Table of Contents
Advertisement
VS-EC-H24R&H28R&H29R
User Guide
10.4.2 Setting HDD Property
The HDD property can be set to redundancy, read-only or read/write (R/W). Before
setting the HDD property, please set the storage mode to Group (refer to step1~4 of
"10.4.1 Setting HDD Groups").
A HDD can be set to read-only to prevent important recorded files from being
overwritten when the HDD becomes full in overwrite recording mode.
When the HDD property is set to redundancy, the video can be recorded both onto the
redundancy HDD and the R/W HDD simultaneously so as to ensure high security and
reliability of video data.
Step 1
Enter the HDD Information interface.
Menu > HDD > General
Step 2
Select HDD from the list and click the
interface, as shown in Figure 10-16.
Figure 10-16 Set HDD Property
Step 3
Set the HDD property to R/W, Read-only or Redundancy.
Step 4
Click the "OK" to save the settings and exit the interface.
Step 5
In the HDD Information menu, the HDD property will be displayed in the list.
At least 2 hard disks must be installed on your DVR when you want to set a HDD to
Redundancy, and there is one HDD with R/W property.
---End
Issue 04 (2013-06-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
icon to enter the Local HDD Settings
10 HDD Management
199
Advertisement
Table of Contents
