable type 6.18 Console Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 511 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-400 lists USB interface attributes. Table 3-400 USB interface attributes Attribute Description Connector type TYPE-A Standards compliance USB 2.0 Working mode Host Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 512 The AR550C-4GE router has no fans and uses natural heat dissipation. Technical Specifications Table 3-403 lists technical specifications of the AR550C-4GE router. Table 3-403 AR550C-4GE technical specifications Item Specification System parameters Processor Dual-core, 700 MHz Memory 256 MB Flash 512 MB Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 513 -40°C to +85°C (-40°F to +185°F) Operating temperature -40°C to +70°C (-40°F to +158°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Part number 50010300 3.5.4 AR550C-2C6GE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 514 AR550C-2C6GE router. Figure 3-96 AR550C-2C6GE appearance MGMT PoE++ 0-1 PoE+ 2-7 DC1 DC2 RS485 D+ D- SG 54 V; 7.2 A 12-48 V; 1.5-0.4 A CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 515 6.8 Ground Cable. l The router supports Huawei 4.10 240 W AC PoE Power Module. Console interface 10 USB interface Indicator Description Figure 3-97 shows indicators on the AR550C-2C6GE. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 516 RUN indicator works as the USB indicator: l Steady on: USB-based deployment has been completed. l Fast blinking: The system is being upgraded or configured using the USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 517 The console interface can connect to an operation terminal for onsite configuration. Table 3-405 lists console interface attributes. Table 3-405 Console interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 518 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-407 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 519 2.5GE optical interface A 2.5GE optical interface supports GE/2.5GE auto-sensing and is used for data transmission and receiving at over 1 Gbit/s. Table 3-409 lists the attributes of a 2.5GE optical interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 521 Operating temperature -40°C to +70°C (-40°F to +158°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Storage altitude ≤ 5000 m (16404 ft.) Part number 50010301 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 522 Table 3-412 Mapping between the AR550C-2C6GE-2D router and software versions Device Model Software Version AR550C-2C6GE-2D V200R009C00 and later versions Appearance and Structure Figure 3-98 shows the appearance of the AR550C-2C6GE-2D router. Figure 3-98 AR550C-2C6GE-2D appearance Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 523 To protect the router from lightning and interference, reliably ground the router using 6.8 Ground Cable. USB interface 10 - Indicator Description Figure 3-99 shows indicators on the AR550C-2C6GE-2D. Figure 3-99 Indicators on the AR550C-2C6GE-2D Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 524 Steady on: A link has been established. interface Blinking: Data is being transmitted over the link. indicators Off: No link is established or no data is being (GE6 to transmitted on the link. GE7) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 525 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-414 lists GE electrical interface attributes. Table 3-414 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 526 Connector type TYPE-A Standards compliance USB 2.0 Working mode Host GE optical interface A GE optical interface transmits and receives Ethernet services at 1000 Mbit/s. Table 3-416 lists GE optical interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 527 A DI interface receives alarm input (9.6-60 V), and a DO interface sends output signals to instruct an external device to perform required actions. Table 3-418 lists the DI/DO interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 528 – Maximum voltage range: 44 V DC to 57 V DC l DC power input (PoE enabled): – Rated voltage: 56 V DC – Maximum voltage range: 54 V DC to 57 V DC Alarm output Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 529 Table 3-420 Mapping between the AR550E router and software versions Device Model Software Version AR550E V200R009C00 and later versions Appearance and Structure Figure 3-100 shows the appearance of the AR550E router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 530 7 Two DC power sockets Two PoE power jacks NOTE NOTE The router supports Huawei 4.5 60 W The router supports Huawei 4.10 240 W AC Industrial AC Power Module. PoE Power Module. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 531 Table 3-421 Description of indicators on the AR550E Indicato Color Description r/Button Red and Slow blinking green: The system is running properly. green Fast blinking green: The system is powering on or restarting. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 532 Green indicator steady on: A link has been electrical Yellow established on the interface. interface l Green indicator off: No link is established on the indicators interface. (GE0 to GE7) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 533 6.18 Console Cable GE electrical interface A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-423 lists GE electrical interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 534 10GE optical interface A 10GE optical interface supports GE/10GE auto-sensing and can send and receive data at 1 Gbit/s or 10 Gbit/s. Table 3-425 describes the attributes of a 10GE optical interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 535 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-427 lists USB interface attributes. Table 3-427 USB interface attributes Attribute Description Connector type TYPE-A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 536 Dimensions (W x D x H) 175 mm x 133 mm x 150 mm (6.89 in. x 5.24 in. x 5.91 in.) Weight 3 kg (6.61 lb) Power consumption Maximum power consumption 45 W Power specifications Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 537 -45°C to +70°C (-49°F to +158°F). Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Storage altitude ≤ 5000 m (16404 ft.) Part number 50010409 3.6 AR1500 Series Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 538 6.8 Ground Cable. Reset button USB interface NOTE l This button is used to reset the router. l Resetting the system will interrupt services. Exercise caution when performing this operation. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 539 Steady on: There are alarm output signals. Green l Steady on: The interface is in Link-Up state. interface l Off: The interface is in Link-Down state. indicator l Blinking: The interface is transmitting or receiving data. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 540 An FE electrical interface transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-433 lists FE electrical interface attributes. Table 3-433 FE electrical interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 541 100 Mbit/s Network protocols Cable type Optical fiber (inserted in an optical module) USB interface Do not remove the USB flash drive during a USB-based deployment. Otherwise, the system will restart. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 542 The ETH interface is used to log in to the router to perform configuration and management. Table 3-437 lists ETH interface attributes. Table 3-437 ETH interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 543 442.0 mm x 220.0 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.) D x H) Weight (empty 3.8 kg (8.38 lb) chassis) Power consumption (empty chassis) Typical power 13.5 W consumption Maximum power 15.2 W consumption Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 544 Table 3-439 describes the mapping between the AR1504-16S8T router and software versions. Table 3-439 Mapping between the AR1504-16S8T router and software versions Device Model Software Version AR1504-16S8T V200R009C00 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 545 Exercise caution when performing this operation. ETH interface Console interface NOTE An ETH interface is a management interface used to upgrade the router. Indicator Description Figure 3-105 shows indicators on the AR1504-16S8T. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 546 Green l Steady on: The interface is in Link-Up state. interface l Off: The interface is in Link-Down state. indicator l Blinking: The interface is transmitting or receiving data. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 547 An FE electrical interface transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-442 lists FE electrical interface attributes. Table 3-442 FE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE 802.3 l IEEE 802.3u l IEEE 802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 548 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-444 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 549 The ETH interface is used to log in to the router to perform configuration and management. Table 3-446 lists ETH interface attributes. Table 3-446 ETH interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE 802.3 l IEEE 802.3u l IEEE 802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 550 442.0 mm x 220.0 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.) D x H) Weight (empty 3.9 kg (8.60 lb) chassis) Power consumption (empty chassis) Typical power 15 W consumption Maximum power 17.3 W consumption Power specifications Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 551 Table 3-448 describes the mapping between the AR1504-24S router and software versions. Table 3-448 Mapping between the AR1504-24S router and software versions Device Model Software Version AR1504-24S V200R009C00 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 552 USB interface ETH interface NOTE An ETH interface is a management interface used to upgrade the router. Console interface Indicator Description Figure 3-107 shows indicators on the AR1504-24S. