Table of Contents
Advertisement
VS-EC-H24R&H28R&H29R
User Guide
No.
Name
MENU/WIPER
PREV/FOCUS-
PTZ l/IRIS
7
IR Receiver
8
JOG SHUTTLE Control
ALARM
READY
STATUS
9
HDD
MODEM
TX/RX
Issue 04 (2013-06-15)
Function Description
Pressing the MENU/WIPER button will return
the user to the Main menu (after successful
login). Pressing and holding the button for 5
seconds will turn off audible key beep. The
MENU/WIPER button will also bring up
Sensitivity Interface settings. In PTZ Control
mode, the MENU/WIPER button will start
wiper (if applicable).
The PREV/FOCUS- button is used to switch
between single screen and multi-screen mode.
In PTZ Control mode, it is used to adjust the
focus in conjunction with the A/FOCUS+
button. It can also be used to select entire
masked areas, such as in Motion Detection and
Privacy Mask menus.
The PTZ/IRIS- button is used to enter the PTZ
Control mode. When in the PTZ Control mode,
it is used to close the iris of the PTZ camera.
Receiver for IR remote.
The JOG SHUTTLE control can be used to
move the active selection in a menu. It will
move the selection up and down. In the
Playback mode, the ring is used to jump 30s
forward/backward in video files. In Live View
mode, it can be used to cycle through different
channels.
Alarm indicator turns red when a sensor alarm
is detected.
Ready indicator is normally green, indicating
that the DVR is functioning properly.
Status indicator turns green when DVR is
controlled by an IR remote. Indicator turns red
when controlled by a keyboard and purple when
IR remote and keyboard is used at the same
time.
HDD indicator blinks red when data is being
read from or written to HDD.
Reserved for future usage.
TX/RX indictor blinks green when network
connection is functioning properly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Introduction
7
Advertisement
Table of Contents
