Configuring Privacy Mask - Huawei VS-EC-H24R User Manual

VS-EC-H24R&H28R&H29R
User Guide
Step 8
If you want to copy the OSD settings of the current camera to other cameras, click the
"Copy" to enter the Copy Camera interface, as shown in Figure 11-2.
Figure 11-2 Copy Settings to Other Cameras
Step 9
Select the camera (s) to be configured with the same OSD settings. You can also click
the checkbox of Analog to select all cameras.
Step 10 Click the "OK" to finish the Copy settings and back to the OSD Configuration
interface.
Step 11 Click the "Apply" to apply the settings
---End

11.2 Configuring Privacy Mask

You are allowed to configure the four-sided privacy mask zones that cannot be viewed
by the operator.
Step 1
Enter the Privacy Mask Settings interface.
Menu > Camera > Privacy Mask
Step 2
Select the camera to set privacy mask.
Step 3
Click the checkbox of "Enable Privacy Mask" to enable this feature, as shown in Figure
11-3.
Issue 04 (2013-06-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Camera Settings
207