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 553 Green l Steady on: The interface is in Link-Up state. interface l Off: The interface is in Link-Down state. indicator l Blinking: The interface is transmitting or receiving data. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 554 An FE electrical interface transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-451 lists FE electrical interface attributes. Table 3-451 FE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE 802.3 l IEEE 802.3u l IEEE 802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 555 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-453 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 556 The ETH interface is used to log in to the router to perform configuration and management. Table 3-455 lists ETH interface attributes. Table 3-455 ETH interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE 802.3 l IEEE 802.3u l IEEE 802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 557 442.0 mm x 220.0 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.) D x H) Weight (empty 4.1 kg (9.04 lb) chassis) Power consumption (empty chassis) Typical power 15.5 W consumption Maximum power 20.65 W consumption Power specifications Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 558 Table 3-457 describes the mapping between the AR1504-24T router and software versions. Table 3-457 Mapping between the AR1504-24T router and software versions Device Model Software Version AR1504-24T V200R009C00 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 559 USB interface ETH interface NOTE An ETH interface is a management interface used to upgrade the router. Console interface Indicator Description Figure 3-109 shows indicators on the AR1504-24T. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 560 Green l Steady on: The interface is in Link-Up state. interface l Off: The interface is in Link-Down state. indicator l Blinking: The interface is transmitting or receiving data. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 561 An FE electrical interface transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-460 lists FE electrical interface attributes. Table 3-460 FE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE 802.3 l IEEE 802.3u l IEEE 802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 562 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-462 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 563 The ETH interface is used to log in to the router to perform configuration and management. Table 3-464 lists ETH interface attributes. Table 3-464 ETH interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE 802.3 l IEEE 802.3u l IEEE 802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 564 442.0 mm x 220.0 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.) D x H) Weight (empty 3.7 kg (8.16 lb) chassis) Power consumption (empty chassis) Typical power 10.22 W consumption Maximum power 13.38 W consumption Power specifications Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 565 5% to 95%, noncondensing humidity Operating altitude ≥ 5000 m (16404 ft.) Part number 50010400 3.7 AR2500 Series 3.7.1 AR2504-H Version Mapping Table 3-466 lists the mapping between the AR2504-H routers and software versions. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 566 Ground point Two power sockets NOTE The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Reserved DO interface Four GE electrical interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 567 Steady red: A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention. Green l Off: There are no alarm output signals. l Steady on: There are alarm output signals. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 568 Table 3-468 Console interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Cable type 6.18 Console Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 569 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-470 lists USB interface attributes. Table 3-470 USB interface attributes Attribute Description Connector type TYPE-A Standards compliance USB 2.0 Working mode Host Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 570 The ETH interface is used to log in to the route to perform configuration and management. Table 3-472 lists the attributes of the ETH interface. Table 3-472 ETH interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE802.3 l IEEE802.3u l IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 571 (19.0 in. x 17.4 in. x 1.7 in.), 1 U height Weight (empty 7 kg (15.4 lb) chassis) Power consumption (empty chassis) Typical power 15 W consumption Maximum power 25 W consumption Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 572 5% to 95%, noncondensing humidity Operating altitude < 5000 m (16404 ft.) Part number 02350KKH 3.7.2 AR2504-D-H Version Mapping Table 3-474 lists the mapping between the AR2504-D-H router and software versions. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 573 Resetting the system will interrupt services. Exercise caution when performing this operation. Ground point Two DC power sockets NOTE To protect the router from lightning and interference, reliably ground the router using a 6.8 Ground Cable. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 574 Fast blinking green: The system is powering on or is restarting. l Steady red: A fault that affects services has occurred on the card. The fault cannot be rectified automatically and requires manual intervention. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 575 The console interface can connect to an operation terminal for onsite configuration. Table 3-476 lists console interface attributes. Table 3-476 Console interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 576 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-478 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 577 6.2.2 3-Pin Phoenix Connector (DO) ETH interface The ETH interface is used to log in to the route to perform configuration and management. Table 3-480 lists the attributes of the ETH interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 578 With mounting brackets installed: 482.0 mm x 420.0 mm x 44.4 mm (18.98 in. x 16.5 in. x 1.74 in.), 1 U height Weight (empty 7 kg (15.43 lb) chassis) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 579 5% to 95%, noncondensing humidity Operating altitude < 5000 m (16404 ft.) Part number 02351AJM 3.7.3 AR2504E-H Version Mapping Table 3-482 lists the mapping between the AR2504E-H routers and software versions. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 580 The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Reserved DO interface Four GE electrical interfaces Four GE combo interfaces LAN interface: Two 10GE optical interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 581 Steady red: A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention. Green l Off: There are no alarm output signals. l Steady on: There are alarm output signals. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 582 Table 3-484 Console interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Cable type 6.18 Console Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 583 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-486 lists USB interface attributes. Table 3-486 USB interface attributes Attribute Description Connector type TYPE-A Standards compliance USB 2.0 Working mode Host Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 584 The ETH interface is used to log in to the route to perform configuration and management. Table 3-488 lists the attributes of the ETH interface. Table 3-488 ETH interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE802.3 l IEEE802.3u l IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 585 The AR2504E-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-490 lists technical specifications of the AR2504E-H router. Table 3-490 AR2504E-H technical specifications Item Specification System parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 586 NOTE temperature In compliance with IEC60068-2-1-2007 and ETSI EN 300 019-2-3 V2.2.2:2003, the router can operate reliably for 24 hours in a temperature range of -40°C to +70°C (-40°F to +158F). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 587 3 Chassis Hardware Description Item Specification Storage -40°C to +85°C (-40°F to +185°F) temperature Operating relative 5% to 95%, noncondensing humidity Operating altitude < 5000 m (16404 ft.) Part number 02350RBM Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 588 4.9 180 W PoE Midspan 4.10 240 W AC PoE Power Module 4.1 Overview of Power Modules Power Modules for AR500 Series Routers Table 4-1 lists the power modules for AR500 series routers. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 589 Huawei AR500&AR510&AR531&AR550&1500&AR2500 Industrial Switch Routers 4 Power Supplies Hardware Description Table 4-1 Power modules for AR500 series routers Product Model Power Module Delivered Optional Power Module by Default AR502CG-L No power module is delivered 60 W industrial AC power by default. This model is...
