Toro e-Dingo 500 Operator's Manual page 12

InfoCenter Menus
To access the InfoCenter menu system, press the
menu access button
This will bring you to the main menu. Refer to the
following tables for a synopsis of the options available
from the menus:
Main Menu
Menu Item
Faults
Service
Diagnostics
Settings
About
Faults
Menu Item
Current
Last
First
Occurrences
while at the main screen.
Description
The FAULTS menu contains
a list of the recent machine
faults. Refer to the Service
Manual or your Authorized
Toro Dealer for more
information on the FAULTS
menu.
The Service menu contains
information on the machine
such as hours of use and other
similar numbers.
The Diagnostics menu
displays the state of each
machine switch, sensor and
control output. You can use
this to troubleshoot certain
issues as it will quickly tell you
which machine controls are on
and which are off.
The Settings menu allows
you to customize and modify
configuration variables on the
InfoCenter display.
The About menu lists the
model number, serial number,
and software version of your
machine.
Description
Lists the total number of
key-on hours (i.e., hours that
the key has been in the O
N
position).
Indicates the last key-on hour
that the fault occurred on.
Indicates the first key-on hour
that the fault occurred on.
Indicates the number of fault
occurrences.
Service
Menu Item
Hours
Counts
Diagnostics
Menu Item
Battery
Motor control
Settings
Menu Item
Language
Backlight
Contrast
Protected Menus
About
Menu Item
Model
Serial
S/W Rev
Motor Ctrl SW
Battery SW
12
Description
Lists the total number of hours
that the key, motor, and Eco
Mode have been on and the
traction controls have been
engaged.
Lists the number of times the
motor has been started and
the amperage hours for the
battery.
Description
Indicates the inputs and
outputs for the battery. Inputs
include the current battery
voltage; outputs include the
battery current and percentage
state of charge.
Indicates the inputs and
outputs for the motor control.
Inputs include key run,
neutral, parking brake,
auxiliary, Inch, Eco mode,
and raise/lower; use these
to check input feedback on
the machine. Outputs include
motor speed (in rpm), phase
current, DC current, controller
temperature, and motor
temperature.
Description
Controls the language used
on the InfoCenter.
Controls the brightness of the
LCD display
Controls the contrast of the
LCD display.
Allows you to access
protected menus by inputting
a passcode.
Description
Lists the model number of the
machine
Lists the serial number of the
machine
Lists the software revision of
the master controller.
Lists the software revision of
the motor control.
Lists the software revision of
the battery.