Checking Hdd Status - Huawei VS-EC-H24R User Manual

VS-EC-H24R&H28R&H29R
User Guide
Step 7
Click the "OK" to finish the Copy settings and back to the Storage Mode interface.
Step 8
Click the "Apply" to apply the settings.
If the quota capacity is set to "0", then all cameras will use the total capacity of HDD for
record and picture capture.
---End

10.6 Checking HDD Status

You may check the status of the installed HDDs on DVR so as to take immediate check
and maintenance in case of HDD failure.
Checking HDD Status in HDD Information Interface
Step 1
Enter the HDD Information interface.
Menu > HDD > General
Step 2
Check the status of each HDD which is displayed on the list, as shown in Figure 10-20.
Figure 10-20 View HDD Status (1)
If the status of HDD is Normal or Sleeping, it works normally. If the status is Uninitialized
or Abnormal, please initialize the HDD before use. And if the HDD initialization is failed,
please replace it with a new one.
----End
Issue 04 (2013-06-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 HDD Management
202