Page 590 2- l 180 W PoE midspan pin DC power terminal. Power Modules for AR550 Series Routers Table 4-4 lists the power modules for AR550 series routers. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 591 Optional Power Module by Default AR2504-H No power module is delivered 60 W AC power module by default. These models are AR2504E-H equipped with an embedded 3- pin AC/DC power terminal. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 592 PoE into a PoE-enabled GE interface. 4.3 24 W Integrated Power Adapter Product Support Table 4-8 lists the device models that support a 24 W integrated power adapter. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 593 When the short circuit is removed, the power adapter automatically resumes power supply. Heat dissipation The power adapter does not have built-in fans and uses nature heat dissipation. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 594 Standerd 02220363 24 W integrated power adapter- Europe Standerd 02220364 24 W integrated power adapter-UK Standerd 02220365 24 W integrated power adapter-US Standerd 02220366 24 W integrated power adapter- Australia Standerd Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 595 24 W integrated power adapter with an adapter cable. Figure 4-2 Appearance of a 24 W integrated power adapter with an adapter cable Function Table 4-13 describes functions of a 24 W integrated power adapter with an adapter cable. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 596 Maximum input current: 0.8 A Output Rated output voltage: 12 V DC Maximum output voltage range: 11.4 V DC to 12.6 V DC Maximum output power: 24 W Maximum output current: 2 A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 597 24 W integrated power adapter with an adapter cable-US Standerd 4.5 60 W Industrial AC Power Module Product Support Table 4-16 lists the device models that support a 60 W industrial AC power module. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 598 AR502EGRz-L AR502EGRz-Lc AR502EGW-L AR502G-L-D-H AR502GR-L-D-H AR509CG-Lc AR509CG-Lt AR509CGW-L AR509G-Lc AR509G-L-D-H AR509GW-L-D-H AR531G-U-D-H AR550-24FE-D-H AR550-8FE-D-H AR550C-2C6GE AR550C-4GE AR550E Appearance Figure 4-3 shows the appearance of a 60 W industrial AC power module. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 599 Output overvoltage The power module can automatically resume power supply protection from this protection state. Output current limiting The power module can automatically resume power supply protection from this protection state. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 600 Figure 4-4 Panel of a 60 W industrial AC power module Table 4-18 Components on the panel Number Name Description 2-pin DC output Connect the power cable to the router using a power socket power cable with a 2-pin plug. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 601 Rated output current: 5 A Ordering Information To place an order, visit http://e.huawei.com/cn/how-to-buy to find the local supplier or submit your inquiries online. Table 4-20 provides 60 W industrial AC power module ordering information. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 602 Table 4-22 describes functions of a 60 W DC power module. Table 4-22 Function description Function Description Input undervoltage The power module can automatically resume power supply protection from this protection state. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 603 Maximum output power: 60 W Ordering Information To place an order, visit http://e.huawei.com/cn/how-to-buy to find the local supplier or submit your inquiries online. Table 4-24 provides 60 W DC power module ordering information. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 604 Figure 4-6 shows the appearance of a 60 W AC power module. Figure 4-6 60 W AC power module Function Table 4-26 describes functions of a 60 W AC power module. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 605 AC power: 90 V to 264 V Maximum input current: 2 A Output l Rated output voltage: 12 V DC l Output voltage range: 11.64 V DC to 12.36 V DC l Maximum output power: 60 W Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 606 Module Name Product Support 100 W PoE power AR509G-Lc adapter AR509G-L-D-H AR509GW-L-D-H Appearance Figure 4-7 shows the appearance of a 100 W PoE power adapter. Figure 4-7 100 W PoE power adapter Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 607 Maximum input current: 2 A Output Rated output voltage: 48 V DC Maximum output voltage range: 45.6 V DC to 50.4 V DC Maximum output power: 100 W Maximum output current: 2.08 A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 608 180 W PoE midspan. Table 4-33 Product support Module Name Product Support 180 W PoE AR531-2C-H midspan AR531-F2C-H AR531GPe-U-H AR531GR-U-H AR531G-U-D-H AR550-8FE-D-H Appearance Figure 4-8 shows the appearance of a 180 W PoE midspan. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 609 Output current limiting The power module can automatically resume power supply protection from this protection state. Output short-circuit The power module can automatically resume power supply protection from this protection state. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 610 6.18 Console Cable to connect to the console for power commissioning. 2-pin DC output Connects the power module to a router using a power socket power cable with a 2-pin plug. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 611 11 and 12 GE electrical l Steady green: The power supply level for interface indicators PDs is 0 to 3. l Off: The interface is not supplying power to PDs. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 612 802.3at (a maximum of 30 W power) at the same time compliance Ordering Information To place an order, visit http://e.huawei.com/cn/how-to-buy to find the local supplier or submit your inquiries online. Table 4-37 provides 180 W PoE midspan ordering information. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 614 When the temperature falls into the normal range, the power module automatically resumes power supply. Panel Figure 4-11 shows the panel of a 240 W AC PoE power module. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 615 Off: The power output is abnormal or the power module is faulty. Technical Specifications Table 4-41 lists technical specifications of a 240 W AC PoE power module. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 616 Table 4-42 provides 240 W AC PoE power module ordering information. Table 4-42 Ordering information Part Number Model Name Label Description (Silkscreen) 02131265 PAC240S56- PAC240S56- AC-DC Power,-40degC,70degC,90V, 290V,56V/4.29A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 617: Cards
Table 5-1 Card types supported by AR models Card Type Card Name Card Maximum Weight Description Power Consumption Ethernet LAN 8ES2G 8-port 0.7 kg (1.54 lb) interface card 1000BASE (RJ45) L2 Ethernet interface card (industry) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 618 5.1.2 Card Structure and Dimensions Card Structure NOTE All wide service interface cards (WSICs) of AR series routers have the same structure. Figure 5-1 shows the structure of a WSIC card. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 619 Huawei AR500&AR510&AR531&AR550&1500&AR2500 Industrial Switch Routers 5 Cards Hardware Description Figure 5-1 WSIC card structure Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 620 – Plate: connects the ejector levers and the PCB to the panel. Labels, such as the bar code and laser label, are also attached on the plate. Card Dimensions Figure 5-2 illustrates the dimensions of a card. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 621 Huawei AR500&AR510&AR531&AR550&1500&AR2500 Industrial Switch Routers 5 Cards Hardware Description Figure 5-2 Card dimensions Heig Depth Width Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 622: Port Numbering
The interface sequence number indicates the position of an interface on a card. – If there is only one row of interfaces on a card, the interfaces are numbered from left to right, starting with 0. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 624 Industrial Switch Routers 5 Cards Hardware Description – If there are two rows of interfaces on a card, the interfaces are numbered from bottom to top and left to right, starting with 0. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 626: 8Es2G (8-Port 1000Base (Rj45) L2 Ethernet Interface Card (Industry))
An 8ES2G card can be used in industrial environments to provide gigabit Ethernet access, as shown in Figure 5-5. GE electrical interfaces on the card can connect to various devices such as switches, telephones, computers, and monitors. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 627 Huawei AR500&AR510&AR531&AR550&1500&AR2500 Industrial Switch Routers 5 Cards Hardware Description Figure 5-5 8ES2G card application Switch Computer Telephone Monitor industrial environment Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 628 8ES2G Table 5-5 8ES2G card indicator description Number Indicator Color Description STAT Green Slow blinking green: The system is running properly. Fast blinking green: The system is powering on or restarting. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 629 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 5-6 lists GE electrical interface attributes. Table 5-6 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 630 Dimensions (W x D x H): 201 mm x 223.5 mm x 19.82 mm (7.91 specifications in. x 8.8 in. x 0.78 in.) l Maximum power consumption: 7 W l Weight: 0.7kg (1.54 lb) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 631 For details, see the Huawei AR500&AR530&AR550&AR2500 Series Enterprise Routers Safety and Regulatory Compliance Information. Ordering Information To place an order, contact the Huawei local office. To download the system software, visit the Huawei Enterprise website (http://e.huawei.com). Table 5-8 provides the ordering information.
