Table of Contents
Advertisement
Product Overview
1. Hood
2. Auxiliary hydraulic
couplers
3. Mount plate
4. Track
5. Cylinder lock
6. Loader arm
7. Lift cylinder
Figure 3
8. Tie-down point
9. Fuel gauge
10. Control panel
11. Auxiliary-hydraulics lock
pedal
12. Operator platform
13. Parking brake
Controls
Become familiar with all the controls
you start the engine and operate the traction unit.
Control Panel
g314194
1. Reference bar
2. Message display
3. Power socket
4. Plug
5. Traction-enable switch
6. Auxiliary hydraulics lever
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
Starting the Engine (page
Throttle Lever
g366357
Move the control forward to increase the engine speed
and rearward to decrease speed.
Reference Bar
When driving the traction unit, use the reference bar
as a handle and a leverage point for controlling the
traction control and the auxiliary-hydraulics lever. To
ensure smooth, controlled operation, do not take
your hands off the reference bars while operating the
machine.
10
(Figure
Figure 4
7. Throttle lever
8. Key switch
9. Loader lock
10. Loader-arm/attachment-tilt
lever
11. Traction control
, R
, and S
. Refer to
FF
UN
TART
19).
4) before
g337136
Advertisement
Table of Contents
