Huawei AR500 Series Hardware Description page 308

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
5
7
Indicator Description
Figure 3-51
Figure 3-51 Indicators on the AR509CG-Lt-7
1
3
5
6
7
Issue 10 (2019-03-06)
LAN interfaces: four GE electrical
interfaces
NOTE
l GE0 is a management interface and is
used to upgrade the router.
l All GE LAN interfaces can be configured
as WAN interfaces.
Power jack
NOTE
Use a DC power cable to connect the router
to an external power source.
shows the indicators on the AR509CG-Lt-7.
AR509CG-Lt-7
Copyright © Huawei Technologies Co., Ltd.
6 Config button
NOTE
l The configuration button is used to
l Holding down the button for 5s or longer
l Holding down the button for less than 5
l Restoring the factory settings will cause
8 Two SIM card slots
NOTE
l The router supports double-card single-
l If only one SIM card needs to be
2
4
8
CON RS232
MGMT GE0 GE1
restore the factory settings and switch
between console and RS232 interfaces.
will restart the router and restore the
factory settings.
seconds will switch from the factory
default console management interface to
the RS232 interface.
service interruption. Exercise caution
when using this button.
standby, and SIM1 is the default master
card.
installed, install it in slot SIM1.
GE2 GE3
Config
9
3 Chassis
297