Page 632: 8Es2Gs (8-Port 1000Base (Sfp) L2 Ethernet Interface Card (Industry))
The 8ES2GS provides gigabit Ethernet access in an industrial environment, as shown inFigure 5-8. GE optical interfaces on the card can be connected to optical interfaces of switches using optical fibers, enabling long-distance data transmission. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 633 VLANIF interfaces are used as Layer 3 interfaces to support Layer 3 services. Layer 2 features MAC, Generic VLAN Registration Protocol (GVRP), Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree Protocol (MSTP), and Link Layer Discovery Protocol (LLDP). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 634 Off: No link is established or no data is being transmitted or received on the interface. Interface Description Figure 5-11 shows interfaces on an 8ES2GS card. Figure 5-11 Interfaces on an 8ES2GS card 8ES2GS Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 635 Dimensions (W x D x H): 201 mm x 223.5 mm x 19.82 mm (7.91 specifications in. x 8.8 in. x 0.78 in.) l Maximum power consumption: 11 W l Weight: 0.7kg (1.54 lb) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 636 For details, see the Huawei AR500&AR530&AR550&AR2500 Series Enterprise Routers Safety and Regulatory Compliance Information. Ordering Information To place an order, contact the Huawei local office. To download the system software, visit the Huawei Enterprise website (http://e.huawei.com). Table 5-14 provides the ordering information.
Page 637: Wan Interface Cards
Figure 5-12 shows the appearance of an 8AS card. Figure 5-12 8AS card appearance Version Mapping Table 5-15 describes the mapping between the 8AS and software versions. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 638 IP addresses and serial ports connected to them. Figure 5-14 Remote management through serial port redirection Session Console RouterB Console RouterC Network RouterA RouterD Console Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 639 Figure 5-15 Indicators on an 8AS card Table 5-17 8AS card indicator description Number Indicator Color Description STAT Green Slow blinking: The system is running properly. Fast blinking: The system is powering on or restarting. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 640 Table 5-18 Asynchronous serial interface attributes Attribute Description Connector type RJ45 Standards compliance and RS232 working mode Minimum baud rate 600 bit/s Maximum baud rate 115.2 kbit/s Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 641 Storage temperature: -40°C to +70°C (-40°F to +158°) l Operating relative humidity: 5% to 95%, noncondensing l Operating altitude: 0 m to 5000 m (0 ft. to 16404 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 642 For details, see the Huawei AR500&AR530&AR550&AR2500 Series Enterprise Routers Safety and Regulatory Compliance Information. Ordering Information To place an order, contact the Huawei local office. To download the system software, visit the Huawei Enterprise website (http://e.huawei.com). Table 5-20 provides the ordering information.
Page 643: 1Lte-L-H (Fdd/Hspa+ Industrial Data Card)
LTE network access As shown in Figure 5-18, enterprise users can connect to an LTE network through a 1LTE-L-Ht card. The 1LTE-L-H card provides fast, secure, reliable wireless access service for enterprise users. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 644 Basic functions Dials up to an LTE network to provide high-speed data transmission. Provides a backup link for a WAN link, to improve communication reliability between an enterprise's headquarters and branch networks. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 645 Indicators and Interfaces Figure 5-20 shows indicators on the 1LTE-L-H panel, and Table 5-23 describes the indicator states and meanings. Figure 5-20 Indicators on the 1LTE-L-H panel 1LTE-L-H Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 646 LTE/3G link. Off: The LTE/3G link has not been set up or is inactive. Figure 5-21 shows interfaces on the 1LTE-L-H card. Figure 5-21 Interfaces on the 1LTE-L-H card 1LTE-L-H Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 647 Packet Access Plus (DC-HSPA+), HSPA+, HSPA, Wideband Code Division Multiple Access (WCDMA), Global System for Mobile Communications (GSM), general packet radio system (GPRS), Enhanced Data rates for GSM Evolution (EDGE) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 648 IEC 60950-1 l BS EN 60950-1 l CSA C22.2 No 60950-1 l AS/NZS 60950.1 l IS 13252 For details, see the Huawei AR500&AR530&AR550&AR2500 Series Enterprise Routers Safety and Regulatory Compliance Information. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 649 For details, see the Huawei AR500&AR530&AR550&AR2500 Series Enterprise Routers Safety and Regulatory Compliance Information. Ordering Information To place an order, contact the Huawei local office. To download the system software, visit the Huawei Enterprise website (http://e.huawei.com). Table 5-26 provides the ordering information.
