Checking Network Traffic - Huawei VS-EC-H24R User Manual

VS-EC-H24R&H28R&H29R
User Guide
Step 5
Configure the following Email settings:

Enable Server Authentication (optional): Check the checkbox to enable the
server authentication feature.

User Name: The user account of sender's Email for SMTP server authentication.

Password: The password of sender's Email for SMTP server authentication.

SMTP Server: The SMTP Server IP address or host name (e.g.,
smtp.263xmail.com).

SMTP Port No.: The SMTP port. The default TCP/IP port used for SMTP is 25.

Enable SSL(optional): Click the checkbox to enable SSL if required by the SMTP
server.

Sender: The name of sender.

Sender's Address: The Email address of sender.

Select Receivers: Select the receiver. Up to 3 receivers can be configured.

Receiver: The name of user to be notified.

Receiver's Address: The Email address of user to be notified.

Enable Attached Pictures: Check the checkbox of "Enable Attached Picture" if
you want to send email with attached alarm images. The interval is the time of two
adjacent alarm images. You can also set SMTP port and enable SSL here.

Interval: The interval refers to the time between two actions of sending attached
pictures.

E-mail Test: Sends a test message to verify that the SMTP server can be reached.
Step 6
Click the "Apply" to save the Email settings.
Step 7
You can click the "Test" to test whether your Email settings work. The corresponding
Attention message box will pop up. Refer to Figure 9-22.
Figure 9-22 Email Testing Attention
---End

9.3 Checking Network Traffic

You can check the network traffic to obtain real-time information of DVR such as
linking status, MTU, sending/receiving rate, etc.
Enter the Network Traffic interface, as shown in Figure 9-23.
Menu > Maintenance > Net Detect
Issue 04 (2013-06-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Network Settings
183