Safety And Instructional Decals; Product Overview; Specifications; Maximum Material Density At Capacity - Toro TX 1000 Operator's Manual

Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger. Replace any decal that is
damaged or missing.
1. Tipping hazard—read the Operator's Manual; for the TX
1000, do not exceed loads of 417 kg (600 lb); for other
models, do not exceed loads of 172 kg (380 lb).
133-0221
133-8061

Product Overview

Specifications

Note:
Specifications and design are subject to
change without notice.
Width
Length
Height
Weight
Capacity
SAE struck capacity
decal133-0221
Heaped capacity
Maximum Load
TX 1000
Other models
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
decal133-8061
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Maximum Material Density at
Capacity
The density of the materials moved by the bucket
varies and, therefore, so does the amount of material
that the bucket can carry before reaching the
maximum load rating. The first 2 tables lists the
density of material that can be carried, both heaped
and struck (i.e., leveled off), in the bucket. The
Material Density table lists common materials and
their densities.
TX 1000
Bucket Capacity
Struck (leveled) bucket
Heaped bucket
Note: Maximum density = Maximum load rating / Capacity
Other Models
Bucket Capacity
Struck (leveled) bucket
Heaped bucket
5
132 cm (53 inches)
74 cm (29 inches)
43 cm (17 inches)
115 kg (253 lb)
0.25 m 3 (9.0 ft 3 )
0.30 m 3 (10.5 ft 3 )
417 kg (600 lb)
172 kg (380 lb)
Maximum Density
1641 kg/m 3 (102 lb/ft 3 )
1404 kg/m 3 (87 lb/ft 3 )
Maximum Density
677 kg/m 3 (42 lb/ft 3 )
579 kg/m 3 (36 lb/ft 3 )