Page 650: Cables
6.12 DB25 Audio and Video Cable 6.13 3.5 mm Headset Cable 6.14 CVBS Video Cable 6.15 VGA Video Cable 6.16 HDMI Video Cable 6.17 20-Pin Boolean Input/Output Cable 6.18 Console Cable 6.19 8AS Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 651: Power Cables
4-pin power cable. Table 6-1 Pin assignments of a 4-pin power cable Connector P1 Connector P2 Wire Color Black ACC- Green ACC+ White Connection A 4-pin power cable is connected as follows: Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 652: 4-Pin Power Cable (With Terminals)
Pin Assignments Table 6-2 lists the pin assignments of a 4-pin power cable. Table 6-2 Pin assignments of a 4-pin power cable Connector P1 Label Signal Label1 12 V Label2 Label3 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 653: Esata Power And Signal Cable
SATA hard disk. Appearance and Structure Figure 6-3 shows the structure of an eSATA power and signal cable. Figure 6-3 Structure of an eSATA power and signal cable Pin1 Pin7 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 654 The 6-pin connector at the P2 end is connected to the SATA power jack on a router. The eSATA connector at the P3 end is connected to the eSATA interface on the router. Ordering Information Table 6-5 provides the eSATA power and signal cable ordering information. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 655 60 W power cable for open frame power supply. Table 6-6 Pin assignments of a 60 W open frame power supply cable Connector P1 Wire Color Connector P2 Blue Brown Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 656 Figure 6-5 Structure of a power adapter plate cable Main Label Specifications None Pin Assignments Table 6-8 lists the pin assignments of a power adapter plate cable. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 657 The AR530 series and AR550 series use 2-pin DC power cables with different wire sequences. Select the appropriate 2-pin DC power cable for the router you use. Appearance and Structure Figure 6-6 shows the structure of a 2-pin DC power terminal. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 658 RTN (+) NEG (-) Connection A 2-pin DC power cable is connected as follows: The 2-pin DC terminal block is connected to the DC power socket of an industrial switching router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 659 Boolean output cable. To meet current (lower than 2 A) and ambient temperature requirements, you are advised to use 3-pin phoenix connector (DO) output cables with 1.0 mm conductors. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 660 The 3-pin AC/DC input terminal block can be used for both AC and DC power cables. You can connect either AC or DC power cables to the terminal block as required, and connect the power cables to an external power supply system. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 661 Maximum Cross- Sectional Area Sectional Area 3-pin AC/DC power cable 0.5 mm or 20 AWG 2.5 mm or 12 AWG Pin Assignments None Connection 3-pin AC power cables are connected as follows: Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 662 Table 6-17 lists the pin assignments of a 4-pin DC power terminal (square shape). Table 6-17 Pin assignments of a 4-pin DC power terminal (square shape) Signal Red cable 12-24 V Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 663 Before making the power wires, understand the pin assignments and cable specifications. Appearance and Structure Figure 6-10 shows the structure of a 4-pin DC power terminal (circular shape). Figure 6-10 Structure of a 4-pin DC power terminal (circular shape) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 664 For three-wire power supply, insert wires L1, L2, L3, and N to the corresponding holes on the terminal block. Appearance and Structure Figure 6-11 shows the structure of a 4-pin AC power terminal. Figure 6-11 Structure of a 4-pin AC power terminal Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 665 Ordering Information Table 6-22 provides the 4-pin AC power terminal ordering information. Table 6-22 4-pin AC power terminal ordering information Part Number Description Remarks 14180357 Terminal Block, 4Pin, Standard configuration 24AWG-8AWG, 7.62mm Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 666 Attribute Description Power supply, 3.3 V 3.3 V power supply, supporting a maximum output current of 0.5 A DIDO0 IN/OUT, LVTTL Digital input/output pin, providing digital input by default after power- Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 667 – Connection of any of DI lines 3, 4, and 5: Connect one terminal on a switch to a DI line, and connect the other terminal on the switch to the GND line. Determine the levels on the DI lines according to Table 6-24. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 668 Determine the levels on the DO lines according to Table 6-25. Table 6-25 Levels on DO lines DO Lines 0, 1, 2 DO Lines 3, 4, 5 Low power High level High level Low power Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 669 An RS485/RS422 cable has a 5-pin terminal block at one end, and the other end can be connected to a meter or monitoring terminal. Appearance and Structure Figure 6-13 shows the structure of a 5-pin phoenix connector (RS485/RS422). Figure 6-13 Structure of a 5-pin phoenix connector (RS485/RS422) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 670 When using termination resistors, you must set the pull high/low resistors correctly to prevent electrical signals from being corrupted. Because a specific pull/low resistor value cannot suit all environments, the AR500 series routers use DIP switches to set the pull high/low resistor values for the serial port.
Page 671 Figure 6-14 Structure of a 5-pin M12 DC power terminal Pin Assignments Table 6-28 lists the pin assignments of a 5-pin M12 DC power terminal. Table 6-28 Pin assignments of a 5-pin M12 DC power terminal Connector P1 Connector P2 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 672 A 4-pin M12 DC power terminal can connect to an AR511GW-LM7 and AR503GW-LM7. The pin assignments vary according to the connected router. Table 6-29 lists the pin assignments of a power cable for the AR511GW-LM7. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 673 Wires at the other end are connected to electricity meters and digital input devices. Appearance and Structure Figure 6-16 shows the structure of an RS485 and DI cable. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 674 At the other end, the RS485 wires are connected to electricity meters or other devices that have RS485 interfaces, and the DI wires are connected to digital input devices. Ordering Information Table 6-32 provides the 8-pin phoenix connector (RS485/DI) ordering information. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 675 A 3G whip antenna is directly connected to an industrial switching router and is recommended for wall mounting scenarios. Appearance and Structure Figure 6-17 shows the appearance of a 3G whip antenna. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 677 LTE whip antennas are connected to the LTE main and diversity antenna interfaces of a router. LTE whip antennas are recommended in desk mounting and wall mounting scenarios. Appearance and Structure Figure 6-18 shows the appearance of an LTE whip antenna. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 678 SMA male connector (pin and screw threads inside) Frequency bands supported 698 MHz to 960 MHz/1710 MHz to 2690 Maximum gain 2 dBi/4.5 dBi Standing wave ratio Polarization Vertical Direction Omnidirectional Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 679 3 m feeder. LTE indoor remote antennas are recommended in cabinet/rack mounting scenarios. Appearance and Structure Figure 6-19 shows the appearance of an LTE indoor remote antenna. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 680 Table 6-38 Technical specifications of an LTE indoor remote antenna Item Description Connector type SMA male connector (pin and screw threads inside) Cable length Frequency bands supported 698 MHz to 960 MHz/1710 MHz to 2690 Maximum gain 1 dBi/0 dBi Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 681 An outdoor LTE antenna can be connected to the primary antenna interface of a router that is used outdoors. Appearance and Structure Figure 6-20 shows the appearance of an outdoor LTE antenna. Figure 6-20 Outdoor LTE antenna Figure 6-21 shows the appearance of a surge protector. