Maintenance; Maintenance Safety; Recommended Maintenance Schedule(S) - Toro e-Dingo 500 Operator's Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.
CAUTION
If you leave the key in the switch, someone could accidently start the machine and seriously
injure you or other bystanders.
Remove the key from the switch and disconnect the power before you perform any
maintenance.

Maintenance Safety

•
Park the machine on a level surface, disengage
the auxiliary hydraulics, lower the attachment,
engage the parking brake, shut off the machine,
and remove the key. Wait for all movement to stop
and allow the machine to cool before adjusting,
cleaning, storing, or repairing it.
•
Do not allow untrained personnel to service the
machine.
•
Use jack stands to support the components when
required.
•
Carefully release pressure from components
with stored energy; refer to
Pressure (page 33).
•
Disconnect the battery before making any repairs;
refer to Disconnecting the Main Power (page

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
Before each use or daily
Every 25 hours
Every 100 hours
Every 400 hours
Every 1,500 hours or
2 years, whichever
comes first
Yearly
Yearly or before storage
Relieving Hydraulic
29).
Maintenance Procedure
• Torque the wheel-lug nuts.
• Replace the hydraulic filter.
• Grease the machine. (Grease immediately after every washing.)
• Check the static strap; replace it if worn or missing.
• Check the tire treads.
• Test the parking brake.
• Remove debris from the machine.
• Check for loose fasteners.
• Check the hydraulic lines for leaks, loose fittings, kinked lines, loose mounting
supports, wear, weather, and chemical deterioration.
• Check the hydraulic-fluid level.
• Torque the wheel-lug nuts.
• Replace the hydraulic filter.
• Replace all moving hydraulic hoses.
• Change the hydraulic fluid.
• Touch up chipped paint.
•
Keep your hands and feet away from the moving
parts. If possible, do not make adjustments with
the machine running.
•
Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.
•
Do not tamper with the safety devices.
•
Use only Toro-approved attachments.
Attachments can change the stability and the
operating characteristics of the machine. You may
void the warranty if you use the machine with
unapproved attachments.
•
Use only genuine Toro replacement parts.
•
If any maintenance or repair requires the loader
arms to be in the raised position, secure the arms
in the raised position with the hydraulic-cylinder
lock(s).
27