Specifications; Attachments/Accessories; Before Operation; Before Operation Safety - Toro e-Dingo 500 Operator's Manual

Specifications

Note:
Specifications and design are subject to
change without notice.
Width
Length
Height
Weight (without attachment)
Rated operating capacity—with 74.8
kg (165 lb) operator and the standard
bucket
Tipping capacity—with 74.8 kg (165 lb)
operator and the standard bucket
Wheelbase
Dump height (with standard bucket)
Reach—fully raised (with standard
bucket)
Height to hinge pin (narrow bucket in
standard position)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Operation

Before Operation

89 cm (35 inches)
152 cm (62 inches)

Before Operation Safety

125 cm (49 inches)
938 kg (2,068 lb)
General Safety
234 kg (515 lb)
•
590 kg (1,300 lb)
71 cm (28 inches)
•
120 cm (47 inches)
71 cm (28 inches)
•
168 cm (66 inches)
•
•
•
•
•
•
•
•
13
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age or require certified training of
the operator. The owner is responsible for training
all operators and mechanics.
Become familiar with the safe operation of the
equipment, operator controls, and safety decals.
Always engage the parking brake, shut off the
machine, remove the key, wait for all moving
parts to stop, and allow the machine to cool
before adjusting, servicing, cleaning, or storing
the machine.
Know how to stop the machine and shut off the
machine quickly.
Check that the safety switches and shields are
attached and functioning properly. Do not operate
the machine unless they are functioning properly.
Locate the pinch-point areas marked on the
machine and attachments; keep your hands and
feet away from these areas.
Before operating the machine with an attachment,
ensure that the attachment is properly installed
and that it is a genuine Toro attachment. Read all
the attachment manuals.
Evaluate the terrain to determine what accessories
and attachments you need to properly and safely
perform the job.
Have the property or work area marked for buried
lines and other objects, and do not dig in marked
areas; note the location of unmarked objects and
structures, such as underground storage tanks,
wells, and septic systems.
Inspect the area where you will use the equipment
for uneven surfaces or hidden hazards.
Ensure that the area is clear of bystanders before
operating the machine. Stop the machine if a
bystander enters the area.