Huawei VS-EC-H24R User Manual page 167

VS-EC-H24R&H28R&H29R
User Guide
You must select during "Trigger Channel" settings the channel(s) you want to make full
screen monitoring.
Audible Warning
Trigger an audible beep when an alarm is detected.
Notify Surveillance Center
Sends an exception or alarm signal to remote alarm host when an event occurs. The
alarm host refers to the PC installed with Remote Client.
The alarm signal will be transmitted automatically at detection mode when remote alarm
host is configured. Please refer to"9.2.6 Configuring Remote Alarm Host" for details of
alarm host configuration.
Upload Captured Pictures to FTP
Capture the image when an alarm is triggered and upload the picture to a FTP server.
Please set up FTP address and the remote FTP server first.
Email Linkage
Send an email with alarm information to a user or users when an alarm is detected.
Please refer to "9.2.10 Configuring Email" for details of Email configuration.
Trigger Alarm Output
Trigger an alarm output when an alarm is triggered.
Step 1
Enter Alarm Output interface.
Menu > Configuration > Alarm > Alarm Output
Select an alarm output and set alarm name and dwell time. Click "Schedule" to set the
arming schedule of alarm output, as shown in Figure 8-18.
If "Manually Clear" is selected in the dropdown list of Dwell Time, you can clear it only by
going to Menu > Manual > Alarm.
Issue 04 (2013-06-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Alarm Settings
159