Huawei AR500 Series Hardware Description page 266

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
together. The primary antenna transmits and receives 3G/LTE signals, and the secondary
antenna helps improve the quality of received 3G/LTE signals.
a 3G/LTE antenna interface.
Table 3-158 3G/LTE antenna interface attributes
Attribute
Connector type
Standards
compliance and
frequency bands
supported
Rate
Cable type
GPS Antenna Interface
A GPS antenna interface can connect to a GPS+LTE remote diversity antenna to provide the
GPS positioning function.
Table 3-159 GPS antenna interface attributes
Attribute
Connector type
Issue 10 (2019-03-06)
Description
SMA-K (screw threads outside and a hole inside)
l FDD LTE: Band 1/2/3/5/7/8/20/28, all bands with diversity
l WCDMA/HSDPA/HSUPA/HSPA+: Band 1/2/5/8, all bands with
diversity
l SM/GPRS/EDGE: 850/900/1800/1900 (MHz)
l GPS/GLONASS: L1
l General Packet Radio Service (GPRS): uplink rate of 85.6 kbit/s
and downlink rate of 85.6 kbit/s
l Enhanced Data Rates for GSM Evolution (EDGE): uplink rate of
236.8 kbit/s and downlink rate of 236.8 kbit/s
l Wideband Code Division Multiple Access circuit switched
(WCDMA CS): uplink rate of 64 kbit/s and downlink rate of 64
kbit/s
l WCDMA packet switched (PS): uplink rate of 384 kbit/s and
downlink rate of 384 kbit/s
l High Speed Packet Access Plus (HSPA+): uplink rate of 5.76
Mbit/s and downlink rate of 21.6 Mbit/s
l Dual Carrier High Speed Packet Access Plus (DC-HSPA+):
uplink rate of 5.76 Mbit/s and downlink rate of 42 Mbit/s
l Frequency Division Duplex-Long Term Evolution (LTE FDD):
uplink rate of 50 Mbit/s @20M BW cat3 and downlink rate of
150 Mbit/s
l LTE primary antenna interface:
l LTE diversity antenna interface:
antenna
Table 3-159 lists attributes of a GPS antenna interface.
Copyright © Huawei Technologies Co., Ltd.
Table 3-158
Primary LTE remote antenna
GPS+LTE remote diversity
Description
SMA-K (screw threads outside and a hole
inside)
3 Chassis
lists attributes of
255