Huawei PowerCube 5000 User Manual page 78

PowerCube 5000
User Manual (SmartLi 100Ah)
Figure 3-16 Installing an auxiliary support
Step 3 Install ESMs. The address of the ESM above the BCU in the right cabinet must be always 1
(the first ESM displayed on the SBCU), and the address of the ESM at the bottom layer in the
left cabinet must always be the last value (the last ESM displayed on the SBCU). If a cabinet
is not fully configured, the vacant slots are always on the top of the cabinet and covered by
filler panels.
Place ESMs from bottom to top and from left to right. To prevent falling over due to
overweight, ensure that the cumulative height of ESMs in the right cabinet is one ESM greater
than or equal to the cumulative height of ESMs in the left cabinet.
Figure 3-17 ESM layout
(1) ESM layout (even number)
Issue 02 (2020-03-17) Copyright © Huawei Technologies Co., Ltd.
(2) ESM layout (odd number)
3 Installation
70