Main Menu - Toro Groundsmaster 3300 Series Operator's Manual

1. Display screen
•
To access the main menu: Hold down the
display-screen button until the menu items appear
on the screen.
•
To select a menu item: Quickly press the
display-screen button twice.
You can also perform this action to toggle an
option (e.g., toggling between English or metric
units in the S
ETTINGS
•
To return to the previous screen (e.g., returning
to the M M
AIN ENU
screen, or returning to the main-information
screens from the M
the display-screen button until the previous screen
appears.
•
To scroll down to the next menu item: Press
the display-screen button once.
Understanding the Menu Items

Main Menu

Menu Item
F
AULTS
S
ERVICE
D
IAGNOSTICS
Figure 29
2. Display-screen button
screen).
screen from the S
ETTINGS
M screen): Hold down
AIN ENU
Description
Contains a list of the recent
machine faults. Refer to
the Service Manual or your
authorized Toro distributor
for more information on the
F menu.
AULTS
Contains information on the
machine such as hours of use,
counts and DPF regeneration.
Refer to the Service (page 28)
table.
Lists various states and data
that the machine currently has.
You can use this information
to troubleshoot certain issues,
as it quickly tells you which
machine controls are on/off
and lists control levels (e.g.,
sensor values).
Main Menu (cont'd.)
S
ETTINGS
A
BOUT
g297898
Service
Menu Item
H
OURS
C
OUNTS
DPF R
EGENERATION
Settings
Menu Item
U
NITS
L
ANGUAGE
B
ACKLIGHT
C
ONTRAST
P M
ROTECTED ENUS
P S
ROTECT ETTINGS
PTO S
OFTSTART
S S I
LOPE ENSOR
Diagnostics
28
Allows you to customize and
modify configuration variables
on the InfoCenter display.
Refer to the
28) table.
Lists the model number, serial
number, and software version
of your machine. Refer to the
About (page 29)
Description
Lists the total number of hours
that the key, engine, and PTO
have been on.
Lists the number of engine
and PTO starts.
Allows you to control
DPF settings; refer
to Understanding the
Diesel-Particulate Filter
and Regeneration (page
Description
Controls the units used on the
display screen. The menu
choices are English or metric.
Controls the language used
on the display screen.
Controls the brightness of the
display screen.
Controls the contrast of the
display screen.
Allows a person authorized
by your company with the
PIN code to access protected
menus (i.e., the slope sensor
setting and the ability to clear
the fault log).
When disabled, you can
access protected settings
without entering the PIN code.
: Enables or disables the PTO
Softstart feature. This feature
is enabled by default.
Shows whether or not a
NSTALLED
slope sensor is installed. If
a slope sensor is removed
from the machine, this setting
can be disabled to clear the
slope-sensor communication
fault.
Settings (page
table.
31).