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 682 LTE antenna. Table 6-40 Technical specifications of an outdoor LTE antenna Item Description Connector type Frequency bands supported 698 MHz to 960 MHz/1710 MHz to 2690 Maximum gain 1.5 dBi/2.5 dBi Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 683 Table 6-42 Technical specifications of 2 m and 3 m N-M/N-M outdoor extension cables Item Description Connector type N-M/N-M Insertion loss ≤ 22.64 dB/100 m @ 2000 MHz Standing wave ratio ≤ 1.15 @ 2000 MHz Characteristic impedance 50 ohm Length 2 m/3 m Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 684 2.5dBi, Isotropic, 20W, N50SF, NO Surge protector 19020282 Antenna Arrester, 20KA, 20V, Optional 698MHz-2700MHz, 20W, N/Male- N/Female, all 2 m N-M/N-M 04130032 RF Cable, 2m, N50SM-V, Optional outdoor COAX50-7.2/2.74B, N50SM-V, extension cable RG8 Jumper Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 685 LTE strip-shaped remote antenna. Figure 6-23 Structure of an LTE strip-shaped remote antenna SMA, male SMA, male Double-sided tape Technical Specifications Table 6-46 lists technical specifications of an LTE strip-shaped remote antenna. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 686 A 433 MHz RF remote antenna is delivered with a router that provides the radio frequency (RF) function. It is used on an RF antenna interface to provide RF access. Appearance and Structure Figure 6-24 shows the appearance of a 433 MHz RF remote antenna. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 687 428 MHz to 438 MHz Maximum gain 3 dBi Standing wave ratio Polarization Linear polarization Direction Omnidirectional Connection A 433 MHz RF remote antenna connects to the RF antenna interface of a router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 688 (RF) function. It is used on an RF antenna interface to provide RF access. Appearance and Structure Figure 6-25 shows the appearance of a 915 MHz RF remote antenna. Figure 6-25 915 MHz RF remote antenna Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 689 Omni-directional Antenna, remote antenna 824-960/1710-2170MHz,>=1.0dBi(824-960 MHz)&>=2.5dBi(1710-2170MHz),10W, 0r,SMA-Male 6.3.8 ZigBee Whip Antenna Description A ZigBee whip antenna is directly connected to an industrial switching router and is recommended for wall mounting scenarios. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 690 Frequency bands supported 2.4 GHz Maximum gain 2.65 dBi Standing wave ratio < 2.5 Polarization Vertical Direction Omnidirectional Connection An outdoor ZigBee antenna connects to a ZigBee antenna interface of a router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 691 An outdoor ZigBee antenna can be connected to the primary antenna interface of a router that is used outdoors. Appearance and Structure Figure 6-27 shows the appearance of an outdoor ZigBee antenna. Figure 6-27 Outdoor ZigBee antenna Figure 6-28 shows the appearance of a surge protector. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 692 ZigBee antenna. Table 6-54 Technical specifications of an outdoor ZigBee antenna Item Description Connector type Frequency bands supported 2400 MHz to 2500 MHz Minimum gain 8 dBi Standing wave ratio Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 693 Table 6-56 Technical specifications of 2 m and 3 m N-M/N-M outdoor extension cables Item Description Connector type N-M/N-M Insertion loss ≤ 22.64 dB/100 m @ 2000 MHz Standing wave ratio ≤ 1.15 @ 2000 MHz Characteristic impedance 50 ohm Length 2 m/3 m Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 694 N-Female, with bracket Surge protector 19020084 Antenna Feeder Arrester, 20KA, Optional Residual Voltage 20V, 1200~2500MHz, 50W, N-F/N-M 2 m N-M/N-M 04130032 RF Cable, 2m, N50SM-V, Optional outdoor COAX50-7.2/2.74B, N50SM-V, extension cable RG8 Jumper Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 695 Wi-Fi whip antenna: applicable to the series routers that support the Wi-Fi function. Appearance and Structure Figure 6-30 shows the appearance of a Wi-Fi rod antenna. Figure 6-30 Wi-Fi rod antenna Figure 6-31 shows the appearance of a Wi-Fi whip antenna. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 696 Wi-Fi whip antenna. Table 6-61 Technical specifications of a Wi-Fi whip antenna Item Specification Connector type RP-SMA-M Frequency bands supported 2400 MHz to 2500 MHz/5150 MHz to 5850 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 697 5W-0r-RP-SMA-J, without Bracket 6.3.11 Wi-Fi Remote Antenna (2x2) Description A Wi-Fi remote antenna (2x2) connects to a router at one end and to a plastic horizontal plane at the other end. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 698 A Wi-Fi remote antenna (2x2) is connected as follows: The SMA male connector is connected to the Wi-Fi interface on a router. The other end (cover) is attached to a plastic horizontal plane. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 699 Wi-Fi remote antenna (3x3). Figure 6-33 Structure of a Wi-Fi remote antenna (3x3) Wi-Fi Wi-Fi Wi-Fi Cover Technical Specifications Table 6-66 lists technical specifications of a Wi-Fi remote antenna (3x3). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 700 A Wi-Fi rod remote antenna consists of a Wi-Fi rod antenna and a 3 m Wi-Fi feeder. Appearance and Structure Figure 6-34 shows the structure of a Wi-Fi rod remote antenna. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 701 Figure 6-35. Figure 6-35 Connection of a Wi-Fi extension cable SMA, female SMA, female Male WiFi extension cable Technical Specifications None Connection A Wi-Fi rod remote antenna is connected as follows: Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 702 None 6.3.15 GPS/BDS Remote Antenna Description A GPS/BDS remote antenna connects to the GPS/BDS interface of a router at one end and to a plastic horizontal plane at the other end. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 703 The SMA male connector is connected to the GPS/BDS interface on a router. The other end (cover) is attached to a plastic horizontal plane. Ordering Information Table 6-69 provides the GPS/BDS remote antenna ordering information. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 704 When using an LTE/GPS extension cable, connect its SMA male connector to the router and its female connector to the SMA male connector of the primary LTE remote antenna (square shape), as shown in Figure 6-39. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 705 6.3.17 Primary LTE Remote Antenna (Circular Shape) Description A primary LTE remote antenna (circular shape) has a 3.0 m feeder. Appearance and Structure Figure 6-40 shows the structure of a primary LTE remote antenna (circular shape). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 706 Appearance and Structure Figure 6-41 shows the structure of a GPS+LTE remote diversity antenna (square shape). Figure 6-41 Structure of a GPS+LTE remote diversity antenna (square shape) SMA, male Cover SMA, male Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 707 DIV interfaces of a router respectively. The other end (cover) of the antenna is attached to a plastic horizontal plane. Ordering Information Table 6-71 provides the GPS+LTE remote diversity antenna (square shape) ordering information. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 708 The SMA male connectors of the antenna are connected to the GPS and LTE DIV interfaces of a router respectively. The other end (cover) of the antenna is attached to a horizontal plane. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 709 The SMA male connectors at one end are connected to the GPS/BDS and LTE DIV interfaces of a router respectively. The other end (cover) of the antenna is attached to a horizontal plane. Ordering Information None 6.3.21 DTMB Remote Antenna Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 710 Table 6-72 Technical specifications of a DTMB remote antenna Item Specification Connector type SMA-J Cable length Frequency bands supported 470 MHz to 860 MHz Maximum gain 2 dBi Standing wave ratio < 2.5 Polarization Vertical polarization Direction Omnidirectional Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 711 The sub-GHz antenna is recommended when an industrial switching router is installed in a cabinet or rack. Appearance and Structure Figure 6-46 shows the appearance of a sub-GHz antenna. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 713 A serial cable (CON/RS232) has an 8-pin RJ-45 connector at one end and an RJ-45 or another type of connector at the other end. Appearance and Structure Figure 6-47 shows the structure of a serial cable. