Table of Contents
Advertisement
VS-EC-H24R&H28R&H29R
User Guide
3.1 Introduction of Live View
Live view shows you the video image getting from each camera in real time. The DVR
will automatically enter Live View mode when powered on. It is also at the very top of
the menu hierarchy, thus hitting the ESC many times (depending on which menu you're
on) will bring you to the Live View mode.
Live View Icons
In the live view mode, there are icons at the right top of the screen for each channel,
showing the status of the record and alarm in the channel, so that you can know
whether the channel is recorded, or whether there are alarms occur as soon as possible.
The live view icons are listed in Table 3-1.
Table 3-1 Description of Live View Icons
Icons
3.2 Operations in Live View Mode
In live view mode, there are many functions provided. The functions are listed below.
Single Screen: show only one screen on the monitor.
Multi-screen: show multiple screens on the monitor simultaneously.
Auto-switch: the screen is auto switched to the next one. And you must set the
dwell time for each screen on the configuration menu before enabling the
auto-switch. Menu>Configuration>Live View>Dwell Time.
All-day Playback: play back the recorded videos for current day.
Aux/Main output switch: the DVR will check the connection of the output
interfaces to define the main and auxiliary output interfaces. The priority level for
the main and aux output is HDMI>VGA>CVBS. This means if the HDMI is used
Issue 04 (2013-06-15)
Description
Alarm (video loss, tampering, motion detection or sensor
alarm)
Record (manual record, schedule record, motion
detection or alarm triggered record)
Alarm & Record
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Live View
3
Live View
22
Advertisement
Table of Contents
