Commissioning - Siemens 7XV5654-0BA00 Manual

4.3

Commissioning

Fasten the device to a symmetric DIN rail as per EN 50022.
²
Check if the operational data match the values on the name plate. Do not change anything on the device.
²
Carefully latch the fiber-optic connections using the bayonet closure.
²
Insert the existing D-sub socket and screw it in place.
²
Connect the fault-signaling connection to the terminals.
²
Switch on the auxiliary voltage.
²
When the green LED Run lights up, the device is ready for operation.
Accessories, Sync Transceiver, Optical/Electrical Converter for Time Synchronization, Manual
C53000-G9050-C168-1, Edition 09.2019
Assembly and Commissioning

4.3 Commissioning

41