Product Overview; Controls - Toro e-Dingo 500 Operator's Manual

Product Overview

1. Attachment mount plate
2. Tilt cylinder
3. Auxiliary hydraulic couplers
4. Loader arms

Controls

Control Panel
1. InfoCenter
2. Loader-arm lever
3. Traction-control levers
4. Attachment-tilt lever
5. Cylinder lock
6. Battery box
7. Lift cylinder
8. Wheel
Figure 4
5. Auxiliary-hydraulics lever
6. Key switch
7. Eco-mode switch
8. Inch-mode switch
Figure 3
9. Handle
10. Lift point
11. Control panel
12. Parking-brake lever
Key Switch
The key switch has 2 positions: O
4).
Use the key switch to start or shut off the machine;
refer to Shutting Off the Machine (page 16)
Shutting Off the Machine (page
Traction-Control Levers
•
To move forward, move the traction-control levers
forward.
•
To move rearward, move the traction-control levers
rearward.
•
To turn, move the lever located on the side you
want to turn back toward the N
g281978
while keeping the other lever engaged.
Note:
The farther you move the traction-control
levers in either direction, the faster the machine
moves in that direction.
•
To slow or stop, move the traction-control levers
to the N
EUTRAL
Attachment-Tilt Lever
•
To tilt the attachment forward, slowly push the
attachment-tilt lever forward.
•
To tilt the attachment rearward, slowly pull the
attachment-tilt lever rearward.
9
13. Thigh support
14. Counterweight
15. Operator platform
and O
N
16).
EUTRAL
position.
g281979
(Figure
FF
and
position