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 714 It is connected as follows: The 8-pin RJ45 connector is connected to a serial port of the router. The other end is connected to a serial port terminal. Ordering Information None 6.5 6-pin Serial Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 715 RS485_N Label5 RS232_TX Label6 RS232_RX Connection A 6-pin serial cable is connected as follows: The 6-pin terminal block at one end is connected to the 6-pin Mini-Fit interface on a router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 716 White and blue Orange Green White and brown White and brown Brown Brown Depending on whether RJ45 connectors at both ends comply with the same standard, Ethernet cables are classified into two types: Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 717 X1 (RJ45) Wire Color X2 (RJ45) White and orange Orange White and green Blue White and blue Green White and brown Brown Table 6-80 lists the pin assignments of a crossover cable. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 718 In this case, the two interfaces can be connected by either a straight-through cable or a crossover cable. Ordering Information None 6.7 RS232 Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 719 An RS232 cable is connected as follows: The DB9 male connector is connected to the RS232 interface of a router. The DB9 female connector is connected to a maintenance terminal, generally a computer. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 720 The M4 lug is connected to the ground point on an industrial switching router. The M6 lug is connected to the ground point or equipotential terminal on a cabinet. Ordering Information Table 6-83 provides the ground cable ordering information. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 721 Figure 6-52 Structure of a standard telephone cable Pin Assignments Table 6-85 lists the pin assignments of a standard telephone cable. Table 6-85 Pin assignments of a standard telephone cable X1 (RJ11) Signal Direction X2 (RJ11) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 722 A single-mode optical fiber and a multimode optical fiber have the same appearance but different colors. A single-mode optical fiber is yellow and a multimode optical fiber is orange. Appearance and Structure Figure 6-53 shows the structure of an LC/PC single-mode optical fiber. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 723 An optical fiber is a carrier of optical signals and transmits optical signals over a short distance. An optical fiber is connected as follows: One end is connected to an optical interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 724 Optional Single mode, G.652D, 2mm, 14130276 Patch Cord, LC/PC-SC/PC, Optional Single mode, G.652D, 2mm, 14130312 Patch Cord, LC/PC-SC/PC, Optional Single mode, G.652D, 2mm, 14130253 Patch Cord, FC/PC-SC/PC, Optional Singlemode, G.652D, 3mm, Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 725 Patch Cord, FC/PC-LC/PC, Optional Multimode, A1B, 2mm, 14130223 Patch Cord, LC/PC-SC/PC, Optional Multimode, A1B, 2mm, 14130279 Patch Cord, LC/PC-SC/PC, Optional Multimode, A1B, 2mm, 14130275 Patch Cord, LC/PC-SC/PC, Optional Multimode, A1B, 2mm, Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 726 Table 6-89 Pin assignments of an audio cable Connector P1 Connector P2 Wire Color IN-GND White OUT-L-GND Green OUT-R-GND Black OUT-L Blue OUT-R Yellow Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 727 DB25 audio and video cable. Figure 6-58 Structure of a DB25 audio and video cable Pin Assignments Table 6-91 describes the required specifications of a DB25 audio and video cable. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 728 04052028 Audio Video&Control Optional Signal Cable,Video Signal Cable,0.3m,D25F,(UL2919 28AWG*3P+28AWG*5C) +SYV75-2/0.34(S) +2*20UL1007B,D15F +BNC75SM-III+2*Transfer connector 1pin,Only for AR515C 6.13 3.5 mm Headset Cable Description A 3.5 mm headset cable provides one audio output. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 729 A CVBS video cable connects a router to a video terminal. The cable connects to the router through the DVI-I connector and connects to the video terminal through the BNC connector. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 730 CVBS video cable ordering information. Table 6-95 CVBS video cable ordering information Part Number Description Remarks 02210787 Auxiliary Tool, AR511GW- Mandatory LAV2M3-CVBS Video cable-DVI to BNC,NULL, AR511GW-LAV2M3 Vehicle-mounted Special Material Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 731 Table 6-96 Pin assignments of a VGA video cable Connector P1 Wire Color Connector P2 Red coaxial wire Red coaxially wound wire Green coaxial wire Green coaxially wound wire Blue coaxial wire Blue coaxially wound wire Orange Purple Gray Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 732 HDMI interfaces of the router and video terminal respectively. Appearance and Structure Figure 6-62 shows the structure of an HDMI video cable. Figure 6-62 Structure of an HDMI video cable Pos.2 Pos.1 Pos.19 Pos.18 Pos.18 Pos.19 Pos.1 Pos.2 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 733 The HDMI connector at the P1 end is connected to the HDMI video interface on a router. The HDMI connector at the P2 end is connected to the HDMI video interface on a video terminal, for example, an advertising screen. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 734: 20-Pin Boolean Input/Output Cable
20-pin Boolean input/output cable. Figure 6-63 Structure of a 20-pin Boolean input/output cable Label1 Label2 Label3 Label4 Label5 Label6 Label7 Label8 Label9 Label10 Label11 Label12 Label13 Label14 Label15 Label16 Label17 Label18 Label19 Label20 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 735 The 20-pin connector at one end is connected to the 20-pin Mini-Fit interface on a router. Wires at the other end are connected to a digital input device, and the AI analog input is connected to an external analog voltage. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 736: Console Cable
Figure 6-64 Structure of a console cable RJ45 Pin Assignments Table 6-102 lists the pin assignments of a console cable. Table 6-102 Pin assignments of a console cable X1 (RJ45) Signal Direction X2 (DB9) → ← Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 737: 8As Cable
Table 6-104 Types and application scenarios of 8AS cables Cable Type Application Scenario Description Straight-through cable Financial dumb terminal The pin assignments at both ends of the cable are the same. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 738 Straight-Through Cable: Connecting to a Financial Dumb Terminal Figure 6-65 shows the structure of a straight-through cable. Figure 6-65 Structure of a straight-through cable Main Label Table 6-105 lists the pin assignments of a straight-through cable. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 739 Table 6-106 Pin assignments of an adapter cable X1 (Male) Signal Direction X2 (Female) Blue ← → Orange ← White and brown White and blue Green ← → White and green Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 740 Table 6-107 lists the pin assignments of a straight-through cable. Table 6-107 Pin assignments of a straight-through cable X1 (RJ45) Signal Direction X2 (RJ45) ← → ← ← → ← → Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 741 Orange → White and brown ← White and blue Green ← White and green → Brown ← → White and orange Figure 6-69 shows the structure of an asynchronous serial cable. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 742 X2 (RJ45) Signal Direction X1 (DB25) X3 (DB9) → → → ← ← ← ← Self-made Cable: Connecting to a Serial Port Server Figure 6-70 shows the structure of a self-made cable. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 743 Table 6-110 Pin assignments of a self-made cable X1 (8AS) Signal Direction X2 (console) ← → ← ← → ← → Figure 6-71 shows the pin connections of a self-made cable. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 744 Serial port server connection: Connect the X1 end (RJ45) of a self-made cable to an 8AS card, and the X2 end (RJ45) to a serial port server. Ordering Information Table 6-111 provides the 8AS cable ordering information. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 745 MP8-II, FTP Adapter cable 04042329 Single Cable, Optional MP8(S)-III, CC8C0.32P296U(S) , MP8-II,0.12m, Transit Cable Asynchronous serial 04021299 Single Cable, Optional cable Auxiliary Port Cable, 3m, D25M, 2*CC4P0.32P296U( S), DB9M+MP8-VI, QuidwayR2501, W2215 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 746: Pluggable Modules For Interfaces
The methods provided here are only for reference. To confirm whether optical modules you use have been certified by Huawei, contact Huawei Technical Assistant Center (TAC). If the optical modules you use are delivered after July 1, 2013, use either of the following methods to determine whether they have been certified by Huawei.
