Huawei PowerCube 5000 User Manual page 68

PowerCube 5000
User Manual (SmartLi 100Ah)
Step 4 (In a parallel system) Remove the screws from the front and rear connecting kits, route the
connecting kits through the reserved holes, connect the two cabinets, and tighten the screws.
Figure 3-3 Installing connecting kits
Step 5 Remove the support of the waterproof plate, install the support on the top of the cabinet, and
then install the waterproof plate.
Issue 02 (2020-03-17) Copyright © Huawei Technologies Co., Ltd.
3 Installation
60