Huawei PowerCube 5000 User Manual page 108

PowerCube 5000
User Manual (SmartLi 100Ah)
Figure 5-1 Settings Wizard
Table 5-2 Settings Wizard
Item
Language
Time
System
Param.
Issue 02 (2020-03-17)
Parameter
N/A
N/A
Single/Parallel
Parallel ID
(displayed in a
parallel system)
DG Number
Battery Type
Number of cabinet's
HSU
Output Volt Level
(V)
Copyright © Huawei Technologies Co., Ltd.
Setting
Select a desired language.
Set to the local time and date.
Set this parameter as required.
When the value is set to 1, the cabinet is the master
cabinet. When the value is set to 2, the cabinet is
the slave cabinet.
Set this parameter as required.
NOTE
Changing the number of DGs will restore the following
parameters to their default values: AC load connection
voltage (Battery module), AC load disconnection voltage
(Battery module), Battery module charging voltage,
Module battery LVD voltage, and Module battery LVD
voltage.
5 Power-on Commissioning
100