Page 747: Risks Of Using Non-Huawei-Certified Optical Modules
7 Pluggable Modules for Interfaces Hardware Description Method 1: Check for "HUAWEI" on the Label If an optical module has been certified by Huawei, its label contains "HAUWEI", as shown in Figure 7-1. Figure 7-1 "HUAWEI" on the label of a Huawei-certified optical module Method 2: Run the display transceiver Command If an optical module meets the following conditions, it has been certified by Huawei.
Page 748: Understanding Optical Modules
As a result, data on the suspended bus cannot be read. Improper edge connector size damages electronic devices of optical interfaces. If a non-Huawei-certified optical module with improper edge connector size is used on an optical interface, electronic devices of the optical interface will be damaged by short circuits.
Page 749: Types Of Optical Modules
The higher transmission rate an optical module provides, the more complex structure it has. Optical modules are encapsulated in different modes to provide different structures. Huawei routers support optical modules of the following encapsulation types: SFP, eSFP, SFP+, XFP, and QSFP+.
Page 750 1 km. 1000base-LX/LH (IEEE Uses one Rx single-mode fiber and 802.3ah) one Tx single-mode fiber to transmit data at 1 Gbit/s over a distance within 40 km. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 751 10 Gbit/s over a distance within 40 km. 10Gbase-ZR (IEEE Uses one Rx single-mode fiber and 802.3) one Tx single-mode fiber to transmit data at 10 Gbit/s over a distance within 80 km. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 752: Parameter Description
Optical fibers are classified into single-mode and multimode fibers. Generally, multi- mode fibers have large core diameters and severe dispersion, so they transmit optical signals over short distances. Single-mode fibers have small dispersion and can transmit optical signals over long distances. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 753: How To View Optical Module Parameters
Modules for Interfaces" in the Hardware Description to look up parameters of the optical module, including the center wavelength, transmission distance, fiber types supported, receive optical power, and transmit optical power. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 754: Understanding Copper Modules
Figures of optical modules provided in this document are only for reference and may be different from the actually delivered optical modules. l All the optical modules described in this document have been certified by Huawei. 7.4.1 SFP/eSFP Optical Module...
Page 755 Huawei AR500&AR510&AR531&AR550&1500&AR2500 Industrial Switch Routers 7 Pluggable Modules for Interfaces Hardware Description Figure 7-3 Appearance of an SFP/eSFP optical module Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 756 GE copper module. Figure 7-4 Appearance of a GE copper module FE Optical Module Table 7-2 Table 7-3 list the attributes and optical parameters of an FE optical module. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 757 ≤ -34.0 -10.0 SM1310/02311KYE eSFP-STM1-LH80- 1550 -5.0 to 0 ≤ -34.0 -10.0 SM1550/02311KYF GE Optical Module Table 7-4 Table 7-5 list the attributes and optical parameters of a GE optical module. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 758 -10.0 to -2.5 ≤ -17.0 OGSC10DD0/02310 1310 -9.5 to -3.0 ≤ -20.0 -3.0 OGSC40DD0/02310 1310 -5.0 to 0 ≤-22.5 -3.0 GE Copper Module Table 7-6 lists the attributes of a GE copper module. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 759: Sfp+ Modules
NOTE The optical port must support copper modules. 7.4.2 SFP+ Modules Appearance Figure 7-5 shows the appearance of an SFP+ optical module. Figure 7-5 Appearance of an SFP+ optical module Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 760 Table 7-8 Optical parameters of a 10GE optical module Model/Part Center Transmit Receiver Overload Extinction Number Wavelen Optical Sensitivi Optical Ratio (dB) gth (nm) Power ty (dBm) Power (dBm) (dBm) OSX010N05/340605 1310 -8.2 to 0.5 ≤ -14.4 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 761: Assembly Box
Table 8-1 Devices that can be installed in the IP65 enclosure assembly box Enclosure Supported Devices Assembly Box IP65 enclosure AR502EGRz-L assembly box AR502EGRz-Lc Appearance and Structure Figure 8-1 shows the appearance of the IP65 enclosure assembly box. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 762 Figure 8-1 Appearance of the IP65 enclosure assembly box Schematic diagram for removing the USB interface cover from the back of the IP65 enclosure assembly box Internal structure of the IP65 enclosure assembly box Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 763 A 60 W AC power module is integrated inside the IP65 enclosure assembly box to provide the power supply. Figure 8-2 shows the appearance of the 60 W AC power module. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 764 AR500&AR510&AR531&AR550&1500&AR2500 Industrial Switch Routers 8 Assembly Box Hardware Description Figure 8-2 60 W AC power module Figure 8-3 shows the interface panel and indicator of the 60 W AC power module. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 766 Wall-mounted or pole-mounted Interface density Two-wire PG interface Environment parameters Storage temperature -40°C to +70°C (-40°F to +158°F) Operating temperature -25°C to +60°C (-13°F to +140°F) Operating relative humidity 5% to 95%, noncondensing Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 767 ≤ 5000 m NOTE If the altitude is higher than 2000 m, derating needs to be performed according to GB/ T3859.2-93. Storage altitude ≤ 5000 m (16404 ft.) BOM number 50030199 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
Page 768: Open Source Software Notice
9 Open Source Software Notice Hardware Description Open Source Software Notice In V200R005C60 and later versions, you can run the display copyright command in the user view to view the open source software notice. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.

This manual is also suitable for:

Ar510 series Ar531 series Ar550 series Ar1500 series Ar2500 series Ar502eg-l ... Show all

Huawei AR500 Series Hardware Description

About this Document

1 Using the Hardware Query Tool

2 Version Requirements for Components

3 Chassis

5 Cards

6 Cables

Quick Links

Related Manuals for Huawei AR500 Series

Summary of Contents for Huawei AR500 Series

This manual is also suitable for:

Table of Contents