VS-EC-H24R&H28R&H29R
User Guide
4.1 Configuring PTZ Settings
Purpose:
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ
parameters should be done before you set the PTZ camera.
Before you start:
Check that the PTZ and the DVR are connected properly through RS-485 interface.
Steps:
Step 1
Enter the PTZ Settings interface, as shown in Figure 4-1.
Menu > Camera > PTZ
Figure 4-1 PTZ- General
Step 2
Choose the camera for PTZ setting next to Camera label.
Step 3
Enter the parameters of the PTZ camera.
All the parameters should be exactly the same as the PTZ camera parameters.
Step 4
Click "Apply" button to save and exit menu.
Issue 04 (2013-06-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 PTZ Controls
4
PTZ Controls
32