Setting Alarm Response Actions - Huawei VS-EC-H24R User Manual

VS-EC-H24R&H28R&H29R
User Guide
Please refer to "8.6 Setting Alarm Response Actions" for detailed alarm response
actions.
Figure 8-17 Exceptions Setup Interface

8.6 Setting Alarm Response Actions

Purpose:
Take alarm response actions will be activated when an alarm or exception occurs,
including Full Screen Monitoring, Audible Warning (buzzer), Notify Surveillance
Center, Upload Picture to FTP, Trigger Alarm Output and Send Email.
Full Screen Monitoring
When an alarm is triggered, the local monitor (VGA or BNC monitor) display in full
screen the video image from the alarming channel configured for full screen
monitoring.
If alarms are triggered simultaneously in several channels, their full-screen images will
be switched at an interval of 10 seconds (default dwell time). A different dwell time
can be set by going to Manu > Configuration >Live View> Alarm Picture Dwell Time.
Auto-switch will terminate once the alarm stops and you will be taken back to the Live
View interface.
Issue 04 (2013-06-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Alarm Settings
158