Network Settings; Configuring General Settings - Huawei VS-EC-H24R User Manual

VS-EC-H24R&H28R&H29R
User Guide

9.1 Configuring General Settings

Network settings must be properly configured before you operate DVR over network.
Step 1
Enter the Network Settings interface, as shown in Figure 9-1.
Menu > Configuration>Network
Figure 9-1 Network Settings Interface
Step 2
Select the "General" tab.
Step 3
In the "General Settings" interface, you can configure the following settings: Working
Mode,NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS Server.
There are two 10M/100M/1000M NIC cards provided by the device, and it allows the
device to work in the Multi-address, Load Balance and Net-fault Tolerance modes.

Multi-address Mode: The parameters of the two NIC cards can be configured
independently. You can select LAN1 or LAN2 in the NIC type field for parameter
settings. You can select one NIC card as default route. And then the system is
connecting with the extranet the data will be forwarded through the default route.
Issue 04 (2013-06-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9

Network Settings

9 Network Settings
164